Rackmount RKP-217 Series, S-217 Series, S-219 Series, RKP-2415 Series, RKP-219 Series User Manual

...
User Manual
2U Dual Slides LCD Keyboard Drawer
15", 17", 19" screen size
Models RKP-217 / 219 Series
- With KVM Options
- 2U 17”, 19” screen size
- Short depth version
Models S-217 / 219 Series
- With KVM Options
- 2U 17", 19" screen size
- Designed for SUN Solaris
Chapter 1 Getting Started
1.1
Important Safeguards..........................................................1
1.2
Regulatory Notice................................................................2
1.3
Package Contents...............................................................3
1.4
Before Installation...............................................................4
1.5
Unpacking...........................................................................4
1.6
Optional Accessories...........................................................4
1.7
Peripheral Products.............................................................5
1.8
Structure Diagram...............................................................5
1.9
How to Install “One Man” Installation Slides....................6-7
1.10
How to Use The Slides.......................................................8
1.11
How to Use The Dual Slide.................................................9
1.12
“S” Series (Single console)
- Use CB-6 to connect to server via USB interface........................10
1.13
“S” Series (Single console)
- Use CB-6 to connect to KVM via USB interface..........................10
1.14
RKP Series (Single console)
- Use CE-6 to connect to server via PS/2 interface........................11
1.15
RKP Series (Single console)
- Use CE-6 to connect to KVM via PS/2 interface..........................11
1.16
RKP Series (Single console)
- Use CE-6 to connect to server via USB interface........................12
1.17
RKP Series (Single console)
- Use CE-6 to connect to KVM via USB interface..........................12
Chapter 2 Operation
2.1
On-screen Display Operation............................................13
2.2
On-screen Menu...............................................................14
Chapter 3 Standard Speci cation
3.1
Specifi cations..................................................................15
3.2
Keyboard & Mouse.......................................................16-17
3.3
How to Use “NS” keyboard...............................................18
Contents
Contents
Chapter 4 Optional Speci cation
4.1
KVM Options.....................................................................19
4.2
DVI-D Input Option............................................................19
4.3
BNC + S-Video Option.......................................................19
4.4
Audio Option.....................................................................20
4.5
DC power Options............................................................21
4.6
Touchscreen Options........................................................21
Chapter 5 Troubleshooting..........................................................22
Chapter 6 Dimensions......................................................................23
1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modi ed or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi - cation, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us. Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fl uctuation or failure. Use of supplies or parts not meeting our specifi cations. Normal wear and tear. Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
P. 2
Legal Information
First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without no­tice. We are not liable for any injury or loss that results from the use of this equipment.
Safety Instructions
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned envi-
ronment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fi re or electrical shock.
Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equip
ment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifi cations made to this equipment may void the user’s authority to operate this equip- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow­ing measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
1.2 Regulatory Notice Chapter 1
1.3 Package Contents Chapter 1
P. 3
LCD keyboard drawer x 1 pc
CB-6 USB 2-in-1 KVM cable x 1 pc
(for “S” series) or
CE-6 Combo 4-in-1 KVM cable x 1 pc (for RKP series)
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter ( for external power version) x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M6 cage nut x 6 pcs
Cup washer x 8 pcs
5
4
2
6
1
3
7
U
s
e
r
M
a
n
u
a
l
1 6
5
4
3
2
or
7
8
9
8
9
It is very important to locate the LCD Keyboard Drawer in a suitable environment.
The surface for placing and xing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
Position LCD keyboard drawer with respect to related facilities.
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Unpacking
1.4 Before Installation
Chapter 1
P. 4
1.6 Optional Accessories
1. Combo 4-in-1 KVM cable
1.1 CE-6 6 feet
1.2 CE-10 10 feet
1.3 CE-15 15 feet
2. USB 2-in-1 KVM cable
2.1 CB-6 6 feet
2.2 CB-10 10 feet
2.3 CB-15 15 feet
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)
Remarks :
CB-6 is for “S” series only.
P. 5
1.7 Peripheral Products Chapter 1
1.8 Structure Diagram
For RKP-2415 LCD
1
2
3
4
5
Remarks :
“S” Series is for Matrix & Combo KVM only.
Item Model No. Description
Matrix Cat6 KVM
MU-1602 / MU-1603 / MU-1604
MU-IP1613 / MU-IP1614 / MU-IP1624
MU-3202 / MU-3203 / MU-3204
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
Matrix DB-15 KVM
M-802 / M-803 / M-804
M-IP813 / M-IP814 / M-IP824
M-1602 / M-1603 / M-1604
M-IP1613 / M-IP1614 / M-IP1624
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
Combo Cat6 KVM
U-801 / U-802 / U-IP802
U-1601 / U-1602 / U-IP1602
U-3201 / U-3202 / U-IP3202
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
Combo DB-15 KVM
CV-S801 / CV-802 / IP-802
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
PS/2 DB-15 KVM CV-401 / CV-801 / CV-1601 4 / 8 / 16 port PS/2 DB-15 KVM
Remarks :
RKP-2415 / 2417 / 2419 has no membrane switch for KVM option
LCD interchangeable module kit
LCD membrane
“One Man” Installation Slides
Membrane switch (KVM option)
1
2
3
5
6
6
7
7
Keyboard interchangeable module kit
Mouse interchangeable module kit
Carry handle to release the 2-pt lock
4
P. 6
1.9 How to Install "One Man" Installation Slides Chapter 1
Install into rack
1
Attach the left and right mounting bracket to rack 19”
mounting rails.
Adjust the rear mouting bracket to t your rack.
M6 screw and cup washer x 6 pcs included.
Caution : Leaving the screws slightly loose, until
you complete the installation in step
2
Pick up the LCD keyboard drawer.
Insert the LCD keyboard drawer into the mounting bracket.
Pull and hold the left & right black arrow buttons on the rails.
Return the LCD keyboard drawer to park position.
Left front
Right front
4
Mounting bracket
Black arrow button
Left bracket
Right bracket
Front side
Rear side
P. 7
1.9 How to Install "One Man" Installation Slides Chapter 1
Remarks :
NBK-01 is for RKP-217 / 219 & S-217 / 219 series only.
NBK-02 is for RKP-2415 / 2417 / 2419 series only.
Installation procedures of NBK-02 are same to that of NBK-01.
4
3
Tighten all 8 pcs of M6 screw to complete the installation.
Attach front left and right mounting ears of the LCD
keyboard drawer to vertical mounting rails.
M6 screw and cup washer x 2 pcs included.
Complete the installation
P. 8
1.10 How to Use the Slides Chapter 1
Push the keyboard drawer into the rack.
(shown in Figure 3).
Figure 3.
Figure 2.
Pull and hold the black arrow button on either
side of the LCD keyboard drawer to unlock. (shown in Figure 2).
Figure 1.
A black arrow release button is located on the
outside of each slide in the keyboard drawer. (shown in Figure 1).
Caution : Keep your fi ngers away from the
slide stop
For keyboard drawer only
1.11 How to Use The Dual slide Chapter 1
P. 9
Flip up the LCD to a suitable angle shown in
Figure 6.
Figure 6. Flipping up the LCD to a suitable angle.
Figure 5. Pulling the handle toward the front of LCD drawer.
Push the handle toward the front of the upper
LCD drawer (shown in Figure 5).
Gently pull the handle toward the front of the
lower keyboard drawer (shown in Figure 4) .
Figure 4. Pulling the handle toward the front of keyboard drawer.
Figure 7. Operating the LCD keyboard drawer.
Operate the LCD keyboard drawer shown in Figure 7.
P.10
Remarks
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected de-
vices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and un­plugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting them. Apply power to connected devices again only after the LCD keyboard is receiving power. The company is not responsible for damage caused in this way.
1.12 “S” Series (Single console) Chapter 1
- Use CB-6 to connect to server via USB interface
Figure 8. Example of connecting CB-6 2-in-1 USB KVM cable to server via USB interface
1.13 “S” Series (Single console)
- Use CB-6 to connect to KVM via USB interface
Figure 9. Example of connecting CB-6 2-in-1 USB KVM cable to KVM via USB interface
CB-6 KVM Cable
KVM
P. 11
Remarks
RKP-2415 / 2417 / 2419 series are external power version in single console.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected de-
vices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and un­plugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting them. Apply power to connected devices again only after the LCD keyboard is receiving power. The company is not responsible for damage caused in this way.
Figure 11 Example of connecting CE-6 4-in-1 Combo KVM cable to KVM via PS/2 interface
1.15 RKP Series (Single console)
- Use CE-6 to connect to KVM via PS/2 interface
1.14 RKP Series (Single console) Chapter 1
- Use CE-6 to connect to server via PS/2 interface
Figure 10. Example of connecting CE-6 4-in-1 Combo KVM cable to server via PS/2 interface
CE-6 KVM Cable
KVM
P.12
Remarks
RKP-2415 / 2417 / 2419 series are external power version in single console.
The above connection is only for the LCD keyboard without KVM switch built-in.
For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution : The LCD keyboard drawer is hot-pluggable, but components of connected de-
vices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and un­plugging cables while servers and KVM are powered on may cause irreversible damage to
the servers, KVM and LCD keyboard drawer. Before attempting to connect anything to the
LCD keyboard drawer, we suggest turning off the power to all devices before connecting them. Apply power to connected devices again only after the LCD keyboard is receiving power. The company is not responsible for damage caused in this way.
1.16 RKP Series (Single console) Chapter 1
- Use CE-6 to connect to server via USB interface
Figure 12. Example of connecting CE-6 4-in-1 Combo KVM cable to server via USB interface
Figure 13. Example of connecting CE-6 4-in-1 Combo KVM cable to KVM via USB interface
1.17 RKP Series (Single console)
- Use CE-6 to connect to KVM via USB interface
CE-6 KVM Cable
KVM
2.1 On-screen Display Operation Chapter 2
P.13
15" LCD membrane
17" & 19" LCD membrane
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
P.14
2.2 On-screen Menu Chapter 2
OSD Confi guration Page
Image:
To enter into the brighness, contrast, color temp, red, green, and blue
Geometry:
To enter into the auto adjust, H position, V position, phase and clock
Video:
To enter into the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
To enter into volume, bass, treble, balance, AVL and mute
Misc:
To enter into the language, OSD position, graphic mode, ratio, reset and timer
P.15
3.1 Specifi cations Chapter 3
Item Description
Form Factor 1U rack mounting on slide-out rails
LCD Manufacturer -
-
Series RKP “S”
Diagonal Size 15" TFT 17" TFT 19" TFT 17" TFT 19" TFT
Max. Resolution 1024 x 768 1280 x 1024 1280 x 1024
1152 x 900 (Direct) 1152 x 900 (Direct)
1280 x 1024 (Native) 1280 x 1024 (Native)
Brightness (cd/m²) 250 250 250 250 250
Color Support 16.2 M 16.7 M 16.7 M 16.7 M 16.7 M
Contrast Ratio (typ.) 700:1 1000:1 1000:1 1000:1 1000:1
Viewing Angle (H/V) 160° x 130° 160˚ x 160˚ 160˚ x 160˚ 160˚ x 160˚ 160˚ x 160˚
Display Area (mm) 304 x 228 338 x 270 376 x 301 338 x 270 376 x 301
Tr Response Time (ms) 5.7 1.3 1.3 1.3 1.3
LCD Panel MTBF (hrs) 30,000 50,000 50,000 50,000 50,000
VGA Signal Input Analog RGB, 0.7Vp-p
Sync. Type Separate H/V, Composite, SOG
Resolution
640 x 400, 70 Hz -
720 x 400, 70 Hz
640 x 480, 60/ 70/ 72/ 75 Hz
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 72/ 75 Hz 1024 x 768, 60/ 70/ 75 Hz
- 1152 x 864, 60/ 70/ 75 Hz
- 1280 x 720, 60/ 70/ 75 Hz 1280 x 720, 60/ 75 Hz
- 1280 x 1024, 60/ 70/ 72/ 75 Hz 1280 x 1024, 60/ 70/ 75 Hz
- 1152 x 900, 66 /76Hz
Plug & Play DDC EDID 1.3
Console Port (Combo)
DB-15 connector for VGA / keyboard / mouse
(Combo interface)
DB-15 connector for VGA / keyboard / mouse
Support USB servers or Combo KVM switches
Power Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption Max. 48 Watt, Standby 5 Watt
Compatibility Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
Regulation Approval FCC, CE
Options
KVM Integration Matrix & combo KVM with IP console and 2-console selection
Keyboard & mouse Full size keyboard built-in touch-pad / trackball
SUN-compatible keyboard integrated with
3-button touchpad / trackball
Graphic Input DVI-D, BNC & S-Video input -
DC Power DC power input with 12V, 24V, 48V selection
Touchscreen Resistive & capacitive -
Environmental
Operation 0˚ to 50˚C Degree
Storage -5˚ to 60˚C Degree
Relative Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random vibration
P.16
3.2 Keyboard & Mouse Chapter 3
N keyboard integrated with trackball
Nb
N keyboard integrated with touchpad
Ne
For RKP-217 / 219 / 2415 / 2417 / 2419 series
Supporting layouts
3.2 Keyboard & Mouse Chapter 3
P.17
For S-217 / 219 series
NSe
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
NS keyboard integrated with touchpad
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
NS keyboard integrated with trackball
NSb
Supporting layouts
3.3 How to Use "NS" keyboard Chapter 3
Press the Fn/Num button to switch the color the Num LED.
NS SUN-compatible keyboard incorporates SUN short-cut keys.
Num LED in Off mode
Key pad behaves as a SUN Solaris system administration command mode
Num LED in Green color
Key pad behaves as a normal key pad mode
Three Audio / Display keys are located in the upper-right corner of the NS keyboard:
Audio : Mute, decrease in volume and increase in volume.
Display : Degauss, decrease contrast and increase contrast.
Please ask your supplier for full details
P.18
4.3 BNC + S-Video Option
Internal power version
External power version
Remarks:
Package includes 1 x 6ft S-Video cable
P.19
4.1 KVM Options Chapter 4
4.2 DVI-D Option
Internal power version
External power version
Remarks
Package includes 1 x 6ft DVI-D cable
The depth of RKP-2415 / 2417 / 2419 will be extended from 480mm ( “18.9” ) to 530mm ( “20.9” )
DVI-D
3-in-1 VGA KB mouse console port
3-in-1
VGA KB mouse
console port
S-Video BNC
Our KVM is designed to seamlessly integrate into the rear of our full range of LCD drawer solutions:
For KVM operation, please refer to KVM user manual
Option with Multiple consoles Matrix KVM
Option with high density & cost ef cient Combo KVM integration with either 8 / 16 / 32 ports
Option with low cost PS/2 KVM
Please ask your supplier for full KVM details
Remarks
“S” series is for Matrix & Combo KVM only.
Remarks
Audio input is 35mm audio plug
The speaker is sharing the same power with LCD.
Power Audio
Speaker
4.4 Audio Option Chapter 4
Internal power version
External power version
3-in-1
VGA KB mouse
console port
P.20
P.21
4.5 DC Power Options Chapter 4
Model 12V 24V 48V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V
Input current
- No load 50 mA 50 mA 50 mA
- Full load 4950 mA 2450 mA 1220 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A
Effi ciency 84% 85% 85%
Remarks
Package does not include power cord and AC power adapter
In RKP-2415-1601 / 2417-1601 / 2419-1601 series, the depth will be extended form 480mm ( “18.9” ) to
530mm ( “20.9” )
4.6 Touchscreen Options
Model -15TRB / -15TRS -17TRB / -17TRS -19TRB / -19TRS
Screen size 15" 17" 19"
Interface USB / serial
Optical transmittance 80% ± 3%
Surface hardness 3H (JIS K5400)
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Capacitive
Model -15TCB / -15TCS -17TCB / -17TCS -19TCB / -19TCS
Screen size 15" 17" 19"
Interface USB / serial
Optical transmittance 93% ± 2%
Surface hardness >9H Surface hardness, withstand over 300 million touches
Operating system Windows 98 / 2000 / ME / XP / NT / CE, DOS, Linux
e-Resistive
Remarks
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
Serial touchscreen package includes 1 x 6ft serial cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
Touchscreen in other brands are available on request
1. How do I adjust the resolution?
5.1 Troubleshooting Chapter 5
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
1. Is interference signal appeared on LCD normal when shutting down the computer ?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered
normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.
2. The membrane power light is not ON
Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
Check the power cord is properly connected to the LCD keyboard drawer and power outlet.
4. Is the LCD keyboard drawer hot-pluggable ?
The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers and KVMs, may
not be hot-pluggable. We suggest turning off the power to all devices before connecting them. Apply power to connected
devices again only after the LCD keyboard receives power.
3. Screen image is not centered or sized properly
Press the button for two seconds to automatically adjust the image.
Adjust the H-position and V-position settings via On-screen menu.
2. How do I adjust the resolution in MS Windows operation system?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
1. How can I adjust the monitor resolution to 1152 x 900 for SUN Micro system ?
The NS solution LCD keyboard drawer will automatically detect the 1152 x 900 resolution, so no user confi guration should
be necessary.
3. The Stop-A hot key is not work in Trusted Solaris
The keyboard combination Stop-A (L1-A) is not available in Trusted Solaris by default. The security administrator can
change this.
For RKP-217 / 219 / 2415 / 2417 / 2419 series
For “S” series
P.22
6.1 Dimensions
Chapter 6
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
RKP-217 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-219 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
S-217 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
S-219 series
442 x 600 x 88 mm
17.4 x 23.6 x 3.5"
581 x 753 x 216 mm
22.9 x 29.6 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-2415 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5"
17 kg
37 lb
23 kg
51 lb
RKP-2417 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5"
18 kg
40 lb
24 kg
53 lb
RKP-2419 series
442 x 480 x 88 mm
17.4 x 18.9 x 3.5"
584 x 616 x 216 mm
23 x 24.3 x 8.5”
18 kg
40 lb
24 kg
53 lb
Copyright 2011 Rackmount-Solutions-Pro.com. All rights reserved.
All brand names, logo and registered trademarks are properties of their respective owners.
Loading...