Page 1
1201800
User’s Guide
RadioShack
Bluetooth® Music Transmitter
Page 2
2
We hope you enjoy your RadioShack Bluetooth® Music
Transmitter. This transmitter adds Bluetooth wireless
technology to your device allowing for wireless streaming
to your speakers/headphones. Please read this user's guide
before using your transmitter.
Package Contents
• RadioShack Bluetooth® Music Transmitter
• AC Adapter
• 6ft (1.82m) ⅛" (3.5mm) Stereo Audio Cable
• 6ft (1.82m) Stereo RCA Cable
• User’s Guide
Page 3
3
Setup
1. Connect your device using one of these three options:
• Using RCA cable (included): Connect the ⅛"
(3.5mm) plug into the AUX IN jack on the transmitter,
then the RCA plugs into the AUX OUT jacks on your
device.
OR
• Using ⅛" (3.5mm) audio cable (included): Connect
one end to the AUX IN jack on the transmitter and
the other end into the ⅛" (3.5mm) phone jack on your
device.
OR
• Using a TOSLINK cable (not included): Connect
one end to the OPTICAL IN jack on the transmitter,
then the other end into the OPTICAL OUT jack on
your device.
Note: If both OPTICAL IN and AUX IN devices are
connected at the same time, the AUX IN device takes
priority. Disconnect the AUX IN connection to use
OPTICAL IN device.
2. Connect the adapter into the DC IN jack on the
transmitter then plug the adapter into a wall outlet.
Page 4
4
M
A-B
OR OR
DIGITAL
OPTICAL
OUT
AUX OUT
R L
3.5mm
PHONE JACK
ANALOG
Device without Bluetooth wireless technology
Stereo RCA
Cable (included)
Stereo Audio
Cable (included)
TOSLINK Cable
(not included)
Page 5
5
Pairing
1. Press and hold the connect button to turn on the
transmitter. The LED indicator ashes blue.
2. Activate the Bluetooth function and enter pairing mode
on your wireless headphones/speaker with Bluetooth
wireless technology (see speaker/headphones user's
guide for details).
3. If no device is connected (LED ashes blue):
Press the connect button once on the transmitter
to enter pairing mode. The LED ashes blue and red
alternatively as the transmitter searches for a device
and lights blue steadily once successfully.
LED Indicator
• Flashes blue - Standby
• Flashes blue and red
alternatively - pairing mode
• Lights blue steadily - paired
Connect Button
• Press and hold to turn on/o
• If no previously paired device is in range, press once to
enter pairing mode
• When a previously paired device reconnects, press once
to activate sound output
• Press twice when Bluetooth is connected to disconnect
a currently paired device. Press again to enter pairing
mode.
Page 6
6
If already paired to a device (LED lights blue):
Press the connect button twice to disconnect the paired
device. LED indicator ashes blue. Press the connect
button again to enter pairing mode. The LED ashes
blue and red alternatively, then lights blue steadily once
successfully paired to a new device.
4. To turn o the transmitter, press and hold the connect
button.
Notes:
• If your Bluetooth-enable device was previously paired with
the transmitter, they will reconnect automatically once
both are turned on. Press the connect button once to
activate sound output.
• If the Bluetooth-enabled device does not reconnect with
the transmittter, restart the transmitter and pair your
device again.
Specifications
Power ................................................................................ 5V DC 300mA
Bluetooth Protocol ..................................................V3.0 + EDR A2DP
Operation Range ................................................................ 33 ft. (10m)
Specifications are subject to change and improvement
without notice. Actual product may vary from the images
found in this document.
FCC Information
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
Page 7
7
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the
environment by restricting specic
hazardous materials and products.
01A17
1201800
Printed
in China
© 2017 General Wireless Operations Inc.
All rights reserved. RadioShack is a registered
trademark used by General Wireless
Operations Inc. dba RadioShack.
radioshack.com
The Bluetooth® word mark and logos are owned by Bluetooth SIG,
Inc. and any use of such marks by General Wireless Operations
Inc. is under license.
determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult your local dealer or an experienced radio/TV technician for
help.
If you cannot eliminate the interference, the FCC requires that you stop
using your equipment. Changes or modications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Limited Warranty
Go to www.radioshack.com/help for details.
RadioShack Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
Loading...