Radius 350 User Manual

Congratulations on your purchase of the Radius 350 business feature
phone. This business phone has been ergonomically designed to suit
professional office requirements.

This telephone performs all basic functions supported by your service
provider. It works with all analogue PBX switching systems

The caller ID memory and phone book provide a great convenience to
manage your phone calls.

The User Guide describes the installation procedures and features.

User Guide

1

Accessories & Content 2
Installation 2
Wall Mounting 3
Features 3
Function Buttons 5
Main Menu Settings 7
Setting Up 8

- Language 8

- Local Area Code 8

- Date & Time 8

- Recall 9

- LCD Contrast 9

- Pulse/Tone Dialling 9

- Baby Call 10

- Exit Menu 10

- Message Waiting 10
Using the Radius 350 11

- Pre-Dialling 11

- Headset 11

- Volume Control 11

- Speaker Phone 12

- Mute 12

- Redial 12

- Pause 13

Index

2

- Recall 13
One and Two-Touch Memories 13
Caller ID 15

- To Review Calls 15

- To Make Calls From Caller ID 15

- To Delete Caller ID’s 16
Phone Book Memories 16

- to Add Contacts 17

- Search 18

- Edit 18
Automatic Call Timer 19

The following items are included in this package of the Radius 350
Analogue Business Feature Phone :-

- Phone base unit with handset

- 2 x Line cords

- Instruction Guide

- Mains Power Adaptor

1) Insert one end of the curly handset cord into the socket on
the handset and the other end into the socket on the LEFT
hand side of the base unit (next to the telephone cradle).

2) Insert the supplied power adaptor small plug into the power

Accessories & Content

Installation

3

socket on the rear of the base unit. Plug the adaptor into a
mains socket and switch on.

3) Insert the required line cord into the socket marked LINE on
the rear of the base unit.

4) Wall Mounting

- Fit the desk/wall bracket to the 4 slots on the underside of
the telephone, next to the battery compartment, with “wall”
facing upwards.

- Directly beneath the hook switch push down on the latch
and pivot up.

- Drill 2 holes vertically 88mm apart on the wall where you
wish to locate the phone and insert the screws. Tighten the
screws so that the phone slots in place and fits snugly.

- Note – take care not to drill through holes or elctrical cable.

1. Speakerphone

2. Large LCD Display (8.5cm x 4cm)

3. Headset Socket (2.5mm)

4. Desktop or wall Mountable

5. 70 Incoming Caller ID Memories

6. 70 Phone Book Memories

7. 16 Last Dialed Number Memories

8. 8 One Touch Memories and 10 Two Touch Memories

9. 16 Digit Alphanumeric display

10. 32 Digit Memory / Redial

11. FSK/DTMF dual system compatible

12. 12 Language Options

13. Local Area Code Setting

14. Time, Date,Month and Day setting

15. Recall Settings

16. Tone / Pulse setting

17. PABX code setting

18. LCD contrast setting- 5 levels

19. Mute switch

20. Electronic Ringer Hi-Lo-off

Features

4

21. Message Waiting – Line Reversal and 100v

22. Pre Dial Function

23. Call Back Function

24. Total Calls and New Calls Display

25. Pause -3.6 Sec

26. Volume control for Headset / Handset / Speaker – 4 levels

27. Automatic call timer

28. Hearing Aid Compatible

29. 6v Power Adaptor Supplied

30. 2 x3m Line Cords BT & RJ45

31. 3M Extended Handset cord

32. CE & RoHs Compatible

5

Function Buttons

Description

M1 – M8

8 One touch memories (24 Digits maximum).
can store and dial frequently called number.s
Please refer to the user guide section ‘One
touch memories’

SHIFT

Using the SHIFT key up to 10 two touch
memories can be stored into the 10 key pad
buttons 1 – 0

To scroll up/down when browsing selection

To review the dialled numbers. Press this
button then use keys to browse.

DELETE

To Delete an entry or a record in the memory.
Press and hold the button for more than 3
seconds, you can delete all records of the
incoming or outgoing calls.

ENTER

To enter the telephone set up menu. Dial the
numbers in predial mode

(Phone Book)

70 Contact Name and Numbers can be
stored

Function Buttons