Radica Games 74022 User Manual
E
B
UTTON FUNCTIONS
HOME PLATE CONSOLE
ON/OFF
level of difficulty will effect how fielding is performed: When “Minors” level
is selected, the game automatically throws to the best base. In “Majors”,
the player has to press (on the D-pad) the base that they want to throw
to. In “All-Stars”, the player has to press (on the D-pad) the base that
they want to throw to and make a throwing motion with the ball. You can
throw the ball several times in order to make double or triple plays.
PLAYING PLAY TV BASEBALL 3
If your Play TV Baseball 3 is connected to your TV, turn on the TV, then set the
TV to the appropriate video input mode (see set-up section of this manual). If
your Play TV Baseball is connected to your TV through a VCR, turn on the TV
and VCR, then set both the TV and VCR to the appropriate video input modes
ENTER
DIRECTIONAL PAD
(see set-up section of this manual). Next, turn on the power to your Play TV
Baseball by pressing the On/Off Button on the home plate console. After a brief
start-up animation, the Game Selection Menu will appear on the TV screen.
Model 74022
For 1 to 4 players / Ages 8 and up
I
NSTRUCTION MANUAL
Get off of the couch and into the game!
Whether you are hitting a home run or making a double play, Play TV Baseball 3
brings the fun and excitement of baseball into your living room! Pitch, bat and
play the field, just like the real thing!
P/N 82392400 Rev.A
SETTING UP
• SOFT BAT ASSEMBLING
To assemble your Play TV Baseball 3 bat please insert the soft bat tip into the
plastic handle until you hear a click.
Note: This is a one time assembly. To avoid damage please do not use
the bat without the soft tip attached.
Bat Handle
Y INST
TTER
• BA
On the back of the main unit, loosen the screw
on the battery compartment and insert four
(4) “AA” (LR6) batteries as indicated
inside the compartment (alkaline batteries recommended). Replace
the battery compartment door.
NOTE: Batteries in the Main
Unit should give you about 10
hours of game play (if alkaline
batteries are used). The
game will not operate normally when the batteries begin to
run low. The screen may be
blurred and resetting the
game may not work. Be sure to install fresh batteries. There is also no
memory function. All game data will be erased when the power is turned
off or batteries are replaced.
On the bottom of the bat handle loosen the screws on the battery compartment. Insert two (2) “AA” (LR6) batteries, aligning the positive (+) and
negative (-) terminals as indicated. Insert the positive terminals facing
down. Replace the cover and tighten the screws.
T SUPER
ADUL
TERIES.
ALLATION
VISION IS RECOMMENDED WHEN INST
• TV CONNECTION
NOTE: To connect Play TV Baseball 3 directly to a TV, the TV must be equipped
with audio and video input jacks. They are commonly found on the front of the
TV near the contrast, color and picture adjustment controls or on the rear of the
TV near the antenna and cable/satellite jacks.
If your TV does not have audio and video input jacks, you may connect
Play TV Baseball 3 through a VCR connected to your TV.
Please note: If your TV does not have AV Input Jacks, you can connect
your game through your VCR or use an RF Modulator. RF Modulators
can be purchased at most electronic stores.
• CONNECTING TO A VCR
To connect Play TV Baseball 3 to your VCR, insert the yellow video plug from
the Main Unit into the video-in (Yellow) jack on your VCR, the white audio plug
into the left audio-in (white) jack. Then set the VCR to the appropriate video
input mode (see your VCR’s operating manual for details).
ADULT SUPERVISION IS RECOMMENDED WHEN CONNECTING
CABLES TO A TV AND VCR.
Bat Tip
ALLING BA
-
T
POWER – Pressing the Power Button will turn Play TV Baseball 3 on or off.
DIRECTIONAL PAD – Used to navigate the menu screens. Press Enter
to make your selection.
ENTER – Used to make selections in menu scr
B
ALL CONTROLS
A-BUTTON
/ENTER
A-BUTTON/ENTER – Use the A-Button/Enter in combination with the B-
Button and C-Button to perform certain pitches and to make menu selections.
B-BUTTON – Use the B-Button in combination with the A-Button and CButton to perform certain pitches.
C-BUTTON – Use the C-Button in combination with the A-Button and BButton to perform certain pitches.
DIRECTIONAL P
bases to throw to when fielding and to navigate menu screens.
THROWING – Make thr
AD –
Use the dir
owing motion when fielding and pitching.
ectional pad to aim pitches, select
eens.
B-BUTTON
C-BUTTON
BAT CONTROLS
STEAL
BUNT
SWING – Stand over the main console when swinging.
BUNT BUTTON – Use the bunt button in gameplay to bunt.
STEAL BUTTON – Use the steal button in gameplay to have a runner
steal a base.
eset bat.
RESET BUTTON – Pr
ess to r
RESET
GETTING STARTED
WARNING: Make sure you place the Home Plate Console on the floor in
ont of the TV
fr
people to avoid striking anything or anyone when you swing the bat.
T BA
A
IMPOR
place your bottom batting hand through the Safety Strap on the bottom of
the bat handle.
SWING A
Swing the bat to hit the pitch. The batter’s timing and force will determine dir
BUNTING – The batter must hold down the bunt key on the bat. This
can be done anytime; when the pitcher is standing on the mound, the
pitcher is in the windup, or after the ball has been pitched. A ball will
only be bunted if it passes through the strike zone.
STEALING BASES – At any stage of the pitching r
choose to have one of their runners attempt to steal a base. The batter
can make a runner steal by pr
, located far enough fr
T
ANT SAFETY NOTE: Befor
T
Y –
A
W
ection and distance.
ake your stance over home plate and wait for the pitch.
T
THROWING THE BASEBALL
ning: When making the throwing motion, you must never let go of the
ar
W
baseball. Doing so can damage the game, damage whatever it hits, or
injure whomever it hits.
PITCHING – The pitcher uses the dir
o pitch the ball, the player must make a thr
Indicator on the scr
ing motion while holding down a combination of the A, B, or C buttons.
The ball indicator will disappear and the pitcher will perform his wind-up
. The type of pitch that the player thr
ow
and thr
path through the air. There are seven (7) different pitches: Fastball,
ewball, Knuckleball, Splitter
Scr
FIELDING – Once the ball is fielded, select which base, by using the
directional pad on the ball, then make a throwing motion. The selected
een. T
om the TV and any other objects or
e beginning game play, make sure to
outine, the batter can
essing the steal button on the bat.
ectional pad to move the Ball Aim
ows will af
, Slider, Changeup and Curve Ball.
fect the ball’
ow
-
s
Using either the directional pad on the ball or on home plate, you will be
able to scroll through the menu options (Play Ball, Quick Start, Mini
Games, Options). The currently selected option will be highlighted.
Using the bat, the ball or the enter key (see button functions section of
this manual) to make your selection.
You can choose from 2 different modes of game-play: Full-game Mode
and Mini-game Mode. You will also be able to select the amount of players, teams, number of innings and batting stance.
•
Choose # Players – 1 to 4 Players
Select Home Team – Choose team by scrolling through a list of six-
•
teen (16) teams.
• Select Away Team – Choose team by scrolling through a list of sixteen
(16) teams.
• # of Innings – Choose 3, 6 or 9 innings.
•
Batting Stance – Choose right handed or left handed.
Note: Pressing Left or Right will switch between the players, while
pressing Up and Down will toggle between a left-handed and righthanded batting stance for the currently selected player.
PLAY BALL / FULL-GAME MODE – allows you to play a standard 9
inning full game of baseball with 1-4 players. Y
your MLB city teams and what inning you wish to start in (1st, 4th, or
7th). You will be able to FIELD, STEAL bases, and BUNT.
QUICK START – In this mode, after choosing the number of players, a
full game will start with the following settings:
• Home and Away teams will be selected randomly
All players will be assigned right-handed batting stance
•
• Choose Sides
o One Player = Home Team
wo Players = 1P Home, 2P A
T
o
MINI-GAMES MODE – allows you to choose fr
to practice the different skills used in FULL-GAME Mode.
•
Home Run Derby
In this mode, the player(s) will attempt to hit as many homeruns as possible before their turn ends. Each player is given 10 outs before their
turn is over. The player with the most home runs wins. The following
rules apply to Home Run Derby:
Any hit that is not a home run is an out
•
Any pitch that is swung at and missed will be consider
•
• If the player does not swing at a pitch, this will not be considered a
strike and will not be counted as an out
Note: When the current player gets their 10th out, the player can pass
the bat to the next player. When the next player is ready, they can
swing the bat to start their turn.
•
Make the Play
In this mode, the player(s) will play as the fielding team and attempt to
make the corr
runners are on base. Before the ball is hit the following information is
given to the player:
• Which player is in the field, “Player 1”
• Number of runners on base
• Bases that are occupied by runners
• Number of outs
The player will pitch the ball (any pitch) and a computer controlled batter will hit the ball to a location in the field. The player will attempt to
throw the ball to the correct base or bases that best suit the current situation. After the play is finished, the play will be scored on the following:
• 100 points per out
• 25 points will be deducted for throwing to the wrong base
(
Note: this will also be deducted if the player misses the opportunity
for a double or triple play)
• 50 points will be deducted for any runner that scores
Difficulty Levels – From the main menu, the player can adjust the games
level of difficulty. Play TV baseball has 3 levels of difficulty:
Minors: Fielding is done automatically, batting and pitching are EASY
•
Majors: (default difficulty setting): The player has to press the correct
•
base (on D-pad) to field the ball, batting and pitching are MODERATE
•
All-Stars: The player has to press the correct base (on D-pad) and
make a throwing motion to field the ball batting and pitching are
DIFFICULT
If a player’s controlled team is batting and they are playing against a
computer controlled team, then the screen will prompt the player to
“Swing the Bat to Begin”. When the player swings the bat, this indicates
ect play depending on wher
way
ou will be able to choose
om 2 different mini-games
ed an out
e the ball is hit and how many
that they are ready and the pitcher will begin his routine. If there are
human players playing for each team, or if a player controlled team is
pitching against a computer controlled team, then the player pitching can
start immediately.
Once the pitcher has thrown the ball, the batter will attempt to hit the
ball. When the ball is hit the BATTER’S VIEW screen will show the initial
trajectory and angle of the ball quickly before switching to the FIELDING
VIEW screen.
When a run is scored, the new score update will show in the score box.
GAME VIEWS
BATTER’S VIEW – will be shown whenever someone is up to bat, or a runner
attempts to steal a base. The following information will also be shown:
• COUNT –Number of Balls, Strikes, and Outs
STRIKE ZONE –A box that represents the “strike zone” when a player
•
is up to bat.
BASE INDICATOR –A picture of the baseball diamond to indicate
•
which bases currently have runner.
• HEADS UP DISPLAY
o Full Game Mode – The inning number and both team’s score
o Home Run Derby –The number of home runs and outs
o Make the Play Mode – The play count and the score
•
PITCH DESCRIPTION – Will be displayed after the ball is thrown, indicating the type of pitch and the speed.
•
THROWING – To throw the ball the player must use force and a throwing movement. The degree of force will determine the speed of the
ball. Once the throwing sensor has been activated the Ball Aim
Indicator will disappear and the pitcher will wind up and throw.
BATTING
Batting will take place in BATTER’S VIEW with three different actions: SWINGING, BUNTING, and STEALING.
• SWINGING – Once the pitch has been thrown, the player should swing
the bat to hit the pitch. Hitting the ball is a matter of timing.
•
BUNTING – To bunt the ball instead of swinging at it, hold down the
BUNT button on the bat. This can be done at anytime. The ball will
only be bunted if the ball passes through the STRIKE ZONE, balls that
miss the STIKE ZONE when the BUNT button is pressed will not be
counted as strikes.
NOTE: The earlier the BUNT button is pressed in the pitchers wind-up,
the more the fielders will be prepared for the bunt. It is most advantageous to press the BUNT button right before the ball travels through
the STRIKE ZONE.
•
RUNNING AND STEALING BASES – Once a ball has been hit, the
computer will control the base running. However, a player can choose to
attempt to steal a base at any stage of the pitching routine. To steal a
base, press the STEAL button on the bat
F
IELDING
The computer will be in control of moving the players around the field and
catching the ball. Once a fielder is in control of the ball, the player will use the
ball interface to throw. The player will select where they want to throw the ball
by using the DIRECTIONAL PAD, (and making a throwing motion with the ball if
in All-Stars difficulty level). The player can throw the ball multiple times in order
to try to get Double and Triple plays
uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
90-DAY LIMITED WARRANTY
(This product warranty is valid in the United States and Canada only)
Radica Games Limited warrants this product for a period of 90 days from
the original purchase date under normal use against defective workmanship and materials (batteries excluded). This warranty does not cover
damage r
service or other causes not arising out of defects in material or workman-
hip. Radica Games Limited will not be liable for any costs incurred due
s
o loss of use of this product or other incidental or consequential costs,
t
xpenses or damages incurred by the purchaser. Some states do not
e
allow the exclusion or limitation of incidental or consequential damages,
so the above limitations may not apply to you. This warranty gives you
specific legal rights and you may also have other legal rights, which vary
fr
During this 90-day warranty period, the game will either be repaired or
replaced (at our option) without charge to the purchaser when returned
prepaid with proof of date of purchase to: Radica USA, Ltd., 13628-A
Beta Road, Dallas, Texas 75244, USA. Please remove the batteries and
wrap the unit carefully before shipping. Please include a brief description
of the problem along with your return address and mail it postage prepaid.
esulting from accident, unreasonable use, negligence, improper
om state to state.
FIELDING VIEW – will be shown after the ball is hit or if a runner
attempts to steal a base. The following information will also be shown:
• BASE INDICATOR – will display the location of all the runner while the
ball is being fielded to help the player know wher
e the ball needs to be
thrown.
• SCORE / INNING
e
o Full Game Mode – The inning number and both team’
s scor
o Home Run Derby –The number of home runs and outs
Make the Play Mode – The play count and the score
o
PITCHING
• If the player pr
esses RIGHT on the DIRECTIONAL PAD, the ball will be
thrown to first base.
• If the player presses UP on the DIRECTIONAL PAD, the ball will be
thrown to second base.
• If the player presses LEFT on the DIRECTIONAL PAD, the ball will be
thrown to third base.
• If the player presses DOWN on the DIRECTIONAL PAD, the ball will be
thrown to home plate.
• If the player presses NOTHING on the DIRECTIONAL PAD, the ball will
be thrown to the pitcher after a brief period of time.
CAUTION
• As with all small batteries, the batteries used with this device
should be kept away from small children who might still put things
in their mouths. If a battery is swallowed, consult a physician
immediately.
e you insert the battery correctly and always follow the
Be sur
•
device and battery manufacturer’s instructions.
• Do not dispose of batteries in fire.
• Batteries might leak if improperly installed, or explode if recharged,
disassembled or heated.
• Sometimes, a build-up of static electricity (fr
cause the game to stop working. Just reset the game, and it will
work again.
om carpets, etc) may
IMPORTANT: Before returning the unit for repair, test it with fresh alkaline
batteries. Even new batteries may be defective or weak and low battery
power is a frequent cause of unsatisfactory operation.
Distributed by:
R
ADICA U.S. Ltd.
13628-A Beta Road
Dallas, TX 75244-4510
RADICA: ®
PLAY TV IS A REGISTERED TRADEMARK
OF RADICA GAMES L
©2005 RADICA GAMES LTD.
PRODUCT SHAPE™
ALL RIGHTS RESERVED
TD.
• AIMING – Use the DIRECTONAL P
TOR on the scr
een. The cursor will indicate wher
AD to move the BALL AIM INDICA
e the pitcher is aiming
their throw.
NOTE: The type of pitch selected will affect the ball’s path through the
air.
• PITCH SELECTION – Use the 3 PITCH SELECTION buttons A, B, or C
to determine what type of pitch will be thrown.
NOTE: The PITCH SELECTION is not locked until the throwing motion
begins.
MAINTENANCE
.
Handle this device car
•
e this device away fr
Stor
•
• Keep this device away from moisture or extreme temperature.
Do not disassemble this device. If a problem occurs, pr
•
button of
f and on, or r
device, or try new batteries. If pr
information located at the end of this instruction manual.
Use only the r
•
Do not mix old and new batteries.
•
-
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Do not use rechargeable batteries.
• Do not attempt to recharge non-rechargeable batteries.
• Remove any exhausted batteries from the device.
• Do not short-circuit the supply terminals.
• Insert batteries with the correct polarity.
Please retain this for future reference.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
efully
om dusty or dirty ar
emove and r
eplace the batteries to r
oblems persist, consult the warranty
ecommended battery type.
eas.
ess the Power
eset the
WARNING: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
Loading...