Rabbit Air MinusA2 SPA-780N Quick Start Manual
Quick Start Guide
Do not operate the unit until completing these steps first
Initial set up for MinusA2 SPA-780N
Let’s Begin!
1. Remove the front panel by lifting
from the bottom and pulling up.
4. Remove the white Medium Filter from the black frame to discard the plastic wrapping. Return the filter to its frame.
Your customized filter will be packaged in plastic outside of the unit.
Set the filter aside for later installation (step 6).
2. Remove the filter case by grasping
the handles on either side and pulling
forward. Lay the filter case on a flat
surface.
3. Pull the tabs on the front of
the Pre-filter to remove it.
5. Remove HEPA Filter and discard plastic
wrapping.
7. Pull out the Activated Carbon Filter and discard
plastic wrapping.
Scan this QR code to watch our MinusA2 filter maintenance
video, or watch it online at: www.rabbitair.com/video
6. Remove the empty Customized Filter frame from
the case. Locate the Customized Filter set aside from
earlier and remove it from its plastic wrapping.
Insert the filter into its frame. Make sure the front of
the filter is facing up. See Customized Filter chart to
identify the front of your filter.
Next Page
24/7 customer care
For questions, call 888.866.8862 or visit us at www.rabbitair.com
Do not operate the unit until completing these steps first
8. Return the filters to the filter case in
the following order from back to front:
Activated Carbon Filter,
Customized Filter,
HEPA Filter,
Medium Filter,
Pre-filter.
(See diagram at right)
9. Return filter case to the unit. Slide
the bottom of the case back into the
unit (1), then press the top in (2).
Pre-filter tabs
Front panel
Medium Filter
Pre-filter
BioGS HEPA
Filter
Customized
Filter
Charcoal Based
Activated Carbon
Filter
Filter case
10. Reattach the front panel by latching the top
hooks, then securing the bottom of the panel.
A childproof feature pauses air purifier operation
when the front panel is removed.
Connecting to your air purier using your iPhone
1. Download the Rabbit Air app to your iPhone.
Know your Customized Filter!
BackFront
Toxin Absorber Customized Filter:
Front color: Purple
Back color: Black
Pet Allergy Customized Filter:
Front color: Purple & Orange
Back color: Orange
Germ Defense Customized Filter:
Front color: Purple & Yellow
Back color: Yellow
Odor Remover Customized Filter:
Front color: Black
Back color: Black
(thicker fabric like material)
2. Use your existing customer login or create a new account.
3. Select "Setup new purifier" or "Find existing purifier" and follow the steps on the screen.
4. Now you can monitor your air quality and control your air purifier remotely. For more information, contact us at
www.rabbitair.com/wireless.
©2018 Rabbit Air. All rights reserved. MINUSA2QSN1803
Loading...