Radial Engineering Shotgun User's Guide

MIXER AND EFFECTS LOOP

User Guide

Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam BC V3C 5M5

Tel: [phone] • Fax: [phone] • Email: [e-mail]

SHOTGUN™ GUITAR SPLITTER AND BUFFER USER GUIDE

Introduction ...................................................................................... 1

Features .......................................................................................... 2

Overview.......................................................................................... 3

Making Connections ..................................................................... 4-5

Using the Polarity Reverse .............................................................. 6

Using in Stereo ................................................................................ 7

Extreme Application ......................................................................... 8

Specications .................................................................................. 9

Warranty ......................................................................... Back Cover

Thank you for purchasing the Radial Shotgun, a powerful tool made for guitarists that insist on pushing great tone to the limit!

Although the Shotgun is super easy to use, we ask that you please take a couple of minutes to go through this short
manual. This will not only help you maximize your tone, it will ensure you get the most out of the Shotgun with your setup.

Once you are done, if you nd yourself asking questions, please visit the FAQ page on our web site. This is where we post
questions and answers for players like yourself. Then, if you still nd yourself looking for more, we invite you to send us
an email at [e-mail] and we will do our very best to reply in short order.

Now get ready to get more bang out of your amps than ever before!

Radial Engineering Ltd. Shotgun™ User Guide

1

FEATURES

1. POWER: Standard 9V connection for standard Boss-type

power adaptor or DC brick. PSU is not included.

2. OUT-1 DIRECT: Used to connect to your rst amp.

Provides the Shotgun with a ground reference for safety.

3

2

1

3. OUT-2, 3 & 4: Transformer isolated outputs to eliminate

ground loops and help reduce hum and buzz.

4. IN-1 MONO: When used alone, sets the Shotgun to the
1x4 mono mode with input-1 driving all four outputs.

5. IN-2 STEREO: When used, changes the circuit from 1x4
mono to 2x2 stereo to allow stereo sources such as a

6

5

chorus to drive 1 or 2 sets of amps.

6. POWER LED: Lets you know the Shotgun power supply

4

is properly connected.

7. 180º: On outputs 2, 3 & 4 toggles the polarity of the
outputs to ensure all your amps play in relative phase.

89 7

8. LIFT: On outputs 2, 3 & 4 lifts the audio ground to help

prevent hum and buzz caused by ground loops.

9. STEEL CASE: Heavy 16-gauge steel case provides
shielding from power supplies and keeps the internal

+

The Shotgun requires a 9 volt power

supply with a negative center.

-

electronics safe from abuse.

Radial Engineering Ltd. Shotgun™ User Guide

2