RADWAG WTC/L series, WTC 3 C1/L, WTC 6 C1/L, WTC 15 C1/L, WTC 30 C1/L User Manual

USER MANUAL

Counting scales – WTC/L series

MANUFACTURER OF ELECTRONIC WEIGHING INSTRUMENTS

RADWAG 26 – 600 Bracka 28 Street, POLAND
Radom, phone [phone], phone/fax [phone],
Sales Department [phone]

www.radwag.com

- 2 -

TABLE OF CONTENT

1. APPLICATION – MAIN FUNCTIONS.........................................................................3

2. KEYBOARD...............................................................................................................3

2.1. Keyboard and display windo w............................................................................3

2.2. Additional markers..............................................................................................4

2.3. Function buttons and functions...........................................................................4

3. OPERATION..............................................................................................................5

3.1. Tarring................................................................................................................5

3.2. Zeroing...............................................................................................................5

4. COUNTING PIECES WITH SAME UNIT MASS........................................................6

4.1. Unit mass is known ............................................................................................6

4.2. By determination of single unit mass..................................................................6

5. SUMMING OF WEIGHING WHILE COUNTING PIECES..........................................7

6. PROGRAM VALUE WHILE COUNTING PIECES .....................................................9

7. READABILITY OF THE SCALE...............................................................................10

8. BACKLIGHT.............................................................................................................10

9. BATTERY CHARGING............................................................................................11

10. TECHNICAL PARAMETERS.................................................................................11

11. COMMUNICATES ON SCALE DISPLAY ..............................................................11

1. APPLICATION – MAIN FUNCTIONS

Scales series WTC /L are designed for counting piec es with same unit mass. Counting
process can be realized as:

 Specification of sample mass (one piece)
 Calculation of sample mass from some determined amount of samples on the

weighing pan

TARE functions allows for determination of net mass of measured loads – tare range
equal to max capacity of the instrument – Max.

Functional possibilities

− Setting alarm function for counting (threshold)

− Change of scale readability

− Totalizing in counting pieces mode

− Counting pieces

2. KEYBOARD

2.1. Keyboard and display window

Fig 1 – buttons and displays

Scales are equipped with three displays: mass, piece mass , quantity of pieces, and
functional keyboard with numeric and function keys.

- 3 -

2.2. Additional markers

Character Description

Zero indication of scale

kg

Stable weighing result
TARE button applied – net indication

Display indicates total quantity of pi eces (sum) or function of
summing details is active

Scale powered from mains
Power supply from battery is low (please charge the battery)

2.3. Function buttons and functions

1.

Confirms quantity of pieces as reference mass

2.

Pressing this button, will cause the display to show in field
WEIGHT, message “total” – display of total sum of
counted pieces

3.

Deleting sum of counted pieces

4.

Confirms mass of single unit mass

5.

Possibility of setting a threshold for counting pieces mode
(after crossing this threshold, scale generates beep
signal)

6.

Deleting the value

7.

TARE button (for determination of net mass)

8.

ZERO button (setting zero point of the scale), switching
on/off scale’s backlight

9.

Summing of following weighing for counting mode or
change of readability of the scale

10.

Decimal point – for insertion of single unit mass value.

11.

Scale adjusting

- 4 -