Radiant TS8100-TH-V, TR8100VTM Instructions Manual

TS8100 Touch
Screen Timer

Specication

• 16 Amp rating (suitable for all heated

towel rails)

• Polar White with Blue backlit display

• Manual or Program mode

• Timing: 2 on and 2 o times per day

• 5/2 or 7 day timing mode

• Keypad Lock function

• 120mm x 80mm x 18mm

(ts into a standard wall box / bracket)

• 2 year warranty

• Also Available in Black & Silver Finish

(TS8100-TIM-V only)

• Models available

• TS8100-TIM-V (Vertical Orientation)

• TS8100-TIM-H (Horizontal Orientation)

• TS8100-TIM-V-VP (Variable Power)

• TS8100-TH/TIM-DUAL-V

(Timer & Thermostat Combination Unit)

Technical Questions please call

AU: [phone]

NZ: [phone]

TR8100VTM Timer Switch Instructions

ver 2.0

See overleaf for further setting up information

Page1

LCD symbols

Symbol Event

The buttons are locked

Power button, to turn on/off the timer switch

Menu button, to enter into menu settings

Program button, to program your thermostat

To confirm your settings

To move to the next setting options

To increase the set value

To decrease the set value

Symbol Event

Temporary override

Configuration Menu

To enter into the setting menu please follow the steps below:

Step 1, Turn the timer switch off by pressing ;

Step 2, Press

, you will then see menu 01.

Step 3, Use the up and down arrows to adjust Menu 01

Step 4, Press

to move to the next Menu and once you have all the menu options set,

Setp 5, Press to accept and store.

Menu # Feature Explanation Adjustment（press up & down buttons to adjust）

01

02

Clock Format

You can select the clock to show in either 12 or 24 hour time

24 (default), 12

Program Mode

This allows you to program either 5 days at once, then the 2
days of the weekend separately, or a full 7 days at the same
time or 7 days separately, or countdown timer only

01 = 5+2 day programmable (default)
02 = 7 day programmable

Setting the clock and day of the week

This timer switch is fitted with a real time clock. It is essential that the clock time and day are set accurately if you require your programmed events to start

on time. To set follow the steps below:

Touch the time display and the time will start flashing. Use the up and down arrows to set the time.By holding the arrow down the time will change faster.

Press

to move to the Day setting and use the up and down arrows to get to the correct day.

Press

to store and exit.

Override

NEXT

MENU

MENU

SCHEDULE

DONE

NEXT

POWER

POWER

DONE

1

2

3

NEXT

DONE