Page 1
22-178.fm Page 1 Friday, August 6, 1999 11:38 AM
OWNER’S MANUAL
Please read before using this equipment.
Auto-Ranging LCD
Digital Multimeter
Cat. No. 22-178
Page 2
22-178.fm Page 2 Friday, August 6, 1999 11:38 AM
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
!
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER -SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to the presence of unin sulate d dangerous voltage w ithin the prod uct’s enclosu re
that might be of sufficient magnitude to constitute a risk of
elect ric shock. Do not open t he product’s case.
This symbol is intended to inform you that important operating and m ainte nanc e ins tru ctio ns ar e inc lude d in th e lite ra-
!
ture accompanying this product.
RadioShack is a trademark used by Tandy Corporation.
: TO REDUCE THE RISK OF
©
1996 Tandy Corporation.
All Rights Reserved.
2
Page 3
y
gy
ging
y
g
g
g
22-178.fm Page 3 Friday, August 6, 1999 11:38 AM
FEATURES
Your RadioShack Auto-Ranging LCD Digital Multimeter
is a portable 3
3
/4-digit, compact mul timeter that is ideal
for field, lab, shop, bench, and home applications. Here
are some features t hat make y our new di gital multimeter
a real pro.
Latest IC and Displa
Technolo
— ensures reliabili-
ty, accuracy, stability, and ease of operation.
Auto Power Shut-Off
— helps conserve battery power
by sounding a beep then turning off if you do not change
any settings for 10 minutes.
Auto-Ran
with Manual-Ranging Override
— automatically selects a range when you measure voltages, resistance, or current. You can also manually set the range
when measuring values you know are within a certain
range.
Bar-Graph Displa
— lets you quickly identify nulls,
peaks, and trends.
Hi
h-Speed Samp lin
— updates the bar graph display
12 times each second.
Expanded Current Ran
microampere ranges.
— allow measurements in
es
3
Page 4
22-178.fm Page 4 Friday, August 6, 1999 11:38 AM
Data Hold Function
— holds the display so you can see
the reading even after you disconnect the probes.
Overload and Transient Protection
— helps protect the
meter from overvoltage in most ranges.
Continuity Buzzer Function
— lets you quickly hear if
there is continuity in a cable or between two points.
Diode Check Function
— lets you safely check semi-
conductors for open, shorted, or normal junctions.
Auto-Polarity Operation
— protects your meter and
gives valid measurements even when you connect the
leads in reverse polarity.
Low-Battery Indicat or
— shows when you n eed to re-
place the batteries.
Fold-Out Stand
— lets you adjust the meter’s position
for the best visibility on a flat surface.
Protective Holster
— protects the meter from damage
and lets you hang the meter on a wall.
Your multimeter requires two AA batteries (not
Note:
supplied).
4
Page 5
g
g
g
22-178.fm Page 5 Friday, August 6, 1999 11:38 AM
CONTENTS
A Word About Safety .................................................. 6
Specifications ............................................................. 8
Special Panel Markin
Preparatio n ......................... ......... ......... .......... ......... .. 13
Installing Batteries ................................................ 13
Using Test Leads ............. ......... .......... ......... ......... 14
Using Alligato r Cli p s ................. .......... ......... ......... 15
Using the Stand and Holster ................................ 16
Usin
the Meter ......................................................... 17
Taking Accurate Measurements ......... ......... ......... 18
Automatic Power Off ............................................ 19
Manually Setting the Range ................................. 20
Holding a Measurement ....................................... 20
Using the Bar Graph ............................................. 21
Makin
Maintenance ........ .......... ......... .......... ......... .......... ...... 32
Measurements ............................................. 22
Measuring DC/AC Voltage ................................... 22
Measuring an AC Voltage Riding
on a DC Source Bias ............................................ 24
Measuring Three-Phase AC Voltage ............ 25
Measuring DC/AC Curre nt .......... ................... ...... 26
Measuring Resis ta n c e ................. ......... .......... ...... 28
Checking Continui ty ............... ................... ......... .. 29
Checking Diodes .................................. ....... ....... .. 30
Fuse Replacement ................... .......... ......... ......... 33
s .......................... ......... ......... 12
5
Page 6
22-178.fm Page 6 Friday, August 6, 1999 11:38 AM
A WORD ABOUT SAFETY
We have taken every precaution in designing this m eter
to ensure that it is as safe as we can make it. But, safe
operation depends on you, the operator. We recommend
that you follow these simple safety rules:
• Never apply voltages to the meter that exceed the
limits given in the specifications. Never apply more
than 1000V DC or 750V RMS AC between input
jacks or ground.
• Use extreme caution when working with voltages
above 100V. Always disconnect power from the ci rcuit you are measuring before you connect test leads
to high-volt age poi nts.
• Never connect to a source of voltage when you
select diode check, res istance measurement, continuity, or one of the current measurement functions.
• Always discharge filter capacitors in the power supply of the circuit under test before you attach test
leads.
• Always turn off power and disconnect the test leads
before you replace the batteries or fuse.
• Never operate the mete r unless the back cover i s in
place and fully closed.
6
Page 7
22-178.fm Page 7 Friday, August 6, 1999 11:38 AM
• Because many AC/DC sets have a potentially hot
chassis, be sure the t op of your workbench and the
floor underneath it are made of non-conductive materials.
• The multimeter is fully calibrated and tested. Under
normal use, no furthe r adjustment should be necessary. If the meter requires repair, do not try to adjust it
yourself. Take it to your nearest RadioShack store.
Service by unauthorized personnel voids the warranty.
WARNING:
USE EXTREME CAUTION IN USE OF THIS
DEVICE. IMPROPER USE OF THIS DEVICE CAN RESULT IN INJURY OR DEATH. FOLLOW ALL SAFEGUARDS SUGGESTED IN THIS OWNER’S MANUAL IN
ADDITION TO NORMAL SAFETY PRECAUTIONS IN
DEALING WITH ELECTRICAL CIRCUITS. DO NOT
USE THIS DEVICE IF YOU ARE UNFAMILIAR WITH
ELECTRICAL CIRCUITS AND TESTING PROCEDURES. NOT FOR COMMERCIAL OR INDUSTRIAL
USE.
7
Page 8
22-178.fm Page 8 Friday, August 6, 1999 11:38 AM
SPECIFICATIONS
Display.................................... LCD 33/4-dig its maximu m,
3200 count resolution
Bar Graph................................................... 33 segments
(100 counts of resolution/segment
sampled 12 times/second)
RANGES AND ACCURACY
DC Volts
300 mV–3 V ........................................ ±0.5% of reading,
0.2% of full scale, ±1 in last digit
±
30–300 V .............................................
0.2% of full scale, ±1 in last digit
±
1000 V .................................................
0.2% of full scale, ±1 in last digit
±
1.0% of reading,
±
1.0% of reading,
±
(Maximum Measurement: 1000 Volts)
AC Volts
3–30–300 V . ........................................ ±1.2% of reading,
0.5% of full scale, ±1 in last digit
±
750 V ...................................................
0.5% of full scale, ±1 in last digit
±
(Maximum Measurement: 750 Volts RMS)
8
1.2% of reading,
±
Page 9
22-178.fm Page 9 Friday, August 6, 1999 11:38 AM
DC Current
300 mA/30 mA .................................... ±1.0% of reading,
0.2% of full scale, ±1 in last digit
±
3000
20 A ........ .......... ......... .......... ......... ......
A/300 mA
m
..................................... ±
0.2% of full scale, ±1 in last digit
±
0.2% of full scale, ±2 in last digit
±
1.5% of reading,
4.0% of reading,
±
(Maximum Measurement: 20 A)
Measurement must be done within 30 seconds after 20 A
input.
AC Current
300–3000 mA–30–300 mA .................. ±2.0% of reading,
0.5% of full scale, ±1 in last digit
±
(Maximum Measurement: 300 mA)
20 A ........ .......... ......... .......... ......... ......
0.5% of full scale, ±2 in last digit
±
Measurement must be done within 30 seconds after 20 A
input.
4.0% of reading,
±
9
Page 10
22-178 .fm Page 10 Friday, August 6, 1999 11:38 AM
Resistance
300 ohms–3–30–300 kohms ............... ±1.0% of reading,
0.2% of full scale, ±1 in last digit
±
3 M ohms ............................................
0.2% of full scale, ±1 in last digit
±
30 M ohms
..................................................±
0.5% of full scale, ±1 in last digit
±
2.0% of reading,
±
3.5% of reading,
Range .........Full auto-range or manual-range control for
voltage and resistance measurements. Semi-auto and
manual range for current measurements.
Polarity ..................... A utomatic, Minus sign for negative
polarity
Input Impedance .......................1 0 Megoh m (DCV/ACV),
More than 100 Megohm on 300 mV DC
Continuity Function ................. Continuity buzzer sounds
at less than about 20 ohms
Low Battery Indicator . .................. appears when
battery voltage drops below operating voltage
10
Page 11
22-178 .fm Page 11 Friday, August 6, 1999 11:38 AM
Overrange Indication
....... ......OL.
(overload)
appears on the displ ay to in dicate that t he measurem ent
exceeds the absolute maximum reading. Use care in
DC1000V, AC 750 V, and DC/AC 20 A ranges, as
exceeding the maximum limits of these ranges can damage the meter and prevent an overrange indication.
Operating Temperature ................................. 3 2 to 122×F
(0 to 50×C)
Storage Te mpe r ature .................................... – 4 to 140×F
(–20 to 60×C)
Power Source ...................................... Two AA batteries
Power Consumption ............................... 5 mW (Typical)
Dimensions (WHD).....................3
1
/16 × 61/2 × 13/8 Inches
(78 × 165 × 35 mm)
Weight ..................................................... 12.3 oz (348 g)
Included Accessories..... Safety test lead with attachable
alligator clip, holster, fuse (0.5A/250V)
11
Page 12
22-178 .fm Page 12 Friday, August 6, 1999 11:38 AM
SPECIAL PANEL MARKINGS
For your safety, we have added special ma rkings to the
panel to remind you of the measurement limitations.
20 A
MAX
1KV
!
MAX
1000V
~750V
The maximum current that you can measure at this terminal is 20 amps.
To avoid electrical shock or instrument
damage, do not connec t the com m on inpu t
terminal (
than 1000 Volts with respect to earth/
ground.
Refer to complete operating instructions.
The maximum voltage t hat this meter can
measure is 1000V DC or 750V AC.
Be extra careful when making high-voltage
measurements; DO NOT TOUCH TERMINALS OR PROBE ENDS.
jack) to any source of more
COM
12
Page 13
22-178 .fm Page 13 Friday, August 6, 1999 11:38 AM
PREPARATION
INSTALLING BA TTERIES
Your meter requires two AA b atteries for power. We recommend alkaline batteries, such as RadioShack Cat. No.
23-557.
1. Turn off the power and disconnect the test leads.
2. Remove the meter from the holster.
(illustration
of removal
from holster)
3. Use a Ph illips screwdriv er to remove the s crew that
secures the back cover, then lift off the cover.
(illustration)
4. Install the batteries as indicat ed by the polarity symbols (+ and –) marked in the battery compartment.
5. Replace the cover and secure it with the screw.
13
Page 14
22-178 .fm Page 14 Friday, August 6, 1999 11:38 AM
6. Replace the meter in the holster.
When appears on the right side of the display, replace the batteries.
Warnings:
• To av oid electrical shock , disconnect both test leads
from any equipment before you remove the batteries.
• Do not operate the meter until you replace the batteries and close the back cover.
Caution:
Never leave weak or dead batteries in the
meter. Even leak-proof types can leak and d amage the
meter.
When you are not going to use the meter for a few
weeks, remove the batteries.
USING TEST LEADS
Use only the same type of test leads supplied with the
meter. These test leads are rated for 1200 volts. You can
order replacement leads from your local RadioShack
store.
14
Page 15
22-178 .fm Page 15 Friday, August 6, 1999 11:38 AM
Caution:
Although these test leads are rated for 1200
volts, the maximum rating of this meter is 1000 volts DC/
750 volts RMS AC. Do not try to measure any voltage
greater than 1000 volts DC/750 volts RMS AC.
USING ALLIGATOR CLIPS
Alligator clips are supplied to allow you to keep your
hands free while making measurements. To attach the alligator clips to the test leads, screw the red clip to the red
test lead’s tip and the black clip to the black test lead’s
tip.
(illustration)
15
Page 16
22-178 .fm Page 16 Friday, August 6, 1999 11:38 AM
USING THE STAND AND HOLSTER
The fold-out stand lets you p lace the met er upright on a
flat surface for easier viewing.
(illus of meter
w/stan d an d
hangin g)
The holster lets you hang the meter on a wa ll, hold the
test leads, and protect the meter from damage if you drop
it.
16
Page 17
22-178 .fm Page 17 Friday, August 6, 1999 11:38 AM
USING THE METER
Before you use the meter the first time to make a measurement, follow these steps to confirm correct operation
and to familiarize yourself with the meter’s operation.
(illus showing
all controls)
1. Press
POWER
to turn on the meter. All the display
elements briefly appear.
2. Set the selector to
3. Press
RANGE
to set the meter to the manual rang e
selection mode.
play. Press
RANGE
each time you p ress
.
V
(Range Hold) appears on the dis-
RH
again. The decimal point shifts
RANGE
. See “Manually Setting
the Range” on Page 20.
4. Use the selector to switch between the meter ’s functions and familiarize yourself with the displays.
17
Page 18
22-178 .fm Page 18 Friday, August 6, 1999 11:38 AM
Notes:
• See the unit of measure on the display to distinguish
the range. For example, the me ter displays
300 mV range and
the position of the decimal. For example, if the display shows
than 1 volt. If the display shows
set to measure up to 1000 volts.
• The display might show a phantom reading in some
DC and AC voltage ranges when the test leads are
not connected to a circuit. This is normal. The high
input sensitivity produces a wandering effect. When
you connect the test lea ds to a circuit, a real measurement appears.
.000V
in the 300 V range. Also, note
V
, the meter is set to measure less
, the mete r is
000V
mV
in the
TAKING ACCURATE
MEASUREMENTS
For the most accurate reading, the temperature should
be between 65×F an d 83×F (18×C and 28×C) (80% relative humidity maximum).
18
Page 19
22-178 .fm Page 19 Friday, August 6, 1999 11:38 AM
Connect the red lead to the
and the black lead to the
COM
V•W• •mA•mA•
terminal. All connections
terminal
except 20 A measurements are made at these terminals.
Caution:
When
(overload) appears on the display,
OL.
the value you are mea suring exceeds the meter’s max imum range. This is a normal display when you measure
resistance and do not have the leads connected to a
component. If you are measuring volt age or current, immediately disconnect the probes from the circuit.
AUTOMATIC POWER OFF
Your meter conserves power by sounding a warning tone
and automatically turning off ab out 10 minutes after the
last time you changed settings (even if you are makin g
measurements). To turn the meter back on, press
RANGE
or
DATA-H
.
(illustration)
19
Page 20
22-178 .fm Page 20 Friday, August 6, 1999 11:38 AM
MANUALLY SETTING THE RANGE
When you measure voltages or resistance, your meter
can automatically select a measuring range. When you
measure current, the meter automatically selects a range
within the limits of th e select or’s setting. While this feature is convenient, it might be faster to manually set the
range when measuring values that you know are within a
certain range.
To switch to manual-range control, press
(Range Hold) appears on the display and the meter holds
the range at its current set ting. Repeat edl y pres s
to change the measuring range.
To set the meter back to auto-range control, press and
RANGE
hold
display and the meter automatically selects the range
that gives the best reading.
for about 1 second. RH disappears from the
RANGE
RANGE
.
RH
HOLDING A MEASUREMENT
DATA-H
Press
display.
value stays on the display even if you remove t he probes
from the circuit, but the range controls do not work.
20
(data hold) to hold all indications on the
appears on the display and the measured
DH
Page 21
p
22-178 .fm Page 21 Friday, August 6, 1999 11:38 AM
To cancel data hold, press
DA TA-H
again or move the se-
lector.
USING THE BAR GRAPH
The meter also indicates all the measurements on the
bar graph at the bottom of the display. The bar graph’s
length increases and decreases with the measured v alue. You can easily observe changes in measurements by
watching the bar graph.
Exam
the display shows:
: If the meter measures 12V in the 30 0V range,
le
(illustration)
21
Page 22
22-178 .fm Page 22 Friday, August 6, 1999 11:38 AM
MAKING MEASUREMENTS
MEASURING DC/AC VOLTAGE
Caution:
ment is 1000V DC and 750V AC (RMS). If you try to measure a DC voltage above 1000 volts or an AC voltage
above 750 volts RMS, you can damage your meter.
When you connect the meter to a voltage high er than the
maximum rating, all the digits on the d isplay blink. Disconnect the probes immediately.
Follow these steps to measure DC or AC voltage.
1. Set the selector to
2. Plug the red test lead into the
3. Connect the probes to the circuit you want to test.
The maximum inpu t limit for voltage measure-
for DC voltages or ~V for AC
V
voltages.
When you measure DC voltages, appears on the
display. When you me asure AC voltages,
on the display.
V
•W• •mA•mA•
and the black test lead into the
When you measure DC voltages, the minus sign
appears if you connected t he black lead t o a point in
the circuit that has a higher voltage potential than
where you connected the red lead.
COM
jack.
appears
~
jack
22
Page 23
22-178 .fm Page 23 Friday, August 6, 1999 11:38 AM
When you use the meter to probe for a voltage
Hint:
in a high-voltage circuit, we recom mend you do not
try to position both prob es at o nce. Instead, use on e
of the supp lied insula ted alligator clips to clamp one
lead to the circuit’s neutral or ground lea d (usually a
bare, green, or white lead in AC wiring circuits). Then
probe for voltages with the other probe. This helps
prevent you from accidentally touching a hot wire,
since you need only concentrate on one test probe.
Warning:
Never clamp onto a hot wire (usually red,
black, or blue in A C wiring ci rcuits). If you do so an d
then touch the other probe connected to the meter,
you could receive an electric shock.
4. The meter automatically moves to the range that
gives the best reading. If you s elected manual rang e
control, pres s
RANGE
to change the range.
23
Page 24
22-178 .fm Page 24 Friday, August 6, 1999 11:38 AM
MEASURING AN AC VOLTAGE
RIDING ON A DC SOURCE BIAS
(illustration)
To measure an AC voltage superimposed on a DC voltage source bias, you must first measure the DC and AC
voltages separately, then compute t he peak voltage using the formula:
Peak voltage = DC voltage + ——————
1. To measure the DC voltage, set the selector to .
The display shows the DC voltage.
2. To measure the AC voltage, set the selector to .
The display shows the AC voltage.
Caution:
peak with respect to earth/ground.
24
Never try to measure any circuit over 1000 V
AC voltage
.707
Page 25
g
22-178 .fm Page 25 Friday, August 6, 1999 11:38 AM
Measuring Three-Phase AC Voltage
We designed this meter primarily to measure household
AC voltages. It is not intended for com m ercial or indust rial use. Please note the following about 3-phas e, line-toline voltages.
Warnin
s:
• Because o f the dangers in herent in m eas uri ng three-
phase circuits, do not use this meter for such applications. The actual voltage can b e greater th an the circuit’s rated line-to-ground voltage.
• To determine the line-to-line voltage, multiply the
rated line-to-ground voltage by 1.732 (the square
root of 3).
For example, if the rated line-to-ground voltage is
640 volts, the line-to-line voltage is 640 × 1.732
=1108 Vol ts AC.
This voltage exceeds the meter’s rating and you
should not connect the meter to this circuit.
25
Page 26
22-178 .fm Page 26 Friday, August 6, 1999 11:38 AM
MEASURING DC/AC CURRENT
To measure current, you must brea k the circuit a nd connect the leads to two circuit connect ion points. The c onnection must be in series with the circuit under test. Use
the supplied alligator clips for this connection. The maximum input limit for DC/AC current measurement is 20 A.
Warning:
Measuring high current (in the DC/AC 20 A
range) can cause the m et er’s i ntern al com pon ent s to become dangerously hot. Make measurements within 30
seconds after 20 A input and a llow the meter to cool for
15 minutes between such measurements.
1. Set the selector to
320/3200 µA, 32/320 mA
, or
20 A
.
Cautions:
• If you do not know the amount of current in the circuit you are measuring, always set the select or to
20 A
and connect the red test lead to the
20 A
jack.
• NEVER CONNECT THE TEST LEADS ACROSS
A VOLTAGE SOURCE while the selector is set to
a current-measuring position. Doi ng so blows the
fuse in the meter or damages the circuit under test.
2. Press so
appears on the display if you
~
are measuring AC current, or appears if you are
measuring DC current.
26
Page 27
22-178 .fm Page 27 Friday, August 6, 1999 11:38 AM
3. Plug the black test lead into the
jack and the red
COM
test lead into the appropriate jack.
4. Remove power from the circuit under test and discharge all capacitors.
5. Break the circuit at the appropriate point.
6. Connect the probes in series with the circuit.
7. Apply power and read the current.
If the measured current’s polarity is negative, a minus
sign appears before the value.
If you are using the 20A jack and setting, and the
measurement is less than 320 mA, remove power
from the circuit, move the red test lead to the
V•W• •mA•mA•
jack, set the selector to
32/320 mA
and apply power to the circuit.
If you are using the 32/ 320 mA jack an d setting, an d
the measurement is le ss than 3.2 mA, mo ve the red
test lead to the
tor to
320/3200 mA
If the meter does not show a rea ding, check
Note:
V•W• •mA•mA•
, and apply power to the circuit.
jack, set the selec-
the fuses (see “Fuse Replacement” on Page 33).
,
27
Page 28
22-178 .fm Page 28 Friday, August 6, 1999 11:38 AM
MEASURING RESISTANCE
The resistance-measuring circuit compares the voltage
gained through a known resistance (internal) with the
voltage developed across an unknown resistance.
1. Remove all power from the circuit under test and discharge all capacitors.
2. Set the selector to
Caution:
NEVER CONNECT THE PROBES TO A
W
.
SOURCE OF VOLTAGE while the selector is set to
.
W
Note:
With no resistance connected across the test
OL.
leads (resistance infinite),
the display when you set the sel ector to
(overload) appears on
. This is
W
normal.
3. Plug the red test lead into the
and the black lead into the
COM
V
•W• •mA•mA•
jack.
jack
4. Connect the probes across the circuit or compone nt
you want to measure.
5. The meter automatically moves to the proper range.
If you select manual range control, press
RANGE
change the range.
28
to
Page 29
22-178 .fm Page 29 Friday, August 6, 1999 11:38 AM
Caution:
The meter has a circuit to protect the resistance
range from over-voltage (450 volts RMS AC, 1 minute).
However, to prevent accidentally exceeding the protection circuit’s rating and to ensure a correct measurement,
NEVER CONNECT THE PROBES TO A SOURCE OF
VOLTAGE when you set the selector to
W
.
Notes:
• When you short the test leads, the meter displays a
small value (less than 0.7 ohms). This is due to the
meter’s and tes t lead’s internal resist ance. You might
need to take note of this value and subt ract it from
the measured value when you m easure a very small
resistance.
• For resistance of about 1 megohm and above, the
display might take a f ew sec onds to stab ilize. Th is is
normal for high-resistance readings.
CHECKING CONTINUITY
This measurement helps you check electrical circuits,
such as house wiring or a speaker cable, for short or
open circuits.
1. Set the selector to . The range automatically
sets to 320 ohms.
29
Page 30
22-178 .fm Page 30 Friday, August 6, 1999 11:38 AM
2. Press so appears on the display.
Caution:
NEVER CONNECT THE PROBES TO A
SOURCE OF VOLTAGE while the selector is set to
.
3. Plug the red test lead into the
and the black test lead into the
V
•W• •mA•mA•
COM
jack.
jack
4. Connect the probes to the circuit you want to check.
5. If the circuit resistance is less than about 20 ohms,
the buzzer sounds, indicating there is a short. The
display shows the actual circuit resistance.
CHECKING DIODES
This measurement lets you check diodes, transistors,
and other semiconductors for opens, shorts, and normal
operation.
1. Set the selector to .
2. Press so appears on the display. The
meter automatically sets the range to 3 V.
Caution:
A SOURCE OF VOLTAGE when you set the selector
to .
NEVER CONNECT THE TEST LEADS TO
30
Page 31
22-178 .fm Page 31 Friday, August 6, 1999 11:38 AM
3. Plug the red test lead into the
and the black lead into the
COM
V•W• •mA•mA•
jack.
jack
4. Remove power from the circuit under test and discharge all capacitors.
5. Connect the probes to t he sem iconduc t or device yo u
want to check and note the meter reading.
6. Reverse the probes and note the second reading.
7. Judge the semiconductor device as follows:
If one reading shows some value and the other is
, the device is good.
OL.
If both values are
, the device is open.
OL.
If both values are very small or zero, the device is
shorted.
The value indicated on the display during the diode
Note:
check is the forward voltage.
(illustrations)
31
Page 32
22-178 .fm Page 32 Friday, August 6, 1999 11:38 AM
MAINTENANCE
Your RadioShack Auto-Ranging LCD Digital Multimeter
is an example of supe rior des ign and craft smanshi p. The
following suggestions will help you care for the meter so
that you can enjoy it for years.
• Keep the meter dry. If it gets wet, wipe it dry immediately. Liquids can contain mine rals that can corrode
the electronic circuits.
• Use and store the meter only in normal temperature
environments. Temperature extremes can shorten
the life of electronic devices and distort or melt plastic
parts.
• Handle the meter gently and carefully. Dropping it
can damage the circuit boards and case and can
cause the meter to work improperly.
• Wipe the meter with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean the
meter.
• Use only fresh batteries of the required size and type.
Always remove old or weak bat teries. They can leak
chemicals that destroy electronic circuits.
32
Page 33
22-178 .fm Page 33 Friday, August 6, 1999 11:38 AM
Modifying or tampering with your m eter’s internal com ponents can cause a malfunction and might invalidate th e
meter’s warranty. If your meter is not performing as it
should, take it to your local RadioShack store for assistance.
FUSE REPLACEMENT
WARNING:
TO AVOID ELECTRIC SHOCK, DISCONNECT THE TEST PROBES BEFORE REMOVING THE
BATTERIES OR FUSES. REPLACE ONLY WITH THE
SAME TYPE OF BATTERIES OR FUSE. THIS INSTRUMENT CONTAINS NO OTHER USER SERVICEABLE
PARTS. SERVICE SHOULD BE PERFORMED ONLY
BY QUALIFIED PERSONNEL .
CAUTION:
the fuse on the
For continued protection ag ainst fire, repl ace
V
•W• •mA•mA•
terminal with a 0.5 A,
250 V fuse (Cat. No. 270 -1047) and replace the fuse o n
the 20 A terminal with a 20 A, 250 V fuse (Cat. No. 270-
1041).
Note:
The fuse on your digital multimeter’s
V
•W• •mA•mA•
terminal is a special size an d type . We
have included one s pare fuse in your meter, located in
the lower part of the battery/fuse compartment.
33
Page 34
22-178 .fm Page 34 Friday, August 6, 1999 11:38 AM
Follow these steps to replace any blown fuse.
1. Turn off the power and disconnect the test leads.
2. Remove the screw securing the back case and lift off
the back cover.
3. Remove the blown fuse.
4. Replace the fuse with the spare fuse or a new fuse of
the same rating.
5. Replace the back cover and secure it with the screw.
WARNING:
DO NOT OPERATE YOUR METER UNTIL
THE BATTERY/FUSE COVER IS IN PLACE AND FULLY CLOSED.
(illustration)
34
Page 35
22-178 .fm Page 35 Friday, August 6, 1999 11:38 AM
NOTES
35
Page 36
22-178 .fm Page 36 Friday, August 6, 1999 11:38 AM
RadioShack Limited Warranty
This product is warranted against defects for 90 days from date of purchase from RadioShack company-owned stores and authorized
RadioShack fr a nc hi se es and de al ers . Wi t h in this period, w e w i ll r e pa ir
it without charge for parts and labor. Simply
sales slip
ranty does not cover transportation costs. Nor does it cover a product
subjected to misuse or accide ntal damag e.
EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES ARE
LIMITED IN DURATION TO THE DURATION OF THE W RITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states do not permit limitation or exclusion of implied warranties; therefore, the
aforesaid limitation(s) or exclusio n(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
as proof of purchase date to any RadioShack store. War-
We Service What We Sell
bring your RadioShack
10/95
8A6 Printed in Korea
RadioShack
A Division of Tan dy Corpo ration
Fort Worth, Texas 76102
Loading...