RADIOLAND TECHNOLOGY CC2640S1 User Manual

CC2640S1

 RF Receive Sensitivity: -96 dBm

 Size: 11.8mm x 15.8mm

 Operating Voltage: 1.8V to 3.8V

 Operating Temperature: -40 to +85C



 7.4 mA Receive Mode

 1μA Standby (SRAM/CPU retention and

 200nA Shutdown

 61μA/MHz Active CPU Current

 Drivers, Bluetooth Low Energy

 Controller, and bootloader in ROM

 Flexible peripheral set

 On board 32 kHZ and 24 MHz Crystals

 Worldwide Acceptance:

 Consumer electronics

 Mobile phone accessories

 Sports & Fitness equipment

 HID applications

 Home and Building Automation, Lighting

 Control, Alarm and Security

 Electronic Shelf Labeling, Proximity

 Tags

Overview

Radioland would like to announce a low-cost and low-power consumption module which has all of
the Bluetooth Smart 4.1 functionalities. The CC2640S1 module fully supports the single mode
Bluetooth Low Energy operation, and the output power can support class 2. The module provides
the ability to either put your entire application into the integrated ARM Cortex M3 microcontroller,
or use the module in Network Processor mode in conjunction with the microcontroller of your choice.
RF Core’s dedicated ARM Cortex M0 improves system performance and frees up FLASH memory
for custom applications.

Feature

 Built in CC2650F128 Bluetooth Smart
 (BLE 4.1) System-On-Chip (SOC)
 128 kB Flash / 20 kB SRAM

8.4 mA Transmit Mode

RTC running) with quick 100 μs start up

Applications

5F.BlockA2 | Hangcheng Industry Zone | ChenTian | Xixiang Town | Bao’an district | Shenzhen,P.R.C
Tel:[phone] | www.radioland-china.com | [e-mail]

Electrical Characteristics

ITEM TEST REQUIREMENT REMARKS

Voltage supply 1.8－3.8V DC

Center frequency

Frequency error ±50KHz

Modulation O-QPSK

Receiving sensitivity -97dBm High gain Mode

Receiving current 5.9mA

Transmitting current 9.1mA TX Power 5dBm

Sleep consumption At
power mode2
Sleep consumption At
power mode3

Transmit distance >60M BER<0.1%

Antenna 50ohm

Module size 11.8mm*15.8mm

2402－2480MHz

1uA Sleep Timer ON

0.1uA External interrupts

Programmable

RECOMMENDED OPERATING CONDITIONS

MIN MAX UNIT
Operating ambient temperature range, TA -30 85 °C
Operating supply voltage 1.8 3.8 V

CAUTION:

ESD sensitive device. Precautions should be used when handing the device in order to prevent
permanent damage.

5F.BlockA2 | Hangcheng Industry Zone | ChenTian | Xixiang Town | Bao’an district | Shenzhen,P.R.C
Tel:[phone] | www.radioland-china.com | [e-mail]