Page 1
Product Instruction
For your safety, please read this manual carefully before using this product.
一、 In order to protect you from injury and property damage, we clearly explain what you
should follow:
A) Warning! It may cause serious injuries or even casualties.People should consult the doctor
before using implantable medical devices (such as using pacemaker).Please install your
equipment 50 centimeters away from this product because it may influence the operation of
implantable medical device.
B) Attention! It may cause fever, fire and electric shock.
1) Do not put the product in water or other liquids, avoid water into the product;
2) Do not touch the AC adapter with wet hands to ensure the safety and integrity of the adapter
3) Do not let dust accumulate on this product and adapter
4) Do not use this product under the temperature of -10℃——40℃;
5) Do not use it in the places of direct sunlight or high temperature;
6) Do not charge too close to magnetic sheets, magnetic recording media and precision
instruments
7) Do not decompose and transform this product
8) Do not put any metal objects between the distance charging transmitting board and the
charging mobile phone;
9) When using plugs and other connections, do not exceed the rated value
10) When using, please make sure that you have connected the AC adapter correctly to avoid
any damage. Unplug AC adapter from plug when stopping using it.
11) Do not use travel converters
12) Do not let your children use it until they know how to use it.
二、 Charging method of distance charging
Diagram for using and installing:
①—— Mobile phone
②——Marble, glass, wood, plastic and other non-metallic tabletop
Page 2
③——Wireless distance charger
④ ——Adapter
1） Connect the product to an adapter that outputs 24-31Vdc or any device with an output voltage of
24-31Vdc;
2） If the distance charging product detects that there is no equipment to be charged in the charging
area, the product will be on standby.
3） Put the device (mobile phone) to be charged directly in the charging area of the product, the
device enter the charging state, and the blue light is on;
4） After charging, the product is standby, the blue light is on, then take it away.
5） If there is a metal some-like in the charging area (the center of the coil), blue and green light
flicker alternately and will disconnect distance charging to protect equipment
三、 Product parameter:
1）Product model: WCP BL 03 series Distance charging products
2）Product name: Wireless distance charger
3）Dimension: Length is 142mm, Width is 94.5mm, and height is 14.2mm
4）Main function: distance charging launcher
5）Product application: All distance charging devices under QI standard
7）Charging type: One-to-one charging in corresponding area
8）Input voltage: 24-31Vdc
9）Launch distance: 15-30mm
10）Charging power: 10W(MAX)
11）Charging way: Induction mode
12）Working frequency: 110.5—130KHz
Page 3
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B digital
device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not installed and
used in accordance with the instructions,may cause harmful interference to radio
communications.However,there is no guarantee that interference will not accor in a particular
installation.if this equipmemt does cause harmful interference to radio or television reception,which
can be determined by turning the equipment off and on,the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is
connectec.
• Consult the dealer or an experienced technician for help.
This equipment should be installed and operated with a minumum distance of 20 cm between the
device and your body.
Loading...