
H O M E S T O R A G E P R O D U C T S
Interchangeable
™
Storage System
The easy way to get stuff from
the place where you store it, to
the place where you use it.
WALLDOCK 3-PACK | SWD-3B
INSTRUCTIONS
WWW.RACORSTORAGESOLUTIONS.COM
Mounting Instructions Installing and customizing your storage is a snap!
WARNING Please read installation instructions carefully prior to installing. Before using the product thoroughly test
the fully-weighted product (with equipment in place) to ensure the product has been installed properly. Do not allow
children to play on product. ITW Brands is not responsible for any damage resulting from improper installation, overloading or product failure.
Place WallDock on wall with
1
the red tab pointing down.
Mark location of mounting
holes.
Pre-drill 1/8” mounting
2
holes.
Secure WallDock to stud
3
with 2 screws provided.

Press cover over WallDock
4
until it snaps into place.
Slide Hook or Hanger over
5
WallDock until it snaps into
position.
NOTE
When installed properly into a wooden stud, WallDock Hangers and Hooks will hold over 50 lbs. When installing on drywall,
locate the stud behind the drywall and drill screws through the drywall and into the stud for best results.
Once the WallDock is securely mounted, just snap any item from the Snap2It family of products over the
WallDock so it snaps behind the red tab. Remove by pushing up on the red button. It’s easy to take it with
you or snap it onto another WallDock to change location.
Limited Warranty: These products are sold “as is” without any express or implied
warranties. ITW Brands’ sole liability, if any, shall be to replace this product or refund
the purchase price. The performance of these products is subject to variable
conditions and maximum load ratings are shown for comparison purposes only.
SWD-3B
Made in China
ITW Brands, A division of Illinois Tool Works Inc.
955 National Parkway, Suite 95500
Schaumburg, IL 60173
800-783-7725
www.RacorStorageSolutions.com
Email: racorcs@itwbrands.com
© 2011 Illinois Tool Works Inc.
Racor and Racor logo are registered trademarks of Illinois Tool Works Inc.
H O M E S T O R A G E P R O D U C T S
Thank you for purchasing this product.
Racor storage and organizational
solutions will inspire and put you back
in control of your space. Racor has the
largest variety of solutions to organize
and store bikes, sports equipment,
lawn and garden supplies, bulky items
like ladders and totes, and clutter items
like tools. Please visit
www.RacorStorageSolutions.com for
other great organizational products.

The Racor Snap2It Family of Products
All items fit on the standard WallDock
Hose Storage Hanger
Securely hold garden hose, pool hose,
and more.
| SHR-1B
Vertical Storage Hook
Securely holds bikes, power tools, garden
supplies and more.
Tool Hanger
Securely holds 3 long handled tools.
| SVS-1B
| STH-1B
Catch-All Basket
Securely holds cleaning supplies, garden
tools, paint cans, and more.
Multi-Use Hanger
Securely holds ladders, lawn furniture,
extension cords and more.
| SMH-2B
| SNB-1B
Cord Wrap
Securely holds extension cords, rope,
| SCW-1B
or chain
Utility Hook
Securely holds power tools, garden
supplies, and more
| SUH-2B
WallDock 3-Pack
Additional WallDocks for use with
Snap2It Hooks, Hangers, and Baskets
| SWD-3B