Radio Shack 63-1415 User Manual

LIGHT

Vibrating Alarm Cloc

www.radioshack.com

OWNER’S MANUAL — Please read before using this equipment.

™

Ô NOTE Ô

• The default alarm time is set to 12:01. Press SET/ALM to turn off the alarmbefore you s et the time.

• Each time you press any button, the clock beeps.

• While setting the time, if you do not press a key for about 30 seconds, the clock beeps and returns to the current time display.

• The clock uses the 12-hour format. PM appears for a PM hour.

• While setting the alarm time, if you do not press a key for about 30 seconds, the clock beeps and returns to t he current time display

• To turn on or off the alarm, press SET/ALM.

M appears when the alarm is turned on, and

disappears when the alarm is turned off.

Dispose of old batteries promptly and properly. Do not burn or bury them.

M disappears.

WARNING o

MODE

SET/ ALM

UP/ SNZ

START/

Thank you for purchasing a RadioShack Vibrating Alarm Clock. Your clock combines a simpledesign with advanced technology. You canset the clock to beep or vibrate (without disturbing others around you) at the preset time. Its lightweight design lets you carry it anywhere.

Clock Alarm  beeps or vibrates at a time you set.

Snooze Control  temporarily silencesthe alarm.

Backlight  lights the display for about 3 seconds so you can see the time in the dark.

63-1415

About 5 seconds afteryou install the batteries, the clock vibrates and beeps three

12:00 00 and M appear. Ô

times. When the clock stops operating properlyor

the display dims, replace the batteries.

USING THE COVER

Your clock’s cover protects the display and also serves as a stand so you can place the clock on a table or other flat surface. To use the coveras a stand, lift and open the cover all the way.

SETTING THE TIME

1. Press MODE. digits flash. Ô

2. Repeatedlypress (or hold down) to set the hour.

3. Press

4. Repeatedlypress (or hold down)

5. Repeatedlypress

SET/ALM to store the hour. The

minute digits flash.

to set the minute. The second digits automatically return to adjust each minute.

time appears. Ô

appears and the hour

00 when you

MODE untilthe current

UP/SNZ

Timer  lets you count down time from a

preset time less than 24 hours.

 CAUTION 

• Use only fresh batteries of the required size and recommended type.

• Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

• If you do not plan to use the clock for a month or more, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

IMPORTANT

If an icon appears atthe end of a paragraph, go to thebox on tha page with the corresponding icon for pertinent information.

—Warning Ô —Note  —Caution

Clock Cover  protects the display and serves as a stand.

INSTALLING BATTERIES

Your clockrequires two AAA batteries (not supplied) for power. For the best performance and longest battery life, we recommend RadioShack alkalinebatteries.



1. Slide the clock’s battery compartment cover on the back of the clock in the direction of the arrow and remove it.

2. Place two AAA batteries in the compartmentas indicated by thepolarity symbols (+ and –) marked inside.

3. Replace the cover.

SETTING THE ALARM TIME

You can set the clock to soundan alarm to remind you of a daily event (such as a meeting). Ô

1. Press

2. Repeatedlypress (or hold down)

3. Press

4. Repeatedlypress (or hold down)

5. Repeatedlypress

6. To check the alarm time, repeatedly

MODE twice. L and 12:01 or the

last alarm time appear. The hour digits flash.

UP/SNZ

to set the alarm hour.

SET/ALM. The minute digits flash.

UP/SNZ

to set the alarm minute.

MODE untilthe current

time appears.

MODE until L and the set alarm

press time appear.

RadioShack andRadioShack.com are trademarks

All RightsReserved.

used by RadioShack Corporation.

Ô NOTE Ô

• If you set the clock to vibrate at the alarm time, the clock keeps vibrating even when you open the cover during the alarm time.

• Snooze only functions twice in each alarm setting.

• While setting the timer, if you do not press any key within about 30 seconds, the clock beeps once and returns to the current time display.

• If the countdown timer is running, press

START/LIGHT to stop counting then press SET/ALM to reset the timerto

• If the countdown timer is not running and the display is not setto to reset the timer to

• The maximum countdown time you cansetis 23 hours, 59 minutes, 59 seconds.

0:00 00,pressSET/ALM

0:00 00.

Limited One-Year Warranty

This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. In the event of a productdefect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

RadioShack Customer Relations, 200 Taylor Street,6th

Floor, Fort Worth, TX 76102

0:00 00.

12/99

USING THE ALARM

1. Press SET/ALM to turn on the alarm. M appears. Ô

2. To set the clock to vibrate,closethe cover after setting the alarm time.

To set the clockto sound alarm beeps, leave the cover openafter setting the alarm time.

3. Whentheclock reachesthe preset alarm time, it vibrates or beeps intermittently for about 1 minute then automatically turns off. To silence the alarm sooner, press any key.

Ifyoudonotwantthealarmtosoundor vibrate again the next day, press

SET/ALM to

turn off the alarm. M disappears.

USING SNOOZE

1. To silence the alarm and snooze for 4 minutes, press setting the alarm time.

UP/SNZ immediately after

appears.

2. When the preset alarm sounds, press any key to temporarily silence thealarm. After about 4 minutes, the alarm sounds (or vibrates if you have closed thecover) for 1 minute then automatically turns off. To silence the alarm sooner, press any key. Ô

3. To turn off snooze, press

disappears.

UP/SNZ again.

USING THE COUNTDOWN TIMER

The countdown timerlets you set a specific timetocountdownfromupto23hours,59 minutes, 59 seconds.

1. Press

2. Repeatedly press

3. Press or hold down

4. Press

5. Press or hold down

6. Press

7. Press or hold down

8. Press

SET/ALM to turn on the alarm. M

appears.

MODE until TIMER and

0:00 00 appear. The hour digits flash. Ô

UP/SNZ to set the

desired countdown hours.

SET/ALM. The minute digits flash.

UP/SNZ to set the

desired countdown minutes.

SET/ALM. The second digits flash.

UP/SNZ to set the

desired countdown second.

START/LIGHT to startthe

countdowntimer.The display lightsfor 3

seconds,

TIMER flashes and the timer

begins to countdown.

9. To stop the countdown, press

LIGHT

again. When the timerreaches

START/

0:00 00, it soundsanalarmor vibrates for

1 minute.To stop the alarm sooner, press any key. Ô

USING THE CLOCK LIGHT

Press START/LIGHT to light the display for about 3 seconds. To light the display continuously,holddown

START/LIGHT. When

you release it, the light automatically turns off after 3 seconds.

RESETTING THE CLOCK

If the clock displayssegmented digits, does not work properly, or locks up, reset it by using a pointed object,such as a straightened paper clip, to press

RESET on

the back of the clock.

CARE

Keep the clock dry; if it gets wet, wipe it dry immediately. Use and store the clock only in normal temperature environments.Handle the clockcarefully; do not drop it. Keep the clock away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

If your clock is not performing as it s hould, take it to your local RadioShack store for assistance. Modifying or tampering with the clock’s internal componentscan cause a malfunction and might invalidate its warranty.

SPECIFICATIONS

Power Source .......................... Two AAA Batteries

Clock Accuracy ........................± 0.67 Seconds/Day

Current Drain ................................Less Than 6

Operating Temperature..........................32°–104°F

Battery Life ................................... About 13 Hours

(Continuously Vibrating)

Dimensions (Diameter × Depth) ....... 3

Weight (without batteries)................ 1.83 oz (52 g)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

(80 × 25 mm)

µA

(0°–40°C)

/8 ×31/32 in

RadioShack Corporation Fort Worth, Texas 76102

63-1415

11A02

PrintedinChina