Radioddity iRaddy GM Series, iRaddy GM-4, iRaddy GM-5, iRaddy GM-6 User Manual

iRaddy GM-4/5/6

User Manual

Camera hole

s

e

For mobile phone camera
photography

Speaker

For making sounds

PPT key

For transmitting signals

Power button

For on/off

USB port

For charging the battery / serving as power bank to charge the phone / reading and writing talkback frequency information

Function symbol description

The LCD display symbols of this unit are as follows:

LCD screen

For displaying the working statu
of the current machine

Function button

For operating various settings of th
machine

Microphone

For inputting sound signals

L indicates that the transmission is in low power.
H indicates that the emission is in high power.
S indicates that the power save switch is ON.

QT indicates that there is currently an analog sub audio.
DQT indicates that there is currently a digital sub audio.

indicates that the unit is currently being used as a power bank..

Power bank function and charging operation instructions

This machine has a built-in battery and can serve as a powder ba nk. When you need to charge the mobile phone, you can use the dedicated USB

charging cable to connect the USB port of the machine a nd the USB port of the mobile phone to realize the charging function. At this time, the “ ”
symbol will appear on t he screen of t he mobile phone; when the machine is out of power, us e USB cable to connect 5V to the USB port of the unit to
charge the ba ttery.

Basic operation
Power on/off

Press and hold the “ ” key until you hear the “didu” sound and t he screen lights up, indicating that the power of the interphone is turned on; in the

power-on state, press and hold the “ ” key until you hear the “didu” sound and the screen goes out, indicating that the power of the interphone is
turned off;

Call

While holding a call, hold the [PTT] key and speak into the microphone with normal tone. Keep the distance between the microphone and t he lips 3-8

cm when speaking. When the [PTT] key is pressed, the screen displays , indicating that the transmission starts.

Receipt

When receiving, release the [PTT] key to enter the receiving state. When the channel you a re using is called, you can hear the other party's voice. If
the s ignal is weak and you set a high squelch level for your radio, you may not be able to hear the call.
In the power-on state, press the [V/M] key to switch between the above three modes.
Menu function s ettings

indicates that it is transmitting.

indicates that the beep switch is ON.

indicates the battery charge status and serves as an indicator for charging the battery.