Rackmount Solutions RP-W119QD, RP-W819QD, RP-119QD, RP-919QD, RP-117QD User Manual
...
Contents
Chapter 1 Getting Started
1.1
Important Safeguards.........................................................1
1.2
Regulatory Notice...............................................................2
1.3
Before Installation...............................................................3
1.4
Unpacking...........................................................................3
1.5
Optional Accessories..........................................................3
1.6
Peripheral Products............................................................4
Part 1 Widescreen LCD Quad Display
Chapter 2 RP-W922QD & RP-W819QD
2.1
Package Contents...............................................................5
2.2
Structure Diagram...............................................................6
2.3
Installation.......................................................................7-8
2.4
Connection.........................................................................9
Chapter 3 RP-W119QD
3.1
Package Contents.............................................................10
3.2
Structure Diagram.............................................................11
3.3
How to Use the Slides.......................................................12
3.4
Connection.......................................................................13
Chapter 4 LCD Specifi cation.......................................................14
Chapter 5 Dimensions......................................................................15
Part 2 4:3 LCD Quad Display
Chapter 6 RP-817QD, RP-919QD & RP-1020QD
6.1
Package Contents.............................................................16
6.2
Structure Diagram.............................................................17
6.3
Installation........................................................................18
6.4
Connection.......................................................................19
Chapter 7 RP-117QD, RP-119QD & RP-120QD
7.1
Package Contents.............................................................20
7.2
Structure Diagram.............................................................21
7.3
How to Use the Slides.......................................................22
7.4
Connection.......................................................................23
Chapter 8 LCD Specifi cation.......................................................24
Chapter 9 Dimensions.......................................................................25
Chapter 10 Operation
10.1
On-screen Display Operation............................................26
10.2
On-screen Menu...............................................................27
Chapter 11 Quad Operation
11.1
Basic System Connection.................................................28
11.2
Alarm I/O Connection & Operation...............................29-30
11.3
Remote Control Connection & Operation.....................31-35
11.4
Quad Display Connection.................................................36
11.5
Quad Display On-screen Menu...................................37-39
11.6
VCR Operations...............................................................40
11.7
Quad Display Specifi cation...............................................40
Chapter 12 Options
12.1
DC Power..........................................................................41
Chapter 13 Troubleshooting..........................................................42
P.41
Blank page
1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi -
cation, or failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
P. 2
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is
given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned envi-
ronment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■ When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equip
ment and invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1.2 Regulatory Notice Chapter 1
1.5 Optional Accessories
■
It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment.
■ The surface for placing and fi xing the Rackmount LCD Drawer / Display should be stable and level or mounted into a
suitable cabinet.
■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■ Convenience for connecting the Rackmount LCD Drawer / Display to the related facilities should be well considers
too.
The Rackmount LCD Drawer / Display comes with the standard parts shown on the package contents. Check and make
sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.4 Unpacking
1.3 Before Installation
Chapter 1
P. 3
1. Power Cord
1.1 IEC power cord
1.2 NEMA 5-15 power cord (US)
1.3 BS 1363 power cord (UK)
1.4 CEE 7/4 power cord (German)
1.5 AS 3112 power cord (Australia)
P. 4
1.6 Peripheral Products Chapter 1
Item Model No. Description
Matrix Cat6 KVM
MU-1602 / MU-1603 / MU-1604
MU-IP1613 / MU-IP1614 / MU-IP1624
MU-3202 / MU-3203 / MU-3204
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
Matrix DB-15 KVM
M-802 / M-803 / M-804
M-IP813 / M-IP814 / M-IP824
M-1602 / M-1603 / M-1604
M-IP1613 / M-IP1614 / M-IP1624
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
Combo Cat6 KVM
U-801 / U-802 / U-IP802
U-1601 / U-1602 / U-IP1602
U-3201 / U-3202 / U-IP3202
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
Combo DB-15 KVM
CV-S801 / CV-802 / IP-802
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
PS/2 DB-15 KVM CV-401 / CV-801 / CV-1601 4 / 8 / 16 port PS/2 DB-15 KVM
Keyboard Drawer
RK-1
RK-2
Rackmount keyboard drawer (with KVM options)
Rackmount keyboard drawer (short depth version)
2.1 Package Contents Chapter 2
P. 5
Rackmount LCD display x 1 pc
6' VGA cable (male to male) x 1 pc
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter x 1 pc
5
4
2
1
3
U
s
e
r
M
a
n
u
a
l
1
5
4
3
2
RP-W819QD & RP-W922QD
S
e
tu
p
V
CR
S
E
Q
<
<
<
>
Q
u
a
d
D
i
s
p
l
a
y
C
o
n
t
ro
l
L
C
D
O
S
D
Me
n
u
2.2 Structure Diagram Chapter 2
LCD interchangeable module kit
2-in-1 LCD + Quad display membrane
Power adapter bracket
1
1
3
2
Front view Rear view
3
2
Power adapter
Power cord
RP-W819QD & RP-W922QD
P. 6
S
e
t
u
p
V
C
R
S
E
Q
<
<
<
>
Q
u
ad
Di
s
p
l
a
y
C
o
n
tro
l
L
CD
O
S
D
M
e
n
u
P. 7
2.3 Installation Chapter 2
■ Install each screws shown in Figure 1.
Figure 1.
Figure 2.
■ Fixed the LCD into the rack.
* M6 screws is not provided.
RP-W819QD
S
e
t
u
p
V
C
R
S
E
Q
<
<
<
>
Qu
ad
D
i
sp
l
a
y
Co
n
t
r
o
l
L
CD
O
S
D
M
en
u
S
e
t
u
p
V
C
R
S
E
Q
<
<
<
>
Q
u
a
d
D
i
s
p
l
a
y
C
o
n
t
ro
l
L
C
D
O
SD
M
e
n
u
P. 8
2.3 Installation Chapter 2
■ Install each screws shown in Figure 3.
* M6 screws is not provided.
Figure 3.
Figure 5.
■ Push the lower part of the LCD into the rack.
RP-W922QD
■ Insert the upper part of the LCD display to the rack shown
in Figure 4.
Figure 4.
Figure 6.
■ Installation completed.
1
43
2
P. 9
2.4 Connection Chapter 2
Caution : The Rackmount LCD Drawer & Display are hot-pluggable, but components of
connected devices, such as the servers and KVM switch, may not be hot-pluggable. Plug-
ging and unplugging cables while servers and KVM are powered on may cause irreversible
damage of the servers, KVM and Rackmount LCD Drawer. Before attempting to connect
anything to the Rackmount LCD Drawer, we suggest that turn off power to all devices be-
fore connecting them. Apply power to connected devices again only after the Rackmount
LCD Drawer receiving power.The company is not responsible for damage caused in this
way.
RP-W819QD & RP-W922QD
RS-232
Alarm I/O
VCR in
VCR out
AV BNC VGA Power
Video IN
1 ~ 4
Video Loop
1 ~ 4
■ Please refer to P.27 - 39
3.1 Package Contents Chapter 3
P.10
RP-W119QD
S
e
t
u
p
V
C
R
S
E
Q
<
<
<
>
Q
u
a
d
D
is
p
l
a
y
C
o
n
t
r
o
l
L
C
D
O
S
D
M
e
n
u
1
4
U
s
e
r
M
a
n
u
a
l
32
LCD drawer x 1 pc
6’ VGA cable (male to male) x 1 pc
User manual x 1 pc
Power cord x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 8 pcs
M6 washer x 8 pcs
5
4
2
6
1
3
7
5
6
7
8
8
3.2 Structure Diagram Chapter 3
P. 11
RP-W119QD
LCD interchangeable module kit
“One Man” Installation Slides
1
1
2
2
LCD + Quad display membrane
Thumb Screw
3
4
3
4
Loading...