This manual contains information that is proprietary to RADWIN Ltd. (RADWIN hereafter). No
part of this publication may be reproduced in any form whatsoever without prior written
approval by RADWIN.
Right, title and interest, all information, copyrights, patents, know-how, trade secrets and
other intellectual property or other proprietary rights relating to this manual and to the
RADWIN products and any software components contained therein are proprietary products
of RADWIN protected under international copyright law and shall be and remain solely with
RADWIN.
The RADWIN name is a registered tradem ark of RA D WIN Ltd. No right, license, or interest to
such trademark is granted hereunder, and you agree that no such right, license, or interest
shall be asserted by you with respect to such trademark.
You shall not copy, reverse compile or reverse assemble all or any portion of the User Manual
or any other RADWIN documentation or products. You are prohibited from, and shall not,
directly or indirectly, develop, market, distribute, license, or sell any product that supports
substantially similar functionality based or derived in any way from RADWIN products.Your
undertaking in this paragraph shall survive the termination of this Agreement.
This Agreement is effective upon your opening of a RADWIN product package and shall
continue until terminated. RADWIN may terminate this Agreement upon the breach by you of
any term thereof. Upon such termination by RADWIN, you agree to return to RADWIN any
RADWIN products and documentation and all copies and portions thereof.
For further information contact RADWIN at the address below or contact your local distributor.
Disclaimer
The parameters quoted in this document must be specifically confirmed in writing before they
become applicable to any particular order or contract. RADWIN reserves the right to make
alterations or amendments to the detail specification at its discretion. The publication of
information in this document does not imply freedom from patent or other rights of RADWIN,
or others.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50pi
RADWIN Worldwide Offices
Corporate Headquarters
27 Habarzel Street
Tel Aviv, 69710
Israel
Tel: +972 3 766 2917
Support Headquarter
27 Habarzel Street
Tel Aviv, 69710
Israel
Tel: +972 3 766 2900
Mobile: +972 54 766 0044
RADWIN North America
900 Corporate Drive
Mahwah, NJ 07430
USA
Tel (1): 1 800 444 7234 / 341
Tel (2): +1 201 529 1100 / 341
Latin America Headquarters
Rua Grao Mogol 828
Belo Horizonte, MG 30310-010
Brazil
Tel (1): +55 31 919 76 402
Tel (2): +972 54 758 6808
India Headquarters
Mohan Co-operative Industrial Estate
E-13, B-1 Extn
New Delhi, 110044
India
Tel: +91 11 4053 9180
APAC Headquarters
1 Jalan Kuala #13-01
The Morningside, 239639
Singapore
Tel: +65 9878 3004
Indonesia Sales Office
Jl. Jenderal Sudirman Kav. 86
Jakarta, 10220
Indonesia
Tel: +62 8138 570 0657
Philippines Sales Office
37A. A luna St. West Rembo
Makati City, 1200
Philippines
Tel: +63 2882 6886
Mobile: +63 91 789 23427
China Sales Office
Asian Games Village
Huiyuan Gongyu J1312
Beijing 100101
China
Tel: +86 010 8498 0629
For technical support contact:support@radwin.com
For technical support in India only, contact: support-india@radwnin.com
For sales support contact:sales@radwin.com
Website: www.radwin.com
RADWIN 1000/2000/5000 User ManualVersion 2.6.50pii
Regulatory Compliance
General Note
This system has achieved Type Approval in various countries around the world. This means
that the system has been tested against various local technical regulations and found to
comply. The frequency bands in which the system operates may be “unlicensed” and in these
bands, the system can be used provided it does not cause interference.
FCC/IC - Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules and ICES-003 of IC. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible
for compliance (RADWIN Ltd.) could void the user's authority to operate the equipment.
It is the responsibility of the installer to ensure that when using the outdoor
antenna kits in the United States (or where FCC rules apply), only those
antennas certified with the product are used. The use of any antenna other
Warning
Caution
Caution
than those certified with the product is expressly forbidden in accordance to
FCC rules CFR47 part 15.204.
In accordance to IC standard RSS-Gen - To reduce potential radio
interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p) is not more
than that permitted for successful communication
Outdoor units and antennas should be installed ONLY by experienced
installation professionals who are familiar with local building and safety
codes and, wherever applicable, are licensed by the appropriate government
regulatory authorities. Failure to do so may void the product warranty and
may expose the end user or the service provider to legal and financial
liabilities. Resellers or distributors of this equipment are not liable for injury,
damage or violation of regulations associated with the installation of outdoor
units or antennas. The installer should configure the output power level of
antennas according to country regulations and antenna type.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50piii
The antenna used for this transmitter must be installed to provide a
separation distance of at least 225cm from all persons and must not be colocated or operated in conjunction with any other antenna or transmitter.
Warning
This product was tested with special accessories - indoor unit (IDU or
PoE), FTP Cat 5e shielded cable with sealing gasket, 12 AWG grounding
cable - which must be used with the unit to insure compliance.
Warning
Indoor Units comply with part 15 of the FCC rules and ICES-003 standard. Operation is
subject to the following two conditions:
(1) These devices may not cause harmful interference.
(2) These devices must accept any interference received, including interference that may
cause undesired operation.
Canadian Emission Requirements for Indoor Units
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numẻrique de la classe B est conforme ả la norme NMB-003 du Canada.
Safety Practices
Applicable requirements of National Electrical Code (NEC), NFPA 70; and the National
Electrical Safety Code, ANSI/IEEE C2, must be considered during installation.
NOTES:
1. A Primary Protector is not required to protect the exposed wiring as long as the exposed
wiring length is limited to less than or equal to 140 feet, and instructions are provided to
avoid exposure of wiring to accidental contact with lightning and power conductors in
accordance with NEC Sections 725-54 (c) and 800-30.
In all other cases, an appropriate Listed Primary Protector must be provided. Refer to Articles
800 and 810 of the NEC for details.
2. For protection of ODU against direct lightning strikes, appropriate requirements of NFPA
780 should be considered in addition to NEC.
3. For Canada, appropriate requirements of Section 60 of the CEC 22.1should be considered
as applicable.
4. E1/T1 ports are intended for connection to indoor lines only and are not exposed to
outdoor plants.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50piv
Table of Contents
Notice....................................................................................................................... i
RADWIN Worldwide Offices.................................................................................... ii
Regulatory Compliance.............................................................................................. iii
RADWIN 1000/2000/5000 User ManualVersion 2.6.50pxi
List of Tables
TABLE 1-1 AVAILABLE ODU PRODUCTS - RELEASE 2.6.50P ......................................................1-8
ABLE 1-2 RELEASE 2.1 IDU-C PRODUCTS...........................................................................1-8
T
ABLE 3-1 COMPONENTSOFAN IDU-C FRONTPANEL............................................................3-10
T
ABLE 3-2 IDU-C FRONT PANEL LEDS..............................................................................3-11
T
ABLE 4-1 PC REQUIREMENTSFORTHE RADWIN MANAGER APPLICATION...................................4-1
T
ABLE 4-2 RADWIN MANAGER: OFFLINE FUNCTIONALITY........................................................4-7
T
ABLE 4-3 DEFAULT SETTINGS...........................................................................................4-9
T
ABLE 4-4 FRONT PANEL LEDS........................................................................................4-10
T
ABLE 4-5 RADWIN MANAGERMAINMENUFUNCTIONALITY ...................................................4-11
T
ABLE 4-6 RADWIN MANAGER TOOLBAR..........................................................................4-12
T
ABLE 4-7 LINK INSTALLATION WIZARD .............................................................................4-13
T
ABLE 4-8 RADWIN 1000/2000/5000 TRANSMISSIONRATES...............................................4-22
T
ABLE 5-1 RADWIN MANAGER TOOLBAR............................................................................5-3
T
ABLE 5-2 RADWIN MANAGERMAINMENUFUNCTIONALITY .....................................................5-4
T
ABLE 5-3 LINK DETAILS..................................................................................................5-6
T
ABLE 5-4 LINKSITEDETAILS, SITE A AND SITE B.............................. ...................................5-7
T
ABLE 5-5 STATUSBARINDICATORS....................................................................................5-9
T
ABLE 5-6 LINK CONFIGURATION WIZARD ..........................................................................5-10
T
ABLE 6-1 ODU MODECONFIGURATIONFORCOMMON...........................................................6-11
T
ABLE 6-2 TELNET COMMANDS ........................................................................................6-20
T
ABLE 7-1 GET DIAGNOSTICS DATAAND DESCRIPTION............................................................7-2
T
ABLE 7-2 LINK COMPATIBILITY TRAP MESSAGES ...................................................................7-3
T
ABLE 7-3 EXPLANATIONOFPERFORMANCEDATA....................................................................7-8
T
ABLE 7-4 ACTIONOFTHETOOLBARBUTTONS.......................................................................7-9
T
ABLE 7-5 RADWIN MANAGER TRAP MESSAGES..................................................................7-11
T
ABLE 7-6 ACTIVE ALARMSCOMMANDBUTTONS ...................................................................7-15
T
ABLE 7-7 LED FAULTINDICATORS ...................................................................................7-16
T
ABLE 7-8 TROUBLESHOOTING.........................................................................................7-16
T
ABLE B-1 ODU-IDU CONNECTOR PINOUT.......................................................................... B-1
T
ABLE B-2 FAST ETHERNET CONNECTOR PINOUT................................................................... B-2
T
ABLE B-3 IDU-C ALARM CONNECTOR (DRY-CONTACT) ......................................................... B-3
T
ABLE B-4 TERMINAL BLOCK 3-PIN -48VDC........................................................................ B-4
T
ABLE C-1 BILLOF MATERIALS: ODU MOUNTINGKIT............................................................. C-1
T
ABLE F-1 LATITUDEANDLONGITUDELOCATIONSOF TDWRS.................................................F-11
T
ABLE G-1 SUPPORTED RFC 1213 VARIABLES...................................................................... G-4
T
ABLE G-2 PRIVATE MIB PARAMETERS ............................................................................... G-5
T
ABLE G-3 MIB TRAPS ................................................................................................. G-18
T
ABLE H-1 OUTPUT ALARMS PINOUT.................................................................................. H-1
T
RADWIN 1000/2000/5000 User ManualVersion 2.6.50pxii
Welcome!
Chapter 1
Introduction
Welcome to the RADWIN 1000/2000/5000 radio series, designed for the IP
and WiMAX Backhaul, Private Networks and Broadband Access global markets. The RADWIN 1000/2000/5000 series is an innovation in high-capacity
carrier-grade sub-6GHz radios, and designed to meet the requirements of
current and next-generation markets and applications. RAD WIN 1000/2000/
5000 also features software configurable antenna port activation enabling
single (RADWIN 1000) or dual (RADWIN 2000) antenna port operation. The
RADWIN 5000 series is identifier for software configured Point to Multipoint
devices. The device configured as RADWIN 2000 has an advanced air-interface based on MIMO, antenna diversity.
The RADWIN 1000/2000 radio series offers unmatched performance and
carrier-class quality with the following features:
•Superior spectral efficiency at 5, 10, 20MHz and 40MHz channels in
the 5.3, 5.4 and 5.8 GHz spectrum bands.
•High Ethernet capacity (up to 270Mbps at 40MHz channel bandwidth.)
•Combo frequency products for maximum flexibility
•Advanced air-interface based on MIMO, built-in diversity and OFDM
technologies
•Superior range performance
•Simple installation and management
•High Tx power
The RADWIN 1000/2000 radio series supports the 2.4, 4.9, 5.3, 5.4 and 5.8
GHz spectrum bands, and complies with international standards and regulations (FCC, IC Canada). The 5.8 GHz spectrum band complies with FCC rule
47 CFR Part 15 subparts C and E.
The RADWIN 5000 radio series supports 4.9, 5.3, 5.4 and 5.8 GHz spectrum
bands, and complies with international standards and regulations (FCC, IC
Canada). The 5.8 GHz spectrum band complies with FCC rule 47 CFR Part
15 subparts C and E.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-1
Key Applications Chapter 1
The model RADWIN 1000 RW-1020-0150 / RADWIN 2000 RW-2020-0150
supports the 2.4GHz band and complies with FCC and IC standards.
The RADWIN 1000 3GHz Band / RADWIN 2000 3GHz Band / RADWIN 5000
3GHz Band support the 3.5 and 3.65 GHz spectrum bands and comply with
FCC and IC standards.
Key Applications
WiMAX and IP Backhaul
The RADWIN 1000/2000/5000 radio series offers WiMAX oper ators and ISPs
a unique, highly scalable and cost-effective backhaul solution. Designed to
suit a wide range of topologies, RADWIN 1000/2000/5000 is easy to install
and maintain, enabling operators to quickly and efficiently expand their networks and introduce new services to a growing subscriber base.
Figure 1-1: Typical Wimax and IP Backhaul application
Broadband Access
With RADWIN 1000/2000/5000, service providers can quickly and efficiently
expand their networks, and provide high-capacity services that meet the
increasing demand for high-quality, high-speed broadband.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-2
Private Networks Chapter 1
Figure 1-2: Typical Broadband Access application
Private Networks
RADWIN 1000/2000/5000 is the ultimate solution for private networks such
as enterprises, education, government and utility organizations that wish to
own and manage their own networks and eliminate the costly recurring
charges from service providers.
RADWIN 1000/2000/5000's cost-effective solution enables a v ariety of organizations to connect geographically dispersed sites at ranges of up to 80km
(50 miles).
Figure 1-3: Private Network
Key Features of RADWIN 1000/2000/5000
Some of the outstanding features of the RADWIN 1000/2000/5000 radio
series are as follows:
High Capacity
The RADWIN 1000/2000 system provides a high-capacity link of up
to 270Mbps at 40MHz channel bandwidth.
Superior Spectral Efficiency
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-3
Key Features of RADWIN 1000/2000/5000 Chapter 1
Built on advanced MIMO and OFDM technologies, the RADWIN
1000/2000 system provides a high-capacity link at channel bandwidth of 40MHz. This channel bandwidth supports high robustness
of the air interface under interference and harsh conditions. In countries where applicable, narrow channel bandwidth reduces the cost
of the spectrum license.
Advanced Air Interface
The RADWIN 1000/2000/5000 system provides an advanced airinterface based on MIMO, built-in diversity and OFDM technologies,
resulting in an exceptionally robust air interface.
Using the following technologies, the RADWIN 1000/2000/5000 air
interface is designed to ensure nonstop, high quality transmission,
even under interference and harsh conditions:
•Automatic Adaptive Rate (AAR) is a mechanism that dynamically adapts the air interface rate by changing both the signal
modulation and coding.
•Automatic Channel Selection (ACS) chooses the best channel by
monitoring the available radio channels and dynamically selecting a channel which is best suited for transmission at any given
time.
•Automatic Repeat Request (ARQ) is a mechanism for error control during data transmission. When the receiver detects an
error in the received information, it automatically requests the
transmitter to resend the information. This process is repeated
until the transmission is error free or the error continues
beyond a predetermined number of maximum transmissions.
RADWIN 1000/2000/5000's ARQ mechanism is optimized for
time-critical traffic.
•Forward Error Correction (FEC) with very low o verhead and
algorithms specifically designed for the varying conditions of
license-exempt frequency bands, ensuring fast, robust and
error-free communications.
High transmission (Tx) power of 29.95dBm
The RADWIN 1000/2000/5000 system supports high Tx power, compliant with radio regulations. High Tx power increases the system's
availability and range, and enables the high performance with
smaller antennas, thus reducing the total cost of the solution (lower
CAPEX), installation and tower rent costs (lower OPEX).
Superior range performance
The RADWIN 1000/2000/5000 system supports high capacity at
superior ranges. The Link Budget Calculator (appendix D) is used to
determine the capacity and range according to the choice of product, antenna, type of service and environmental conditions.
Simple installation and management
RADWIN 1000/2000/5000 systems are extremely simple to install
and maintain. They are typically up and running in less than an hour.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-4
RADWIN 1000/2000/5000 Link Chapter 1
The RADWIN Manager application has full local and remote management capabilities. The user-friendly SNMP based management tool
provides full end-to-end configuration, event logging, and performance monitoring capabilities.
Enhanced Security
The security features of RADWIN 1000/2000/5000 include:
•RADWIN 1000/2000/5000's AES 128-bit integrated advanced
encryption support provides enhanced air interface security for
carriers and private networks. It ensures user data protection
with one of the most sophisticated commercially available combined encryption and authentication techniques, CCM/AES. This
technique combines message authentication (preventing antispoofing and replay protection) with commercial encryption,
and complies with the IEEE 802.11i (phase iii) security recommendations.
CCM/AES uses a symmetric 128-bit encryption key (EK), and a
nonce, and provides both message encryption and authenticating signature. The nonce mechanism enables the receiver to
remember already received genuine messages and reject all
replayed messages.
•Initial encryption and authentication is based on a user-defined
master key (Link Password). While standard Wireless LAN
encrypts only the Ethernet Payload, the AES encrypts both the
source and destination MAC addresses.
•In addition to normal login access, Read or Write Community
access is available at login
RADWIN 1000/2000/5000 Link
The RADWIN 1000/2000 point-to-point solution is a wireless communication
link. RADWIN 5000 is a point-to-multipoint topology solution. Typically each
side of the link is comprised of an Outdoor Unit (ODU) and antenna and an
Indoor Unit (IDU) or PoE device as shown in figure 1-4 below.
The link is managed by the SNMP-based RADWIN Manager application.
The IDU and the ODU are connected by a CAT5e cable that carries the ser-
vice traffic and power.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-5
The Radio Outdoor Unit (ODU) Chapter 1
Figure 1-4: Example of Link Architecture - System Components
The Radio Outdoor Unit (ODU)
The ODU is the radio transceiver of the RADWIN 1000/2000/5000 system.
It supports two radios for MIMO operation. It is av ailable with an integr ated
antenna (
antenna (
The ODU may be mounted on a pole or a wall, and connects to the IDU or
PoE device using a CAT5e cable.
Integrated Antenna ODU
Connectorized ODU
).
) or with connectors for an external
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-6
The Radio Outdoor Unit (ODU) Chapter 1
The ODU comes in two form factors as shown in figure 1-5 below:
a. Connectorized ODU - Frontb. Connectorized ODU - Rear
c. Integrated Antenna ODU Front
Figure 1-5: ODU Form Factors
•Integrated Antenna ODU
This ODU has an integrated 370mm (1.2ft) flat panel antenna, with
a gain of 23dBi. The ODU contains both the radio and the antenna
as a single unit housed in a weatherproof case.
•Connectorized ODU
This ODU has 2x N-type connectors for connecting an external
antenna.
d. Integrated Antenna ODU Rear
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-7
The Indoor Units (IDU) Chapter 1
The ODU products available in release 2.6.50p are shown below:
Table 1-1: Available ODU Products - Release 2.6.50p
Description
Part Number
Form FactorFrequency Bands and Regulations
RW-2050-0150
RW-5550-0150
RW-2050-0250
RW-2020-0150
RW-1020-0150
RW-1030 3 GHz BAND
RW-2030 3 GHz BAND
RW-2030 3 GHz BAND
RW-5200-0250
RW-5550-0250
The only available external antenna is, single bipolar.
Integrated antenna
Connectorized for external antenna (2x N-type)
Integrated and connectorized antenna (2x N-Type)
Connectorized for external antenna (2 x N-type)
For further information, see page 4-20, Installing the Link: Step 4, Tx
The IDU-C has the service ports and provides aggregation of these services
towards the ODU that transports them over the air. The IDU-C also provides
power to the ODU.
The IDU-C is a carrier-class 19 inch, 1U unit, providing two Ethernet ports,
dry contact alarms and indication LEDs. It has two DC power feed connectors. An AC to DC converter is available for powering the IDU-C from an AC
source. The IDU-C is designed to be rack mounted.
One IDU-C product is available in release 2.6.50p:
Table 1-2: Release 2.1 IDU-C Products
Part Number
7200-20002
Ethernet
ports
Power
Dual DC feed
-20 to -60VDC
Form
factor
19" 1U
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-8
Power Over Ethernet (PoE) Devices Chapter 1
Figure 1-6: IDU-C Front Panel
IDU-E
The IDU-E is a carrier grade, compact, half 19 inch wide, 1U plastic unit,
providing up to two Ethernet ports and up to two E1/T1 interfaces. It offers
Layer 2 support for Ethernet service and HSS support for collocated links. It
is a low cost unit intended for both Access applications and Enterprise use.
Figure 1-7: IDU-E - front view
The IDU-E rear panel (right to left) has a 25 pin Dry Contact Alarms port.
the two (or no) trunk ports, two LAN ports, an ODU port and finally a 3 pin
DC power plug identical to that used on the IDU-C.
Figure 1-8: IDU-E: Rear panel
Power Over Ethernet (PoE) Devices
The PoE device provides Ethernet service only, with power for the ODU. The
PoE device is extremely compact, having only two Ethernet ports and a
standard 3 pin male AC power socket.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-9
Antennas Chapter 1
Figure 1-9: PoE device - showing the radio Ethernet port
Antennas
An antenna is the radiating and receiving element from which the radio signal, in the form of RF power, is radiated to its surroundings and vice versa.
The antenna gain and transmitting power may be limited by country regulations.
The RADWIN 1000/2000/5000 may be operated with an integrated antenna
that is part of the ODU unit, or with external antennas connected to the
ODU via N-type connectors. All cables and connections must be connected
correctly to reduce RF losses. The required antenna impedance is 50Ω.
The Integrated Antenna ODU is provided with 370 mm (1.2ft) flat panel
antenna. The radio and the antenna are housed in a weatherproof case as a
single unit.
Figure 1-10: ODU with integrated Flat Panel antenna
External antennas are available for the RADWIN 1000/2000/5000 radios,
varying in operating frequencies, form factor, size and gain, dual or single
polarization.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-10
Antennas Chapter 1
The RADWIN 1000/2000 operating in frequency bands 5.3, 5.4 , 5.8 GHz can
utilize external antennas with RF feeder cables that produce 6 dBi mi-nimal
assembly gain.
The RADWIN 1000 3GHz Band / RADWIN 2000 3GHz Band / RADWIN 5000
3GHz Band operating in the 3.5 and 3.65 GHz can utilize external antennas
with RF feeder cables that produce 13.5 dBi minimal assembly gain.
Flat Panel Antennas
The Flat Panel antenna shown in figure 1-11 below has an integrated or
external configuration:
Integrated or External
1.2ft Flat Panel Dual Polarization
4.9 – 6.0 GHz
Frequency
2.4 – 2.7 GHz (Ext)
2.3 – 2.7 GHz (Int)
3.3 – 3.8 GHz (Int/Ext)
Gain
External
21 dBi at 4.9 – 5.0 GHz
22 dBi at 5.0 – 5.15 GHz
23 dBi at 5.15 – 6.0 GHz
20 dBi at 2.4 – 2.7 GHz
22 dBi at 3.3 – 3.8 GHz
14 dBi at 4.9 – 5.95 GHz
14.5 dBi at 4.9 – 4.95 GHz
15 dBi at 4.95 – 5.15 GHz
15.5 dBi at 5.15 – 5.47 GHz
16.5 dBi at 5.47 – 6.0 GHz
13.5 dBi at 6.0 – 6.06 GHz
Integrated
21 dBi at 4.9 – 5.0 GHz
22 dBi at 5.0 – 5.15 GHz
23.5 dBi at 5.15 – 5.725 GHz
24 dBi at 5.725 – 6.0 GHz
16.2 dBi at 2.3 – 2.4 GHz
17.5 dBi at 2.4 – 2.7 GHz
21 dBi at 3.3 – 3.8 GHz
Size1.2 x 1.2 ft / 371x371 mm
Figure 1-11: Flat Panel Antenna
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-11
RADWIN Manager Chapter 1
Parabolic Dish Antennas
External
2ft Dish Dual Polarization
5.150 - 5.875 GHz
Frequency
4.900 – 5.850 GHz
3.300 – 3.800 GHz
Gain
Diameter2 ft / 620 mm
Beam WidthH,V: 5.6°
28 dBi
25 dBi (3.5/3.65GHz)
Figure 1-12: External Antennas - Parabolic Dish
See the RADWIN products catalog for RADWIN offering of external antennas. External antennas are also available from authorized antenna vendors.
RADWIN Manager
The RADWIN Manager is an SNMP-based management application which
manages a complete link over a single IP address. It can also manage each
side of the link separately.
The RADWIN Manager application facilitates installation and configuration
of the link between the ODU units. The intuitive, easy-to-use RADWIN Manager has a graphical Microsoft Windows interface, and can be run locally
and remotely.
The RADWIN Manager provides:
•Installation Wizard
•On-line monitoring of air interface quality allowing the administrator
to monitor the service and status of each link
•On-line monitoring of equipment alarms and QoS
•Local and remote loopback testing
•Configuration settings
•On-line user manual and help files
•Link Budget Calculator for calculating the expected performance of
the RADWIN 1000/2000/5000 wireless link and the possible service
configurations for a specific link range.
The RADWIN Manager can easily be integrated with any NMS system.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-12
Accessories Chapter 1
Figure 1-13: RADWIN Manager screen
Accessories
RADWIN provides a variety of accessories to support the RADWIN 1000/
2000/5000 system:
•PoE devices
•AC Power Adaptor
•External Lightning Protection Unit
•Cables to connect the various system elements
Documentation set supplied with RADWIN 1000/2000/
5000
The technical documentation supplied with a RADWIN 1000/2000/5000
includes the following items:
•A Quick Start Guide for experienced installers
•A full User Manual - the document which you are reading
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-13
How to Use this Manual Chapter 1
How to Use this Manual
This User Manual is divided into functionally distinct chapters reflecting the
activities required to set up a RADWIN 1000/2000/5000. The division is
shown in the following table:
Chapter/
Appendix
SubjectAudience
2Site Preparation
3Hardware Instal-
lation
4Link Installation:
The RADWIN Manager
5Configuring the
Link
6Site Configuration
7Monitoring and
Diagnostics
ATechnical Specifi-
cations
BWiring Specifica-
tions
Site survey team
Field technician
Installation technician
Installation technician, System manager
Installation technician, System manager
Installation technician, System manager
Installation technician, System manager
Installation technician
CPole and Wall
Installation
DLink Budget Cal-
culator
ELightning Protec-
tion and Ground-
ing Guidelines
GMIB Reference
HExternal Alarms
Specification
ICombo Configura-
tion Tool
A Little Terminology
In the field, a link typically has a local or headquarters site as for example in
figure 1-2 above. Here the service provider is the local or headquarters
site. The service recipient is the remote site.
Installation technician
Installation technician
Field technician
System manager
Installation technician, System manager,
Field technician
Installation technician
Where the link is completely internal to a corporation, the choice of the local
and remote is just a matter of convenience.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-14
A Little Terminology Chapter 1
A
link
then, consists of two
In Broadband Wireless terminology, the local and remote sites are sometimes referred to as “near” and “far”, “HQ” and “remote” and so on.
The site which is closer to the network core (often the local site) will be
referred to as
end user, as
This choice is application-neutral and will be used throughout the manual
both to describe the sites and their names as in the examples.
site A
site B
, and the opposite side of the link, usually closer to the
.
sites
.
The link is configured and managed using a PC, the
connected to site A. (The precise requirements for the managing computer
are set out in chapter 3, Hardware Installation).
RADWIN 1000/2000/5000 supports three connection methods for the managing computer:
•
Local
- a direct peer to peer connection between the Ethernet ports
on the managing computer and the IDU or PoE device. Local connection is always read-write.
•
Network
device belong to a LAN and communicate through a router or hub
•
Over-the-air
air interface
The managing computer may be connected to the link through an IDU or a
PoE device. In what follows, where ever we refer to an IDU it includes PoE
devices unless stated otherwise. Typically, if we need to refer to an IDU as
such, we will use a model name such as IDU-C.
- the managing computer and the site A IDU or PoE
- the managing computer connects to site B via the
managing computer
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-15
Conventions Used in this Manual Chapter 1
Conventions Used in this Manual
Notifications
Notifications consist of Notes, Cautions and Warnings.
The purpose of a Note is to
•Draw your attention to something that may not be obvious or coun-
Note
ter-intuitive
•Emphasize a special feature or peculiarity of the RAD WIN 1000/2000/
5000
•Offer an external reference for additional information
•Add a caveat that would not qualify as a full Caution or Warning (see
below)
•Provide additional background to what follows
•Offer a recommendation
Caution
Warning
•Highlight an indication of something to watch out for
•Advise you if an action has “side effects” i.e. it may disturb something
else that would be best left undisturbed
•Remind you of something that should be kept in mind
A Caution is a notification of risk of damage to equipment or of service
degradation
A Warning is a notification of risk of danger to persons operating near the
equipment
Typographical conventions
General
Where a term is defined or introduced for the first time, it is shown in Boldface. You will have noticed this usage in the Terminology section above.
Software
The RADWIN Manager is a Microsoft Windows application following the user
interface conventions of familiar Microsoft Windows programs.
We would describe the chain of menu commands indicated in the following
screen shot, like this:
Tools|Active Alarms|1 A
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-16
Windows Terminology Chapter 1
using Boldface for the menu labels and vertical bars to separate them.
Similarly, mouse click items will be referred to like this:
“Click Next to continue.”
(A mouse click always uses the left mouse button unless stated otherwise.)
Windows Terminology
Look at figure 1-13 above. The main application display which you see
consists of a frame-window with a menu bar, system icons and content. It
will be referred to as a window, the main window or the Manager window depending on context.
The top line of icons is the tool bar, and provides part of the menu bar
functionality with a mouse click.
At the bottom of the window is the status bar, a line of icons and text
boxes.
The central part of the main window consists of several panes: On the
right, there are Radio Interference, Ethe rnet Service and the Frequency
panes. The left hand pane (with the blue background) is split into three
sub-panes.
If you click Site A or Site B in the tool bar, you will be offered another window, which in turn displays on of sever a l panels depending on which function you choose.
RADWIN 1000/2000/5000 User ManualVersion 2.6.50p1-17
Loading...
+ 68 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.