Radio Shack 60-8504 User Manual

XMODS

Custom RC

Rubber Tire Upgrade 60-8504

This kit contains four sets of tires – four soft slick, four hard slick, four soft tread, and four hard tread

(16 total). Change your car tires for optimum grip on whatever surface you choose to drive. Before

installing, turn off your vehicle and controller, and detach the car body for easier access.

1. Use the lug wrench in your XMODS

Starter Kit to detach the lug nuts from

the wheels on the car.

2. Remove a wheel and tire. The bearings

might come off; take care not to lose

them.

3. Remove the tire from the wheel and

replace it with a new tire.

Tire

Wheel

Lug Nut

www.xmodsRC.com 1

4. To install the tires, align the flat side of the wheel

with the flat side of the axle and slide the wheel onto

Flat side of axle

the same axle.

5. Screw the lug nut onto the axle and tighten with the

lug wrench.

6. Repeat steps 2-5 for each tire.

Flat side of wheel

Tuning Tip: The car rides differently depending on the tires you select and the surface you drive on.

Soft slick and soft tread tires provide the best grip but wear out quickly. Hard slick and hard tread tires

last the longest but provide less grip and traction.

Printed in China

2 www.xmodsRC.com