Page 1
TECHNICAL SPECIFICATION
Brocade ICX 7450 Switch Technical
Specifications
53-1003483-06
08 April 2016
Page 2
©
2016, Brocade Communications Systems, Inc. All Rights Reserved.
Brocade, Brocade Assurance, the B-wing symbol, ClearLink, DCX, Fabric OS, HyperEdge, ICX, MLX, MyBrocade, OpenScript, VCS, VDX, Vplane, and
Vyatta are registered trademarks, and Fabric Vision is a trademark of Brocade Communications Systems, Inc., in the United States and/or in other
countries. Other brands, products, or service names mentioned may be trademarks of others.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any equipment,
equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document at any time, without
notice, and assumes no responsibility for its use. This informational document describes features that may not be currently available. Contact a Brocade
sales office for information on feature and product availability. Export of technical data contained in this document may require an export license from the
United States government.
The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the accuracy of this
document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that accompany it.
The product described by this document may contain open source software covered by the GNU General Public License or other open source license
agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and
obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.
2 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 3
Contents
Brocade ICX 7450 Switch Technical Specifications...........................................................................................................................................................................................5
System specifications.................................................................................................................................................................................................................................................5
Ethernet.............................................................................................................................................................................................................................................................................. 5
LEDs.....................................................................................................................................................................................................................................................................................6
Other.................................................................................................................................................................................................................................................................................... 6
Weight and physical dimensions......................................................................................................................................................................................................................... 6
Environmental requirements...................................................................................................................................................................................................................................7
Power supply specifications (per PSU).............................................................................................................................................................................................................7
Power consumption (typical configuration)....................................................................................................................................................................................................8
Power consumption (maximum configuration)........................................................................................................................................................................................... 8
Power consumption (modules).............................................................................................................................................................................................................................9
Data port specifications (Ethernet).................................................................................................................................................................................................................... 10
Serial port specifications (pinout mini-USB)................................................................................................................................................................................................. 11
Serial port specifications (pinout RJ-45)......................................................................................................................................................................................................... 11
Serial port specifications (protocol).....................................................................................................................................................................................................................11
Memory specifications............................................................................................................................................................................................................................................. 12
Regulatory compliance (EMC).............................................................................................................................................................................................................................12
Regulatory compliance (safety)........................................................................................................................................................................................................................... 12
Regulatory compliance (environmental).........................................................................................................................................................................................................12
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 3
Page 4
4 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 5
Brocade ICX 7450 Switch Technical Specifications
This document highlights the features and specifications for the Brocade ICX 7450 Switch.
System specifications
System component Description
Enclosure Stackable up to 12 switches per stack, chassis-mountable in a standard 2 or 4-post rack
Power supplies Dual redundant, hot-swappable power supplies supported with 250 W AC intake or exhaust airflow for non-PoE
switches, and 1000 W AC with intake or exhaust airflow for PoE switches. Shipping bundle has one power supply
and one fan unit.
Fans One dual redundant, hot-swappable fan unit with intake or exhaust airflow
Cooling Forced-air cooling; front-to-back or back-to-front
System architecture Nonblocking shared memory switch
ICX 7450-24: 24 1-GbE RJ-45 ports, four 10-GbE SFP+ Uplink/Stacking ports, two 40-GbE QSFP+ stacking
ports, one power supply, and one fan unit
ICX 7450-24P: 24 1-GbE RJ-45 ports (supporting PoE, PoE+, High PoE, PoH), four 10-GbE SFP+ Uplink/
Stacking ports, two 40-GbE QSFP+ stacking ports, one power supply, and one fan unit
ICX7450-32ZP: 24 1-GbE RJ-45 ports, 8 2.5-GbE RJ-45 ports (supporting PoE, PoE+, High PoE, PoH), four
10-GbE SFP+ Uplink/Stacking ports, two 40-GbE QSFP+ stacking ports, one power supply, and one fan unit.
ICX 7450-48: 48 1-GbE RJ-45 ports, four 10-GbE SFP+ Uplink/Stacking ports, two 40-GbE QSFP+ stacking
ports, one power supply, and one fan unit
ICX 7450-48P: 48 1-GbE RJ-45 ports (supporting PoE, PoE+, High PoE, PoH), four 10-GbE SFP+ Uplink/
Stacking ports, two 40-GbE QSFP+ stacking ports, one power supply, and one fan unit.
ICX 7450-48F: Eight 1-GbE SFP ports, four 10-GbE SFP+ Uplink/Stacking ports, two 40-GbE QSFP+ stacking
ports, one power supply, and one fan unit
System processors BCM56548 with dual-core ARM Cortex A9 processor running at 1 GHz
Ethernet
These are standard modules for shipping bundles. For ICX 7450-24/24P/32ZP/48/48P/48F non-bundled switches, expansion
modules need to be ordered separately.
System component Description Maximum ports supported
40 GbE QSFP+ ports One 40-GbE QSFP+ stacking or uplink port 3 (slot 2-4) for ICX 7450-24/24P
2 (slot 3-4) for ICX 7450-48/48P/48F/32ZP
10 GbE SFP+ ports Four 10-GbE SFP+ uplink or stacking ports 12 (slot 2-4)
10 GbE copper ports
(optional modules)
1 GbE SFP ports (optional
modules)
1 GbE RJ-45 front panel
ports
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 5
Four 10G RJ-45 uplink ports 12 (slot 2-4)
Four 1G SFP uplink ports 4 (slot 2)
24 1-GbE RJ-45 ports for ICX 7450-24/24P 24/48 (slot 1)
Page 6
Brocade ICX 7450 Switch Technical Specifications
System component Description Maximum ports supported
48 1-GbE RJ-45 ports for ICX 7450-48/48P
1 GbE SFP front panel ports 48 1-GbE SFP for ICX 7450-48F 48 (slot 1)
Ethernet management port One RJ-45 port with 10/100/1000 Mbps auto-negotiating
capability
N/A
LEDs
System component Description
Switch status and management Five LED states to indicate switch status (green and amber)
Three LED states to indicate power supply status (green and amber)
Four LED states for diagnostics (green and amber)
Six LED states to indicate stacking-relates status (green and amber)
Five LED states to indicate module and module power status (green and amber)
Ports 28 LED states to indicate the port status (green and amber)
Other
System component Description
Serial cable Mini-USB to RJ-45
RJ-45 to DB9 adapter 1
AC power cord, power clip For ICX 7450-24-E, 24P-E, 32-ZP, 48-E, 48P-E and 48F-E units
Weight and physical dimensions
With one power supply, one fan assembly, two stacking modules, and one 10-GbE media module.
Model Height Width Depth Weight (with basic
modules)
ICX 7450-24 4.37 cm
1.72 inches
ICX 7450-24P 4.37 cm
1.72 inches
ICX 7450-32ZP 4.37 cm
1.72 inches
ICX 7450-48 4.37 cm
1.72 inches
ICX 7450-48P 4.37 cm
1.72 inches
ICX 7450-48F 4.37 cm
1.72 inches
40.00 cm
17.32 inches
40.00 cm
17.32 inches
40.00 cm
17.32 inches
40.00 cm
17.32 inches
40.00 cm
17.32 inches
40.00 cm
17.32 inches
39.37 cm
15.50 inches
39.37 cm
15.50 inches
39.37 cm
15.50 inches
39.37 cm
15.50 inches
39.37 cm
15.50 inches
39.37 cm
15.50 inches
6.40 kg
14.11 lb
6.90 kg
15.21 lb
7.14 kg
16.05 lb
6.50 kg
14.33 lb
7.10 kg
15.65 lb
6.80 kg
14.99 lb
Fully loaded weight (no
transceivers)
8.57 kg
18.89 lb
9.02 kg
19.89 lb
8.91 kg
19.69 lb
8.74 kg
19.2 lb
9.21 kg
20.30 lb
8.94 kg
19.71 lb
6 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 7
Brocade ICX 7450 Switch Technical Specifications
Environmental requirements
Condition Operational Non-operational
Ambient temperature -5°C to 50°C (23°F to 122°F)
NOTE
Maximum operation temperature of 50 °C
applies to sea level and decreases by 1°C
for every 1000 feet altitude increase per
NEBS rule. If Back-to-Front air flow is
chosen and only a single fan is in service,
maximum operation temperature
decreases by 5°C.
-40°C to 70°C (-40°F to 158°F)
Relative humidity (noncondensing)
Altitude (above sea level) 0 to 3,048m (10,000 ft) 0 to 12,000 m (39,370 ft)
Shock 20 G, 11 ms, half-sine wave 33 G, 11 ms, half-sine wave
Vibration 1 G sine, 0.4 grms random, 5-500 Hz 2.4 G sine, 1.1 grms random, 5-500 Hz
Airflow Nominal: 5-7 cfm; Maximum: 17-20 cfm N/A
Heat dissipation (+/- 5%)
10% to 90% at 50°C (122°F) 5% to 95% at 70°C (158°F)
NOTE
N/A
Refer to “Power consumption (typical
configuration)” and “Power consumption
(maximum configuration)” for detailed
information on heat dissipation.
Operating noise ICX 7450-24-E: 46 dBA
ICX 7450-24P-E: 49 dBA
ICX 7450-32ZP: unknown dBA
ICX 7450-48-E: 47 dBA
ICX 7450-48P-E 49 dBA
ICX 7450-48F-E: 46 dBA
MTBF @ 25°C ICX 7450-24-E: 399,973 Hours
ICX 7450-24P-E: 317,719 Hours
ICX 7450-32ZP: unknown Hours
ICX 7450-48-E: 376,635 Hours
ICX 7450-48P-E: 297,862 Hours
ICX 7450-48F-E: 330,154 Hours
N/A
N/A
Power supply specifications (per PSU)
Power supply
model
AC RPS15-E 250 W 100-240 VAC 50-60Hz 4 A Fuses 35 A
AC RPS15-I 250 W 100-240 VAC 50-60Hz 4 A Fuses 35 A
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 7
Maximum output
power rating (DC)
Input voltage Input line
frequency
Maximum input
current
Input line
protection
Maximum inrush
current
Page 8
Brocade ICX 7450 Switch Technical Specifications
Power supply
model
AC RPS16-E 1000 W 100-240 VAC 50-60Hz 11.8 A Fuses 35 A
AC RPS16-I 1000 W 100-240 VAC 50-60Hz 11.8 A Fuses 35 A
Maximum output
power rating (DC)
Input voltage Input line
frequency
Maximum input
current
Input line
protection
Maximum inrush
current
Power consumption (typical configuration)
All 1-Gbps and two 10-Gbps ports are linked up, loading with 10% traffic rate, and no PoE load. Two fan FRUs, 4x10GC ports are linked
up, and no stacking module. Fans at nominal speed.
ICX7450-32ZP: 24 1-Gbps ports and eight 2.5-Gbps ports. Slot1: Empty, Slot2: 4x10GF, Slot3: 4x10GF ports are linked UP, loading with
10% traffic rate. Two fans at nominal speed.
Model name (Input
power +/- 5 %)
ICX 7450-24 88.5 W
ICX 7450-24P 95.3 W
ICX 7450-32ZP 120.46 W
ICX 7450-48 117.6 W
ICX 7450-48P 129.7 W
ICX 7450-48F 141.4 W
@100 VAC input @200 VAC input @-48 VDC Minimum number of
power supplies
302 BTU/hr
100.1 W
342 BTU/hr
325 BTU/hr
112.9 W
386 BTU/hr
411.14 BTU/hr
130.57 W
445.65 BTU/hr
402 BTU/hr
129.4 W
451 BTU/hr
443 BTU/hr
128.2 W
438 BTU/hr
420 BTU/hr
152.8 W
522 BTU/hr
87.6 W
299 BTU/hr
99.2 W
339 BTU/hr
94.1 W
321 BTU/hr
111.7 W
381 BTU/hr
118.59 W
404.76 BTU/hr
128.32 W
437.97 BTU/hr
115.9 W
442 BTU/hr
128.4 W
438 BTU/hr
143 W
488 BTU/hr
141.1 W
482 BTU/hr
139.6 W
477 BTU/hr
151.6 W
518 BTU/hr
80.6 W
276 BTU/hr
85.3 W
291 BTU/hr
82.6 W
282 BTU/hr
87.58 W
291 BTU/hr
105.27 W
359.29 BTU/hr
109.31 W
373.08 BTU/hr
107.6 W
367 BTU/hr
115.94 W
396 BTU/hr
115.1 W
393 BTU/hr
118.82 W
406 BTU/hr
129.2 W
441 BTU/hr
132.78 W
474 BTU/hr
1 x 250 W AC
1 x 510 W DC
1 x 250 W AC
1 x 510 W DC
1 x 1000 W AC
1 x 510 W DC
1 x 1000 W AC
1 x 510 W DC
118.59 W
404.76 BTU/hr
132.71 W
452.95 BTU/hr
1 x 250 W AC
1 x 510 W DC
1 x 250 W AC
1 x 510 W DC
1 x 1000 W AC
1 x 510 W DC
1 x 1000 W AC
1 x 510 W DC
1 x 250 W AC
1 x 510 W DC
1 x 250 W AC
1 x 510 W DC
Notes
1 PSU
2 PSUs
1 PSU,
no PoE load
2 PSUs,
no PoE load
110.4 W
376.8 BTU/hr
114.31 W
390.15 BTU/hr
1 PSU
2 PSUs
1 PSU,
no PoE load
2 PSUs,
no PoE load
1 PSU
2 PSUs
Power consumption (maximum configuration)
All 1-Gbps and two 10-Gbps ports are linked up, loading with 100% traffic rate, and 100% PoE load. Two fan FRUs, 4x10GC ports are
linked up, and no stacking module. Fans at high speed.
8 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 9
Brocade ICX 7450 Switch Technical Specifications
ICX7450-32ZP: 24 1-Gbps ports and eight 2.5Gbps ports. Slot1: Empty, Slot2: 4x10GF, Slot3: 4x10GF are linked UP, 100% traffic and
PoE load.
Model name (Input
power +/- 5 %)
ICX 7450-24 119.7 W
ICX 7450-24P 947 W
ICX 7450-32ZP 167.1 W
ICX 7450-48 154.4 W
ICX 7450-48P 998 W
ICX 7450-48F 178.3 W
@100 VAC input @200 VAC input @-48 VDC Minimum number of
409 BTU/hr
134.9 W
461 BTU/hr
3232 BTU/hr
1402 W
4785 BTU/hr
570.33 BTU/hr
1853.08 W
6324.71 BTU/hr
527 BTU/hr
168.8 W
576 BTU/hr
3406 BTU/hr
1809 W
6174 BTU/hr
609 BTU/hr
196.4 W
670 BTU/hr
118.5 W
405 BTU/hr
133 W
454 BTU/hr
919 W
3137 BTU/hr
1374 W
4690 BTU/hr
164.06 W
559.95 BTU/hr
1763.55 W
6019.14 BTU/hr
151.8 W
518 BTU/hr
167.4 W
572 BTU/hr
958 W
3270 BTU/hr
1769 W
6038 BTU/hr
175.7 W
606 BTU/hr
194.1 W
663 BTU/hr
113.8 W
388 BTU/hr
125.24 W
428 BTU/hr
387.2 W
1322 BTU/hr
669.06 W
2284 BTU/hr
145.98 W
498.24 BTU/hr
698.79 W
2385.03 BTU/hr
146.1 W
499 BTU/hr
156.68 W
535 BTU/hr
421.4 W
1438 BTU/hr
704.12 W
2403 BTU/hr
167.1 W
570 BTU/hr
177.64 W
606 BTU/hr
power supplies
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
2 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
2 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 1000 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
1 x 250 W AC
1 x 510 W DC or 2 x
510 W DC
Notes
1 PSU
2 PSUs
1 PSU
2 PSUs required for
PoE loading
1 PSU
2 PSUs required for
PoE loading
1 PSU
2 PSUs
1 PSU
2 PSUs required for
PoE loading
1 PSU
2 PSUs
Power consumption (modules)
Module name Module description Power consumption
ICX7400-4X1GF 4-port 1 GbE SFP expansion module Typical = 5.40 W
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 9
Page 10
Brocade ICX 7450 Switch Technical Specifications
Module name Module description Power consumption
Maximum = 5.76 W
ICX7400-4X10GF 4-port 1/10 GbE SFP+ expansion module Typical = 12.96 W
Maximum = 15.72 W
ICX7400-4X10GC 4-port 1/10 GbE copper expansion module Typical = 18.72 W
Maximum = 20.76 W
ICX7400-1X40GQ 1-port 40 GbE QSFP+ data uplink/stacking module Typical = 5.64 W
Maximum = 7.38 W
ICX-FAN10-E Power supply exhaust airflow fan (two fans required if two power supplies
are used)
ICX-FAN10-I Power supply intake airflow fan (two fans required if two power supplies
are used)
Typical = 4.68 W
Maximum = 16.68 W
Typical = 4.68 W
Maximum = 16.68 W
Data port specifications (Ethernet)
This table lists the ports for switch bundles. Other port combinations can be used for non-bundled switches. All the switches also
support 10/100M on 1GbE ports. -32ZP supports 100M at 2.5 GbE ports.
Model Port type Number (in
module)
ICX 7450-24 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
1 GbE 24 (slot 1) RJ-45 ports
ICX 7450-24P 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
1 GbE 24 (slot 1) RJ-45 ports with PoE support
ICX 7450-32ZP 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
2.5 GbE 8 (slot 1) RJ-45 ports with PoE support
1 GbE 24 (slot 1) RJ-45 ports with PoE support
ICX 7450-48 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
Description
QSFP+ stacking ports, compatible with LR4 or SR4 optical transceivers, or direct
attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
QSFP+ stacking ports, 40 Gbps, compatible with LR4 or SR4 optical transceivers, or
direct attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
QSFP+ stacking ports, 40 Gbps, compatible with LR4 or SR4 optical transceivers, or
direct attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
QSFP+ stacking ports, compatible with LR4 or SR4 optical transceivers, or direct
attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
10 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 11
Brocade ICX 7450 Switch Technical Specifications
Model Port type Number (in
module)
1 GbE 48 (slot 1) RJ-45 ports
ICX 7450-48P 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
1 GbE 48 (slot 1) RJ-45 ports with PoE support
ICX 7450-48-F 40 GbE 2
(ICX7400-1X40G
Q)
10 GbE 4
(ICX7400-4X10G
C)
1 GbE 48 (slot 1) SFP ports, compatible with 100Base-FX IR or LR SFP optic for SMF, 100Base-FX
Description
QSFP+ stacking ports, compatible with LR4 or SR4 optical transceivers, or direct
attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
QSFP+ stacking ports, compatible with LR4 or SR4 optical transceivers, or direct
attached copper cable
SFP+ uplink ports, compatible with ER, LR, LRM, SR, ZR or USR optical transceivers
SFP optic MMF, 1000Base-BXD SFP optic SMF, 1000Base-BXU SFP optic SMF,
1000Base-LHA SFP optic SMF, 1000Base-LX SFP optic SMF, 1000Base-SX SFP
optic MMF, 1000BASE-TX SFP Copper
Serial port specifications (pinout mini-USB)
Pin Signal Description
1 Reserved Not used
2 UART0_TX Debug port (data transmitted by ICX)
3 UART0_RX Console port (data received by ICX)
4 Reserved Not used
5 GND Ground
Serial port specifications (pinout RJ-45)
Pin Signal Description
1 Not supported N/A
2 Not supported N/A
3 UART1_TXD Transmit data to ICX
4 GND Logic ground
5 Not supported N/A
6 UART1_RXD Receive data from ICX
7 Not supported N/A
8 Not supported N/A
Serial port specifications (protocol)
Parameter Value
Baud 9600
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 11
Page 12
Brocade ICX 7450 Switch Technical Specifications
Parameter Value
Data bits 8
Parity None
Stop bits 1
Flow control None
Memory specifications
Memory Type Size
Main memory DDR3 2 GB
Boot Flash NOR flash 8 MB
Compact Flash eUSB NAND flash 2 GB
eUSB Drive USB 2 GB
Regulatory compliance (EMC)
∙ FCC Part 15, Subpart B (Class A)
∙ EN 55022 (CE mark) (Class A)
∙ EN 55024 (CE mark) (Immunity) for Information Technology Equipment
∙ ICES-003 (Canada) (Class A)
∙ AS/NZ 55022 (Australia) (Class A)
∙ VCCI (Japan) (Class A)
∙ EN 61000-3-2
∙ EN 61000-3-3
∙ EN 61000-6-1
Regulatory compliance (safety)
∙ CAN/CSA-C22.2 No. 60950/UL 60950
∙ EN 60825 Safety of Laser Products
∙ EN 60950/IEC 60950 Safety of Information Technology Equipment
Regulatory compliance (environmental)
∙ 2014/35/EU and 2014/30/EU
∙ 2011/65/EU – Restriction of the use of certain hazardous substance in electrical and electronic equipment (EU RoHS)
∙ 2012/19/EU – Waste electrical and electronic equipment (EU WEEE)
∙ 94/62/EC – packaging and packaging waste (EU)
∙ 2006/66/EC – batteries and accumulators and waste batteries and accumulators (EU battery directive)
12 53-1003483-06
Brocade ICX 7450 Switch Technical Specifications
Page 13
Brocade ICX 7450 Switch Technical Specifications
∙ 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (EU REACH)
∙ Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 – U.S. Conflict Minerals
∙ 30/2011/TT-BCT – Vietnam circular
∙ SJ/T 11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in EIPs (China)
∙ SJ/T 11364-2006 Marking for the Control of Pollution Caused by EIPs (China)
Brocade ICX 7450 Switch Technical Specifications
53-1003483-06 13
Loading...