Rabbit Air SPA-421A, SPA-582A User's Guide

Rabbit Air
www.RabbitAir.com
Model No. SPA-421A and SPA-582A
TM
User's Guide
Safety Instructions
WARNING: When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
Read all instructions before using the BioGS air purifier.
TM
TM
in any way other than in the manner described in this user's guide.
Please observe extreme caution when the BioGS air purifier is used by or near children.
The BioGS air purifier is for indoor use only.
BioGS air purifier operates at 120V AC and 60Hz only.
The BioGS air purifier is not intended for use in bathrooms, laundry areas and other damp indoor environments. Keep the BioGS
TM
TM
TM TM
TM
air purifier away from water at all times. Never place the unit anywhere near bathtubs or sinks.
Do not use the BioGS air purifier near fireplaces or in areas where flammable or combustible products or vapors may be present.
Turn off the BioGS air purifier before unplugging it from power outlet.
Always unplug the BioGS air purifier from power outlet when not in use and before servicing or cleaning the unit.
To reduce the risk of electric shock, the BioGS air purifier has a polarized plug. This plug will fit in a polarized outlet only one way. If
TM
TM
TM
TM
the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
To reduce the risk of electric shock, do not touch the BioGS air purifier or its power plug with wet hands.
Always keep the BioGS air purifier cord away from heated surfaces.
Do not operate BioGS air purifier if the plug or cord appears damaged or is damaged. Return the unit to authorized service facility
TM
TM
TM
for examination and repair.
Any attempts to open or repair the BioGS air purifier without written permission from Rabbit Air will void the warranty and could
TM
cause serious personal injury to the user and/or result in severe damage to the unit.
Do not use the power cord to lift, pull, carry or drag the BioGS air purifier. Avoid pulling the power cord against or around sharp
TM
corners or edges.
Do not unplug the BioGS air purifier by pulling its power cord. Remove the power plug from its outlet by grasping the plug itself and
TM
pulling gently.
When the BioGS air purifier plugs into the power outlet, do not put any object into the openings of the unit. Also keep all fingers,
TM
body parts, hair, jewelry and loose clothing away from the openings.
1
Cautions Concering the Operation of BioGS Air Purifier
Do not block the intake and air outlet.
Do not use the unit near or on hot objects such as a stove.
Do not use the unit where it may come into contact with steam.
Do not use the unit on its side.
Do not install the unit in a location where there is heavy generation of oily residue such as kitchen.
Do not use detergent or soap to clean the unit.
Do not operate the unit without installing the filters.
Do not wash & reuse the BioGS HEPA filter.
When transporting the unit, always hold the handle on the back of the unit.
TM
TM
Remote Control Limitations
Do not use the remote control near inverter lighting equipment or electronic light fixtures.
Avoid leaving the remote control in direct sunlight. Heat may interfere with remote control signals.
Installation Guidelines
Keep a distance of at least 3 feet of space between air purifier and any equipment which involve electric wave such as televisions, radios or wave clocks.
Leave at least 2 inches of space between the wall and the BioGS air purifier.
Avoid locations where BioGS air quality sensors are exposed to direct wind.
Avoid locations where excessive dirt comes into contact with the intake or air outlet.
TM
TM
2
Part Names
Front View of Air Purifier
Air Outlet
Odor/Chemical Sensor
Detects odor such as tobacco smoke, pets, household chemicals and etc.
Back View of Air Purifier
Main Unit Display
Indicator lights and main control button for the air cleaner.
Filter Reset Button
After replacing or cleaning the filters, press the filter reset button to reset the indicators.
Dust/Particle Sensor
Detects dust, smoke, pollen, animal dander and etc.
Washable charcoal based
activated carbon filter
Absorbs and removes common household odors, VOCs, chemical smells & cigarette odor.
TM
BioGS HEPA Filter
"Next Generation" HEPA filter made of bio-engineered fiber traps and destroys the allergens such as pet dander, dust mite and pollen which accumulate on the filter.
Nano-Silver Pre-Filter
Aids in Sterilization and collects pet hair, Large size allergens and dust.
Front Panel
Slot to place remote control
Handle
Power cord
Power plug
3
Main Unit Display
Odor/Chemical Level Indicator
Indicates chemical and odor levels by changing color in five steps from light green, green, yellow, orange to red. (Light Green represents good air quality & Red represents poor air quality)
Operation Mode Indicators
Indicator lights for Auto Mode, Turbo Mode, Sleep Mode and Pollen Mode.
Timer Display Indicator
Unit will turn off automatically after pre­set time duration.
Remote Control Receiver
Remote Control Operation
Transmitter
Auto Mode Button
The fan speed of the air cleaner will change automatically depending on the amount of impurities in the air as detected by the dust and odor sensors.
Silent or Sleep Mode Button
Unit will operate at a lower fan speed and the operation is totally silent.
Timer Button
Used to set the Off Timer. The set time switches every time the button is pressed as shown below.
1 hours 2 hours
off timer
The indicator light shows the remaining time. The unit stops operating when the timer is up.
4 hours
Unit Status Indicator
Unit status indicator will stay on when the air purifier is on standby or is operating. The indicator will flash for 15 seconds when the air purifier is detecting the air quality baseline.
Main Control Button
You can change operation modes, turning the unit on and off or changing the fan speed of the unit by using this control button.
Rabbit Air
Particle/Dust Level Indicator
Indicates level of dust or particles by changing color in five steps from light green, green, yellow, orange to red. (Light Green represents good air quality & Red represents poor air quality)
Negative Ion Indicator
Unit will generate negative ion when this indicator is on.
Filter Cleaning Indicator
The filter cleaning indicator will illuminate when it is time to clean the filters and reset the indicator.
Filter Replacement Indicator
The filter replacement indicator will illuminate when it is time to replace the filters and reset the indicator.
Fan Level Indicator
Indicates the fan speed of the air purifier.
Standby Button
Pressing this button will put the unit to standby mode.
Negative Ion Mode Button
Unit will generate negative ion by pressing this button.
Turbo Mode Button
Unit will operate at the highest fan speed for 10 minutes and then changes to Auto mode.
Pollen Mode Button
This mode of operation is good for the pollen season. The unit will alternate between low and medium fan speed every 10 minutes
Fan Level Button
The fan speed can be switched between Low, Medium, High and Turbo.
4
Loading...
+ 11 hidden pages