Radial Engineering DiNET DAN-RX2 Users Manual

®

True to the Music™

DiNET DAN-RX2

2-Channel Dante Network Receiver

User Guide

Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
Tel: [phone] • Fax: [phone]
Email: [e-mail]

www.radialeng.com

Radial® DAN-RX2 User Guide

Table of Contents Page

Overview.......................................................................................1

Features ................................................................................... 2-3

Getting Started .............................................................................4

Making Connections .....................................................................5

The Headphone Amplier .............................................................6

Specications ...............................................................................7

Warranty .......................................................................Back cover

Thank you for purchasing the Radial DiNET DAN-RX2. The
DAN-RX2 is a high-resolution digital-to-analog converter that
is designed to connect to a Dante or AES67-enabled Ethernet
network — seamlessly transferring the audio stream to a pair
of balanced audio outputs to feed a PA, recording device or
broadcast mixing console.

This manual covers the setup and operation of the DAN-RX2
in various applications. Please take a few minutes to read
through and familiarize yourself with the DAN-RX2 features and
functions. If you have any questions that are not covered in this
manual, please consult the FAQ section on our website. This is

where we post the latest updates. If you still do not nd what you

are looking for, feel free to send us an email at info@radialeng.
com and we will do our best to reply in short order.

®

True to the Music

OVERVIEW

The Radial DiNET DAN-RX2 is a professional grade digital-to-analog

audio converter designed specically for use with Dante or AES67-

enabled networks. It allows you to create a stereo audio endpoint at
any location within a Dante network, featuring an Ethernet connector to
receive the digital signal, and balanced analog outputs to feed mixing

consoles, power ampliers, or self-powered speakers.

High quality 24bit/96kHz converters provide pristine audio and ensure
that the digital source content is reproduced as faithfully as possible, and
a rugged 14-gauge steel chassis features a locking etherCON connector
carrier that protects the Ethernet connectors from damage. The DAN-

RX2 also features a built-in headphone amplier with an adjustable level

control, allowing you to easily check the audio signals or feed a monitor
mix to any destination.

Dante Network

Cat 5e / Cat6

The DAN-RX2 is easy to use, with no setup required on the device

itself. It is completely congured by Dante Controller, which manages

digital audio routing across the Dante network. Dante Controller is a
software application by Audinate™ that allows the user to manage all
Dante-enabled devices across a network. Use Dante Controller to route
audio to the DAN-RX2 and all other components on the network. Simply
connect the DAN-RX2 to the network and it will automatically appear as
an available output device within Dante Controller.

The DAN-RX2 will initially have the name “DiNET-RX2-xxxxxx”, where
the last 6 digits will be the unique media access control address (MAC
address) of your DAN-RX2. As this can be changed to a user-generated
name using Dante Controller, we recommend writing down the MAC
address of your unit in the space provided below for future reference.

Record your DAN-RX2 MAC address here:

DiNET-RX2-__________________

Dante Controller can be downloaded for free at www.audinate.com. For

the latest rmware for the DAN-RX2 please visit www.radialeng.com.

Radial Engineering Ltd.

1

DAN-RX2