Radialight AER Pro Operating Instructions Manual

1
AER Pro
IT - Si prega di conservare con cura questo libretto d’istruzioni per future consultazioni
GB - Please retain these instructions in a safe place for future reference
2
OPERATING INSTRUCTIONS
Before operating the appliance, please read these instructions thoroughly to avoid damage and hazardous situations. Any use of this product other than that stipulated in this instruction manual may cause fire, electric shock or injury, and voids all warranties.
Warranty does not apply to any defect, deterioration, loss, injury or damage caused by, or as a result of, the misuse or abuse of this heater. The rights dictated by State law are not prejudiced. None of the terms of this warranty are to be taken as excluding any conditions or warranties implied by State law, which cannot be excluded or modified. Before any operation remove the packaging and check product integrity. In case of defects or damages do not try to repair it yourself but contact your dealer. Do not let children play with the packaging and protect the environment by disposing of the packaging in accordance with the national regulations for waste processing.
Used in air cooling mode (COOLER/AIR WASHER FUNCTION) this product delivers cool and humid air due to the cold water in the tank , thus giving a pleasant feeling of freshness
1. For your safety
This appliance is intended for normal household use and not for
use in commercial/industrial environment, in vehicles or on board ships or aircrafts.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless
continuously supervised.
Children aged from 3 years and less than 8 years shall only
switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Unplug the appliance during filling and cleaning. Ensure that the fan is switched off from the supply mains before
removing the guard and the filter.
3
This appliance is to be used on a smooth and flat (not inclined)
floor.
2. Features
Humidification and cooling function. Timer function: working time adjustable from 0.5 to 7.5 hours. Infrared remote control. Automatic water refilling and water pump protection function in case the tank is empty. 4 wind speed: Strong, high, medium and low. 3 wind modes: normal, natural, and sleeping. Electronic keypad control, LED display. Automatic oscillation for vertical louver, adjustable horizontal louver. Omni-directional wheel design for easy moving. Sound alerts when power on, shutdown, pressing buttons (power on: double beep, button-pressing: single beep,
power off: long beep).
Smart memory for unexpected power cut off : resume to original setting if the power resumes within 30 seconds After working for 200 hours, the filter clearness indicator goes on (the machine will not automatic turn off, nor will
the cooling function shut down if the function is started before); Pressing the Cooling / Air washer key for 3 seconds to eliminate the warning.
3. Components and accessories
Product structure diagram
1. Operation panel
2. Function display window
3. Air outlet
4. Water inlet
5. Water level display window
6. Rear wheels
7. Caster
8. Remote control depository
9. Handle
10. Reel
11. Power cord
12. Dust-proof filter
13. Automatic filling component
14. Water tank
15. Water plug
4
Accessories
Remote Control
Operation panel
Display panel
VENTILATION MODES
VENTILATION SPEEDS
FUNCTIONS
NORMAL
LOW
COOLER
AIR WASHER
NATURAL
MEDIUM
SWING
SLEEP
HIGH
FILTER
CLEARNESS
INDICATOR
STRONG
Remote control operation panel
5
4. Installation and usage
Installation method
The product can be used directly after unpacked (without installation).
Usage of keys
The keys are tapping type. You can tap the operation panel to trigger respective function.
1. When the power is initially turned on, the buzzer beeps twice and enters the standby state; except power/speed key, other keys are invalid.
2. Power ON/SPEED key
In standby mode, all keys except the Power on / Speed key are invalid; press this key to turn on the device, and the circuit enters the working state. The initial speed of the device is medium, and turns to low automatically after 3 seconds, corresponding LED lamp lights up, and it is normal mode, and the timer, wind direction, and cooling / humidification function are invalid. In power-on state, press this key to switch the wind speed in the sequence: Low → Mid → High → Strong →
Low ...... and so on. The speed LED indicator in this process also changes accordingly.
3. Power OFF key
In power on state, press this key to turn off the device, and the system returns to standby.
4. COOLER / AIR WASHER key
In power on state, press this key to switch on/off the cooling / humidification function, press this key once to turn on the cooling / humidification function, the pump starts, and cooling / humidification LED lamp lights up, and press this key again to turn off the cooling / humidification function.
5. SWING key
In power on state, press this key to switch on/off the left and right wind direction adjustment function; press this key once to turn on the swing function and swing LED light, and press it again to turn off the swing function.
6. TIMER key
After turned on, the device doesn’t have timer by default, and timer LED light is not displayed. Press this key to
set the timer: 0.5h → 1.0h → 1.5h → 2.0h ...... 7.5h → no timer → 0.5h; in this process, the timer LED indicator
also changes accordingly.
7. MODE key
After turned on, the initial mode is normal by default; press this key to switch the mode in the sequence:
normal→ natural→ sleeping→ normal ......; in this process, the mode LED indicator also changes accordingly
(no natural and sleeping mode in strong level). Press the Mode key to switch the wind mode, and the operation is as follows:
MODE = Normal wind
Available speeds: Low, Medium, High or Strong. In the normal wind mode the product works continuously at the set speed (Low→ Medium High Strong)
MODE = Natural wind Available speeds: Low, Medium or High. Operation profile of natural wind mode is as following pictures (Low→ Medium High).
High speed Medium speed Low speed Stop
6s
6s
6s
3s
12s
12s
3s
6s
15s
3s
6s
6s
6s
Natural mode in LOW speed
High speed Medium speed Low speed Stop
6s
6s
12s
6s
3s
6s
6s
6s
6s
6s
6s
3s
6s
6s
6s
Natural mode in MEDIUM speed
Loading...
+ 11 hidden pages