By providing your product and purchase information, we can confirm the date of purchase
to secure your warranty. This confirmation serves as security in the event that your original
proof of purchase is lost, or in case your unit needs any servicing in the future.
Your model number, serial number, and other information will be kept in our files.
Please complete and return this registration within 30 days from purchase in order to receive
our 5 Year Limited Warranty.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
01
02
General Safety Instructions
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
To reduce the risk of electric
shock, do not touch the
RabbitAir MinusA2
™
Air Purifier
or its power plug with wet
hands.
Do not unplug the RabbitAir
MinusA2
™
Air Purifier by pulling
its power cord. Remove the
power plug from its outlet by
grasping the plug itself and
pulling gently.
Do not operate RabbitAir MinusA2
™
Air Purifier if the plug or cord appears
damaged or is damaged. Return the
unit to authorized service facility for
examination and repair.
Do not repeatedly plug in and
out the RabbitAir MinusA2
™
Air
Purifier.
Always unplug the RabbitAir MinusA2
™
Air Purifier from power outlet when not
in use and before servicing or cleaning
the unit.
The RabbitAir MinusA2™Air Purifier is for indoor use only.
Any attempts to open or repair the
RabbitAir MinusA2
™
Air Purifier
without written permission from
Rabbit Air will void the warranty and
could cause serious personal injury
to the user and/or result in severe
damage to the unit.
Use only as directed by the RabbitAir MinusA2™Air Purifier user's guide.
To reduce the risk of electric shock, do not attempt to service the product
in any way other than in the manner described in this user's guide.
Read all instructions before using the RabbitAir MinusA2™Air Purifier.
RabbitAir MinusA2™Air Purifier operates at 120V AC and 60Hz only.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
03
04
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
To reduce the risk of electric shock, the RabbitAir MinusA2™Air Purifier
has a polarized plug. There is only one way for the plug to fit into a
polarized outlet. If the plug does not fit into the outlet, reverse the plug. If
it still does not fit, contact qualified personnel to install the proper outlet.
Do not alter the plug in any way.
Always keep the plug clean. Do NOT use Benzene or gasoline to clean
the plug.
Do not use the power cord to lift,
pull, carry or drag the RabbitAir
MinusA2
™
Air Purifier. Avoid
pulling the power cord against or
around sharp corners or edges.
Always unplug the RabbitAir
MinusA2
™
Air Purifier before
cleaning it.
General Safety Instructions
Installation Guidelines
The RabbitAir MinusA2™Air
Purifier is not intended for use in
bathrooms, laundry areas and
other damp indoor environments.
Keep the Air Purifier away from
water at all times. Never place the
unit anywhere near bathtubs or
sinks.
Do not place heavy objects on top
of power cord.
Do not place the RabbitAir
MinusA2
™
Air Purifier on top of
ANY electrical appliances.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
05
06
Installation Guidelines
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Cautions Concerning the Operation of RabbitAir
MinusA2
™
Air Purifier.
Do not expose the RabbitAir
MinusA2
™
Air Purifier to direct
sunlight. Avoid leaving the
remote control in direct sunlight.
Heat may interfere with remote
control signals.
Do not install the RabbitAir
MinusA2
™
Air Purifier in
places that tend to produce oily
residue such as kitchens.
Leave at least 2 inches of space
between the wall and the
RabbitAir MinusA2
™
Air Purifier.
Leave at least 2 feet of space
between the ceiling and the
RabbitAir MinusA2
™
Air Purifier.
Place the unit on a level area.
Do not apply force to the unit.
Do not use the unit on its side.
Do not block the intake and air
outlet.
Unplug the RabbitAir MinusA2
™
Air Purifier immediately if it makes
a strange noise or produces an
odd smell.
Contact Rabbit Air for assistance.
Do not use the unit where it may
come into contact with steam.
Do not use the unit on or around hot
objects such stoves and heating vents.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
07
08
SAFETY INSTRUCTIONS
WARNING: When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
Do not use the RabbitAir MinusA2™Air
Purifier near fireplaces or in areas where
flammable or combustible products or
vapors may be present.
Do not use detergent or soap to clean
the unit.
When the RabbitAir MinusA2™Air
Purifier is turned on, do not put
anything in the opening of the unit.
Keep your body parts, hair, jewelry,
or any parts of your clothing away
from the opening.
Please observe extreme caution when
the RabbitAir MinusA2
™
Air Purifier is
used by or near children.
Do not insert fingers or foreign objects
into the particle sensor.
Do not operate the unit without the filters. Do not wash & reuse any
filters except for the electrostatic pre-filter. When transporting the unit,
always hold the handle on the back of the unit.
Cautions Concerning the Operation of RabbitAir
MinusA2
™
Air Purifier.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
09
10
FEATURES
Excellent Air Purification
6-Stages of air purification. RabbitAir
MinusA2
™
Air Purifier is effective against
allergens, mold, bacteria & viruses.
Pollen Mode
Pollen Mode is designed for optimal indoor air
circulation and the rapid removal of pollutants.
Specially designed for people who are
sensitive to allergy triggers such as pollen,
dust and other allergens in the air. Particularly
effective when high levels of pollen are
present, such as in the springtime.
Wall-Mountable Design (Optional)
The RabbitAir MinusA2
™
Air Purifier is wall-
mountable.
Silent Mode
A light sensor on the unit detects when your
house is dark and automatically switches into
Silent (Sleep) Mode.
Safety Design
For safety purposes, the unit automatically
switches off when the font panel is removed.
Mood Light
Mood Light helps to normalize blood
pressure, pulse, and faciliate deep
breathing, which puts a person in a state
of long-lasting calm & relaxation.
Quiet Mode
To reduce noise level, the fan functions at its
lowest speed in Quiet Mode.
Strong Deodorization
Charcoal based Activated Carbon Filters
capture airborne chemicals, VOCs (Volatile
Organic Compounds) and odors. VOCs are
often generated by off-gassing from carpets,
composite wood, furniture and other materials
in the home.
Negative Ion Generation
RabbitAir MinusA2
™
Air Purifier produces
millions of healthy "negative ions," present in
natural environments such as forests and
mountains, to improve and freshen the air you
breathe.
Auto Mode Operation
In Auto Mode, the speed of the fan
automatically changes to a higher speed when
the particle sensor detects impurities in the air.
Remote Control
Using this sleek remote control, you can
conveniently manage the air purifier from
wherever you are in the house.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
11
12
PART NAMES
Front View of Air Purifier Back View of Air Purifier
Remote control
Control Panel/
Display Panel
▶
Mood Light
▶
Light Sensor
▶
Particle Sensor
▶
Air Quality Indicator
▶
Power cord
▶
Unit Hanger
▶
Ventilation
Grille
▶
Handle
▶
Battery (AAA size)
Power
▶
Mood Light
▶
Speed
▶
Mode
▶
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
13
14
OPERATION PART INDICATION PART
Power
Press and hold the power button for 2
seconds to turn off the unit.
Speed
There are five speeds. Operation speed
changes in the following order as you press
the speed button.
Silent > Low > Medium > High > Turbo
Mode
There are three operation modes. The mode
changes in the following order as you press
the mode button: Auto >Quiet >Pollen
Mood Light
The color of the Mood Light on the front panel
changes according to the mode of operation.
Fan Speed Indicator
Indicates the fan speed of the Air
Purifier.
The lowest speed is Silent.
The highest speed is Turbo.
When Auto Mode is selected, the
fan speed of the air purifier changes
automatically depending on the
amount of impurities in the air as
detected by the particle sensors and
the mood light turns blue.
Quiet Mode Indicator
When Quiet Mode is selected, the
fan speed of the air purifier
automatically switches to the
lowest setting and the Mood Light
turns purple.
This indicates that the unit is
operating in the silent mode.
Pollen Mode Indicator
When Pollen Mode is selected,
the fan speed of the air purifier
changes fan speeds (silent>low>
medium>high) every 70 seconds,
while the mood light changes in
the following pattern blue>
purple>light purple>pink every
second.
Air Quality Indicator
This indicates the current level of air
quality in the room. The colors
representing the air quality level are
blue>purple>light purple>red.
Blue represents good air quality,
while red represents poor air quality.
Mood Light
The Mood Light has four colors: blue,
purple, light purple and pink.
POLLEN
QUIET
POLLEN
QUIET
Auto Mode indicator
Sleep Mode Indicator
When the Brightness Indicator and the
Sleep Mode are both on, the Mood
Light turns off automatically.
When the Brightness Indicator is off
and the Sleep Mode is on, the Mood
Light shines half as bright.
Brightness Indicator
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
15
16
NAMES OF INTERNAL FILTERS
The Nano-Silver Pre-Filter destroys germs and collects pet hair, large
allergens and dust.
▶
The anti-bacterial Medium Filter traps particles, mold, and bacteria
larger than 1㎛. It also extends the lifespan of the HEPA Filter.
▶
“Next Generation” HEPA Filter made from bio-engineered fiber traps
and destroys the allergens such as pet dander, dust mite and pollen
which accumulate on the filter.
▶
There are three customized filters designed for specific needs.
·Toxin Absorber - eliminates toxic formaldehyde & offgassing from
materials such as new furniture, carpet & paint.
·Germ Defense - protects against germs, mold, and bacteria such
as Legionella.
·Pet Allergy- traps pet dander, destroys influenza virus & bacteria.
▶
The Charcoal-based Activated Carbon Filter efficiently removes
VOC’s, common household odors and chemicals.
▶
The air purifier produces millions of healthy "negative ions" to improve
the air you breathe and freshen your indoor environment through the
use of an ion generator inside of the unit.
▶
●
Nano-Silver Pre-Filter
The filter case is designed to hold the Nano-Silver Pre-Filter, Medium
Filter, BioGS
TM
HEPA Filter, Customized Filter and Charcoal-based
Activated Carbon Filter.
▶
●
Filter Case
●
Anti-Bacterial Medium Filter
●
BioGS™HEPA Filter
●
Customized Filters
●
Charcoal Based Activated Carbon Filter
●
Negative Ions
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
17
18
PREPARATIONS
OPERATION
Plug the unit into a 110/120V outlet.
❶
Press the power button, the air
purifier is now in auto mode.
❷
RabbitAir MinusA2™Air Purifier
is designed for residential use only.
Lock the filter case in place on the unit.
Attach the Pre - Filter to the filter case by aligning the filter with the hooks of the case.
The non-woven fabric of the Customized Filter should face the front of the unit.
This unit is designed for residential use only.
To maintain the quality of the filters, they are packaged in plastic.
Please remove the filters from the plastic bags before using the unit.
Auto Mode Operation
Press the power button, the auto mode would turn on and mood light turns blue.
To remove the filter case, pull the
bottom of the front panel and lift.
Then take out the filter case.
❶
Remove the packing materials from
the filters and reload the filters in the
following order:
Nano-Silver Pre-Filter, Medium Filter,
BioGS
™
HEPA filter, Customized Filter
and Charcoal
AC Filter.
❷
To place filter case back into the unit, lock
the bottom of the filter case into the unit
first and then the top. Finally, place the
❸
The Air Quality Indicator changes
based on the amount of impurities in
the air and the fan speed adjusts
accordingly.
❸
front panel
back to the
unit with the
top first.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
19
20
OPERATION
Plug the unit into a 110/120V outlet.
❶
Press the power button, the air purifier
should be in auto mode the first time
it’s plugged in.
❷
Press the speed button to change the
speed. The speed will not change until
you adjust it.
❸
Press the button to select the speed.
There are five speeds to choose from,
Silent, Low, Medium, High and Turbo.
❹
Manual Operation
To operate the unit manually, press the speed button after turning on the unit.
Mode Operation
After turning on the unit, press the mode button
Plug the unit into a 110/120V outlet.
❶
Press the power button to turn on
the unit. The unit stays in the same
mode it was in the last time the unit
was turned off.
❷
The 3 modes of operation are:
Pollen, Quiet and Auto.
❸
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
21
22
OPERATION
Light sensor detects the brightness of
the surrounding room. Unit automatically
switches to Silent Mode three minutes
after darkness is detected.
●
How Does Sleep Mode Work? How Do I Change the Particle Sensitivity Level?
Press and hold both the speed and
mode button for 3 seconds.
●
You may need to adjust the sensitivity level if the air quality indicator is BLUE
(good air quality) when the air in the room does not seem good or RED (bad air
quality) even after 2 hours of operation.
When the Silent Mode is turned on, the fan speed of the Air Purifier
automatically changes to lowest, which minimizes the energy
consumption and noise level.
The Air Quality Indicator and Auto Mode
Indicator will blink.
●
Press and hold the speed button to
choose the sensitivity level.
●
Press and hold the speed and mode
button for 3 seconds to save the
sensitivity level. If no action is taken for
10 seconds, the sensitivity level saves
itself automatically.
●
In order to operate in Silent Mode, the
Unit must be switched to Auto or Quiet
Mode.
●
Sleep Mode Indicator turns on in Silent
Mode, which automatically switches off
Mood Light and Air Quality Indicator.
●
Pollen : Low
Quiet : Standard (Default)
Auto : High
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
23
24
OPERATION CLEANING and MAINTENANCE
Always unplug the unit before cleaning.
Cleaning the Particle Sensor
Cleaning the Air Intake and Outlet
Clean the air intake and outlet with
a soft brush.
●
Cleaning the Negative Ion Generator
Use a dry cotton swab to remove
dust on the plate.
●
The mood light turns on automatically
when the unit is turned on. Press the
mood light button to turn on/off the
mood light.
●
Mood Light
Mood light not only changes colors, but it also indicates the current
operation mode.
Press and hold the Mood Light button for 2 seconds, the Brightness Indicator
turns on and the Mood Light turns off.
●
The color of the Mood Light changes according to
different mode.
●
Pollen : Blue-Purple-Light Purple-Pink.
Auto: Blue Quiet : Purple
※ The mood light darkens when the Silent Mode turns on.
Press and hold the
Mood Light for 2
seconds.
The Brightness
Indicator goes on.
Sleep Mode turns
on.
The Mood Light
automatically turns off.
Press and hold the
Mood Light for 2
seconds.
The Brightness
Indicator turns off.
Sleep Mode
operation
The brightness of the
Mood Light reduces
by half.
→ Press the mood light button for 2 seconds, the Indicator turns off and the Silent Mode resumes.
Be careful not to drop the cotton swab
into the unit.
Be careful not to drop the brush into
the unit.
Cleaning the Front Panel
Remove the front panel from the
unit and use a dry cloth or soft
brush to dust it off.
●
Use a wet cloth if necessary but do
not use a polisher.
Open the particle sensor cover on the right side of
the unit (when facing the
unit). Use a wet cotton
swab to clean and dry
the lens, dust inlet and
dust outlet.
●
Recommend cleaning particle sensor every
3 to 6 month.
●
Clean the air inlet and outlet using a vacuum
cleaner or soft brush.
●
outlet air inlet
dust outlet
dust inlet
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
25
26
CLEANING and MAINTENANCE FILTER REPLACEMENT
Cleaning the Lens on the Back of the Front Panel
Cleaning the Unit
Use a dry and soft cloth to clean the unit.
●
Remove the front panel from the unit and use
a dry cloth, soft brush, or cotton swab to dust
off the mood light on the back of the panel.
●
Use a wet cloth if necessary but do not use a
polisher.
Use a wet cloth if necessary but do not use
a polisher.
Cleaning the Nano-Silver Pre-Filter
Pull the bottom of the front panel to
remove it from the unit.
❶
Pull the filter out as shown on the
picture at the right.
❷
Run a vacuum cleaner with a nozzle or
brush attachment on low power
setting along the Pre-Filter to pick up
the dust and particles.
❸
Dry the filter completely before attaching
it to the filter case. Load the case onto
the unit again.
❹
Replacing the Medium Filter (Every 12 Months)
Remove the filter from the filter case.
Do NOT discard the filter holder.
❶
To replace the medium filter, remove the
new filter from the plastic bag, attach it to
the filter holder,and
place it back into
the filter case.
❷
Always unplug the unit before cleaning/replacing the filters.
Depending on the amount of pollutants in your indoor environment, the frequency
of replacing the filter varies.
When placing the filter case back into unit, make sure the bottom of the case goes
into the unit first, and then follows the top.
Replacing the BioGS™HEPA Filter (Every 12 Months)
Remove the front panel and then the
BioGS ™HEPA filter.
❶
Attach the pre filter to
the filter case by aligning
the filter with the hooks
of the case.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
27
28
Cleaning and replacement schedule
Identify front side of custom Filter
※ Based on 24/7 operation.
FILTER REPLACEMENT
Replacing the Customized Filter (Every 12 Months)
Remove the new Customized Filter from
the filter case. Do not discard the filter
holder. Discard the
old Customized
Filter and do not
store for re-use.
❶
Remove the Customized Filter from the
plastic bag. Attach the new Filter onto the
filter holder and place it back into the filter
case.
❷
Take out the new HEPA Filter from the
plastic bag and put it into the filter case.
❷
Replacing the Charcoal based Activated Carbon
Filter
(Every 12 Months)
Remove the old Charcoal-based Activated
Carbon Filter from the filter case. Discard the
old AC Filter and do
not store for re-use.
❶
Remove the new Charcoal-based
Activated Carbon Filter from the plastic
bag, and place the filter back into the filter
case.
❷
Every Month
Nano-Silver Pre-Filter
Not required
Customized Filter
Medium
Not required
BioGSTMHEPA
Not required
Charcoal based Activated Carbon
Permanent/Washable
Every 12 Months
Every 12 Months
Every 12 Months
Every 12 Months Not required
Filters
Replacement Cleaning
Pre-Filter (top), Medium, HEPA, Customized, and AC Filter.
Note: Place the filters in the following order
Purple Purple Purple
Toxin Absorber
Black
Germ Defense
Yellow
Pet Allergy
Orange
Front(Fabric)
Color
Back
Filter
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
29
30
TROUBLESHOOTING
Before calling for repair or replacement, or technical support, please review
the list below. The problem may not be due to unit malfunction. If your
problem is still unresolved after reviewing this guide, please call Rabbit Air
Technical Support Team.
The unit does
not operate.
Speed will not
change.
Air Quality
Indicator does
not change
when cigarette
smoke is in the
air or when the
air is highly
polluted.
Speed is
too slow.
Symptom
Check
Solution
Are the lights on display
panel off?
•
Press the power and
mode button.
Is the unit plugged in?
•
Plug the unit into a
110/120V outlet.
Is the electricity cut off?
•
Operate the unit after
electricity is resumed.
Does it continually indicate
'Very Clean'?
•
Raise the sensitivity.
(Page 22)
Is the room dark?
•
You can’t select the
speed when the silent
mode is on.
Has the auto mode been
selected?
•
You can't select the
speed when the auto
mode is set.
Is the Particle Sensor clean?
•
Clean the lens.
(Page 24)
Does it continually indicate
'Not Clean'?
•
Lower the sensitivity.
(Page 22)
Have you cleaned or replaced
the filters yet?
•
Check the cleaning and
replacement schedule.
Do not attempt to install this product if you do not understand the instructions. Contact a qualified
contractor to install the mounting brackets and call 1-888-866-8862 if you have any questions. You
risk the possibility of damaging the Air Purifier, damaging other property and personal injury if the
mounting brackets are not installed properly. Check to make sure there are no missing or defective
parts. Do not attempt to assemble the mounting brackets if there are missing or defective parts.
Contact Rabbit Air and replacement parts will be shipped to you immediately. Rabbit Air is not liable
for damage or injury caused by incorrect mounting, incorrect assembly or incorrect usage.
ㆍAfter installing the wall mount, make sure it is firmly in place before putting the air purifier on it.
ㆍThe biggest concern mounting on the wall is wiring in the wall. It’s hard to be sure, but be careful
not to drill or screw into any wiring.
Correct installation is extremely essential, and falls outside the scope of responsibility of Rabbit Air.
The fastening material provided is exclusively intended for installation on walls made of solid wood,
bricks, concrete or solidwood columns with a maximum of 3 mm wall finishing. For walls made of
other materials, for example hollow bricks, please consult your installer and/or specialist supplier.
Maximum weight of air purifier SPA-780A: 9.1 kg/20lbs.
Disclaimer for installing wall mounted object
<Installation>
Use the optional wall-mount kit to install the air purifier.
▶
Wall-Mountable (Optional)
Place the unit at some certain distance away from the
ceiling and the other walls as shown on the picture at
the right.
▶Be careful not to drop the front panel or filter case when
replacing the filters.
▶Do not pull on the power cord.
Drive in the screws of the hanger very tightly so that the unit will not fall off.
Safety Instructions
Operating Instructions Troubleshooting Tips Customer Service
01
02
31
32
SPA-780A
Rabbit Air warrants that your Air Purifier will be free from defects in material or workmanship for a
period of Five (5) years from the date of purchase. To activate the warranty, please complete and return
your warranty registration within 30 days of purchase of your Air Purifier to Rabbit Air. In order to ensure
unit performance, the filters should be replaced with original replacement filters as recommended
in this manual (the 'Limited Warranty'). Otherwise the standard warranty time in your country applies.
Within the first 30 days of purchase, Rabbit Air will replace the defective unit at no additional cost and
reimburse any shipping charges. After 30 days, Rabbit Air's obligation and liability under this Limited
Warranty is limited to repairing or replacing (at its sole discretion) the defective unit. The Limited
Warranty does not cover replacement filters.
In the event of a malfunction or failure of your Rabbit Air Air Purifier, please contact Rabbit Air to
obtain a return authorization number and the address of the service center. The return authorization
number must be clearly written on the outside of the shipping box or the shipment may be refused.
Your Limited Warranty remains in effect only if your Air Purifier:
1. Is operated in accordance with the instruction provided.
2. Is connected to a proper power supply (see voltage label on machine).
3. Three is no evidence of tampering, mishandling, neglect, accidental damage, modification,
and/or repair done to the Air Purifier by anyone other than authorized service personnel.
4. Your warranty registration has been completed and returned to Rabbit Air.
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitation of incidental or consequential damages, or limitations on how long an implied warranty
lasts, so the above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
If a problem with the product develops during the warranty period, we will repair or replace it
without charge to you. A shipping and processing fee may apply. To obtain service under
warranty, please contact Rabbit Air at 1-888-866-8862 or by email at products@RabbitAir.com
LIMITED AND EXCLUSIONS
LIMITED WARRANTY
There's odor
from the air
outlet.
Symptom
Check
Solution
Have you cleaned or replaced
the filters yet?
•
Check the cleaning and
replacement schedule.
Air Quality
Indicator
blinks.
Call Rabbit Air Technical Support Team.
•
Other problems
Unplug the unit and call Rabbit Air Technical Support Team.
•
The energy efficiency of this ENERGY STAR qualified model is measured based on a
ratio between the model’s CADR for Dust and the electrical energy it consumes, or
CADR/Watt.
The Energy Star Label and disclaimer:
Loading...