Radio Shack 20-404 User Manual

1 Install batteries

2 Install antenna

2

Quick Start 20-404/PRO-404

Handheld Radio Scanner

Start Here

See the User’s Guide for complete instructions.

Package contents

Scanner Antenna

Rechargeable
batteries

Alkaline
batteries

3 Find and store frequencies

1. Press , , , , or . The service search starts in two seconds.

2. Press ENT when you find an interesting frequency (not applicable for

marine or weather service banks). The bank number and

3. If you want to change storage banks, enter the new bank number.

4. Press ENT to store the frequency. The channel and frequency flash twice.

To cancel the operation, press TUNE/CLEAR.

St or E

appear.

3

1

Rechargeable
Battery Holder

User’s

Guide

©2009. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.

Alkaline
Battery Holder

Quick Start

Belt Clip

Program known frequencies

Refer to www.radioreference.com for a list of frequencies in your area.

1. Press PGM.

2. Use the number keys and • to enter the frequency.

3. Press ENT to store the frequency into the channel.

4. Press SCAN to begin scanning stored/programmed frequencies.

PG M

appears. Enter the channel number (1–200) where you

want to store a frequency, then press PGM again.

PGM

(Program)

02A09
Printed

in China

ENT

(Enter)

GE-09D-0560

20-404/PRO-404