Radiance TAWR13, TAWR13JB, TAWR16, TAWR16JB, TASP18SD User Manual

...
For service contact:
German Knife Inc.
1-800-500-3519
www.turboairinc.com
OWNER & OPERATOR INSTRUCTION MANUAL
Model No.
TAHP-12-2 TAHP-24-4 TAHP-36-6 TAHP-48-4
TARB-12 TARB-24 TARB-36 TARB-48
TAMG-12 TAMG-24 TAMG-36 TAMG-48
TATG-24 TATG-36 TATG-48
TASP-18S TASP-18
TAWR-13 TAWR-13-JB TAWR-16 TAWR-16-JB
IMPORTANT SAFETY NOTICE
IMPORTANT
In the event a gas odor is detected, shut down units at main shutoff valve and contact the local gas company or gas supplier for service.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or other appliance.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
www.turboairinc.com
TABLE OF CONTENTS
PAGE
INSTALLATION
OPERATING INSTRUCTION
MAINTENANCE
WARRANTY INFORMATION
3
4 - 5
6
7
German Knife Inc
4184 E. Conant St., Long Beach, CA 90808
Phone : 800-500-3519
Fax : 310-900-1066
www.turboairinc.com
SHIPPING DAMAGE CLAIM PROCEDURE
The equipment is inspected & crated carefully by skilled personnel before leaving factory. The transportation company assumes full responsibility for safe delivery upon acceptance of this equipment if shipment arrives damaged ;
1. VISIBLE LOSS OR DAMAGE : Note on freight bill or express delivery and have signed by person making delivery.
2. FILE CLAIM FOR DAMAGES IMMEDIATELY : regardless of extent of damages.
3. CONCEALED LOSS OR DAMAGES : If damages are noticed after unpacking, notify transportation company
immediately and file “Concealed Damage” claim with them. This should be done within fifteen(15) days from date delivery is made to you. Return container for inspection.
2
INSTALLATION
UNPACKING :
1. Remove appliance from container.
2. Remove all protective packaging material.
3. Retain container and packaging material until the appliance is operated and found in good condition.
4. Check appliance for any shipping damage. If appliance shows any external or internal damage, promptly inform dealer/distributor where you bought your appliance.
NOTE: Installation and repair should be done by a qualified service person. Qualified service person; who have read these instructions and is familiar with the operation and functions of the equipment.
GENERAL SAFETY INSTRUCTIONS :
Accidents are always tragic especially because so many of them could have been prevented with little care and judgment. There are some basic good practices; we hope you will follow for safe use of the equipment.
IMPORTANT SAFETY INFORMATION
• Always maintain proper clearances from combustible materials.
• Ventilation air supply must be maintained at all times when the equipment is operating.
• Never connect equipment to an unregulated gas supply.
• Gas supply connections should be checked utilizing soap solution. Never use a flame for gas leak checks.
• Service and repair should be done by a qualified service person. Do not service while hot or operating.
3
Loading...
+ 4 hidden pages