Radio Shack Surge Protector User Manual
PROTECTE D WHEN LIT Indica t or — Lights
when the connected devices are protected.
Swift Detection and Protection — Detects and
protects against a power surge of up to 6,000 volts and
42,500 amps in 1 nanosecond (1 billionth of a second).
Power Shutdown Protec tion — Protects the connected appliances from being
damaged by shutting down power when surge protection is depleted (see
“Troubleshooting” on Page 2).
Indication Tags — Identify which
device’s power cord is connected to
which AC socket, so you can avoid
disconnecting the wrong device.
Safety Slide Covers — Prevent children
from inserting metal objects into the
unused AC socket(s).
Power ON Indicator —
Lights when the power is
turned on.
AC Adapter Spacing — Lets you plug
an AC adapter into your surge protector.
POWER — Press to turn the surge protector on.
RESET — See
“Troubleshooting” on
Page 2.
9/1WVNGV"#RRNKCPEG"5WTIG"5VTKR
61-2403
%106'065
Mounting the Surge Protector ..................... 1
Connections ................................................ 1
Operation ............................................. ....... 2
Using the Safety Slide Cover ................... 2
Using the Indication Tags ......................... 2
Troubleshooting .......................................... 2
Care ........................ ........................... ......... 2
Service and Repair ...................................... 2
Specifications ...................... ............... ......... 3
"+/2146#06"
#
If an icon appears at the end of a paragraph,
go to the box on that page with the
corresponding icon for pertinent information.
— Warning # — Important
Rý
.... — Caution
.
"%#76+10"
• This product is intended for indoor use only.
• This surge protector is not a lightning
arrestor and might not protect against
lightning-induced voltage surges.
• Be sure the total wattage of all connected
devices does not exceed 1,875 watts.
• Use the surge protector only with a threeprong standard AC plug. The surge protector
cannot provide protection without a
grounded AC source.
#
±
— Note
.
OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing the RadioShack 7-Outlet Appliance Surge Strip. This strip protects
your valuable app li anc es from da ma ge cau se d by sudden electrical s pi kes an d p ow er surges
up to 788 joules. The surge strip also ensures steady performance of connected devices by
filtering electromagnetic and radio frequency interference.
....
Safety ON
Safety OFF
Operating this surge protector from a nongrounded outlet will invalidate your “Connected
Equipment Guarantee” and puts your valuable
equipment at risk.
Do not use the surge protector with an
aquarium or near wet locations.
"+/2146#06"
#
R
±
• Use appropriate mounting anchors if you are
mounting the surge protector to drywall.
• The appropriate screw size is shown on the
mounting template.
#
"9#40+0)
"016'"±"
ý
R
"
/1706+0)"6*'"
574)'"2416'%614
You can place the surge protec tor on a lev el
surface or mount it on a wall. Select a
location that is:
• near a grounded AC outlet.
• out of the way of normal activities.
1. Use the supplied mounting template to
mark the holes on the selected location.
2. Drive in two wood scre ws (not supp lied)
with heads that fit into the k ey hol e sl ots
on the bottom of the surge protector.
3. Align the surge protector’s keyho le slots
with the wood screws, then press the
surge protector down to secure it.
RadioShack and RadioShack.com are trademarks
#
R
±
2002 RadioShack Corporation.
©
All Rights Reserved.
used by RadioShack Corporation.
%100'%6+105
1. Connect your electronic equipment’s
grounded AC cord plug(s) to the surge
protector’s AC sockets. The adapter
socket is separated b y a wider space so
you can connect your electronic
device’s AC adapter.
2. Plug the surge protector’s AC power
cord into a three-prong standard
grounded AC outlet.
12'4#6+10
POWER
Press
protector.
to turn on the surge
±
protector away from dust and dirt, and wipe
it with a damp cloth occasionally to keep it
looking new.
"016'"±"
±
When you are not using the surge protector,
press POWER so it pops up to turn off the
surge protector. The PROTECTED WHEN LIT,
and ON indicators turn off.
Your connected de vices ar e p rotecte d when
the PROTECTED WHEN LIT and ON
indicators light.
If any of the indicator lights fail, see
“Troubleshooting”.
75+0)"6*'"5#('6;"5.+&'"
%
18'4
Your surge protector is equipped with safety
slide covers on each of its seven AC
sockets. Slide the cover up to protect each
unused AC socket.
75+0)"6*'"+0&+%#6+10"6#)5
Your surge p rotector comes with pairs of
indication tags to identify which device’s
power cord is connected to which AC
socket. Stick a large color tag on the power
cord at the rear of the device and the same
color small tag next to the surge protector’s
target AC socket.
6417$.'5*116+0)
Condition
The PROTECTED WHEN LIT and ON
RESET
indicators turn off, and
pops out.
5'48+%'"#0&"4'2#+4
If your surge pr otecto r is not perform ing a s it
should, take it to your local RadioShack
store for assistance. M od ify ing or tam pe rin g
with the surge protector’s internal
components can cause a malfunction and
might invalidate its warranty.
.
"%#76+10"
Retain Instr uctions— Retain the safety and
operating instructions for future reference.
Damage — Unplug this appliance from the wall
outlet and replace it:
• When the power cord or plug is damaged.
• If liquid has been spilled or objects have
fallen into the appliance.
• If the appliance has been exposed to rain or
water.
• If the appliance has been dropped or
damaged in any way.
• When the PROTECTED WHEN LIT indicator
fails to ligh t.
.
Solution
Your surge protector received a current that
exceeded its capacity due to overload.
When this happens, the 15-amp circuit
breaker (located on the side of the case)
trips to prevent possible damage, and
RESET
pops out. To reset the surge
protector, disconnect one or more of the
connected devices and allow the surge
RESET
protector to cool down. Then push
Condition
The PROTECTED WHEN LIT and ON
indicators turn off, and the surge protector
sounds an alarm.
Solution
Your surge protector's AC line is no longer
protected from surges and power is not
allowed to pass beyo nd the alarm. Whe n the
surge protector recei ves an unusua lly strong
surge, the built-in protection absorbs the
surge to protect your equipme nt. If the surg e
is strong enough, it d iminishes the pr otection
circuitry’s ability and the surge protector
sounds an alarm. If the PROTECTED
WHEN LIT and ON indicators will not light,
replace the surge protector.
....
in.
%#4'
Keep the surge protector dry; if it gets wet,
wipe it dry immediately. Use and store the
surge protector only in normal temperature
environments. Handle the surge protector
carefully; do not drop it. Keep the surge
2
Loading...