Rabbit Air MinusA2 SPA-700A Owner's Manual
Ultra Quiet Air Purifier
Hello!
-- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- -
Warranty
SPA-700A
SPA-780A
Models:
Registration Card
Rabbit Air*
201 West Garvey Ave., Suite 102-168
Monterey Park, CA, 91754-7418
*Please do not send products or other correspondence to this address.
Owner’s
manual
ww w. ra bb it ai r. co m
fold here
Visit us at www.rabbitair.com
For Questions: Call 888.866.8862
24/7 customer care
You can also register online at www.rabbitair.com
Return this card now for:
• Product Protection
By registering your product and purchase information, we can conrm the date of
purchase to secure your warranty. This conrmation serves as security in the event that
your original proof of purchase is lost, or in case your unit needs any servicing in the future.
• Proof of Ownership
Your model number, serial number, and other information will be kept in our les. Please
complete and return this registration within 30 days from purchase in order to receive
our 5 Year Limited Warranty.
Copyright 2010 All Rights Reserved
Please fold and seal with tape before mailing. Do not staple.
General Safety Information
About Your MinusA2 Air Purifier
Electrical Safety Instructions
• Please read all tips and warnings before using the MinusA2 Air Purier.
• Use only as directed by the MinusA2 Air Purier Owner’s Manual.
• Please observe extreme caution when using the MinusA2 Air Purier in the proximity
of children.
• MinusA2 Air Puriers are for indoor use only.
• The MinusA2 Air Purier is not intended for use in bathrooms, laundry areas and other
damp indoor environments. Keep the MinusA2 Air Purier away from water at all times.
• Do not use the MinusA2 Air Purier near replaces or in areas where ammable or
combustible products or vapors may be present.
• The MinusA2 Air Purier is only designed for use in a 110/120V outlet.
• Turn off your MinusA2 Air Purier before unplugging it from the power outlet.
• Unplug the MinusA2 Air Purier from power outlet when not in use and before servicing
or cleaning the unit.
• To reduce the risk of electric shock, the MinusA2 Air Purier has a polarized plug, which
means it will t into a polarized outlet only one way. If the plug does not t into the
outlet, reverse the plug. If it still does not t, contact qualied personnel to install the
proper outlet. Do not alter the plug in any way.
• To avoid electric shock, do not touch the MinusA2 Air Purier or its power plug
with wet hands.
• Keep the MinusA2 Air Purier cord away from heated surfaces at all times.
• If cord or plug appears damaged, return the unit immediately to an authorized service
facility for examination and repair.
• Any attempts to repair the MinusA2 Air Purier without written permission from Rabbit
Air will void the warranty and could cause serious personal injury to the user and/or
result in severe damage to the unit.
• Do not pull, carry, lift, or drag the MinusA2 Air Purier by pulling its power cord. Remove
the power plug from its outlet by grasping the plug itself and pulling gently.
• When the MinusA2 Air Purier is plugged into the power outlet, keep all ngers, body
parts, hair, jewelry and loose clothing away from the openings.
Caution: When using electrical appliances, observe the following basic precautions
to reduce the risk of re, electric shock and injury to persons:
1 2
Operation Guidelines
Remote Control Tips
Installation Guidelines
• Do not block the air intake and air outlet.
• Do not use the MinusA2 Air Purier on or around hot surfaces.
• Do not use the MinusA2 Air Purier in a room where it may come into contact with steam.
• Do not operate the MinusA2 Air Purier on its side.
• Do not install the MinusA2 Air Purier in greasy or damp environments.
• Do not use detergent or soap to clean the MinusA2 Air Purier.
• Do not operate the MinusA2 Air Purier without lters.
• Do not wash and reuse the lters except for the washable Pre-lter.
• When transporting the MinusA2 Air Purier, always hold the handle on the back of the unit.
• Inverter lighting equipment or electronic light xtures may interfere with
remote control signals.
• Avoid storing the remote control in direct sunlight. Heat may interfere with
remote control signals.
• Maintain a distance of 3 ft. of space between the MinusA2 Air Purier and any
equipment that generates electromagnetic waves, such as televisions, radios, and
microwave ovens. Electromagnetic waves may interfere with the digital display
operation.
• Avoid putting the MinusA2 Air Purier in a place where the air intake or air outlet
could become clogged with dirt.
• Leave at least 2 ft. of space between the ceiling and the MinusA2 Air Purier.
3 4
Control Panel/
Display Panel
Mood Light
Light Sensor
Particle Sensor
Air Quality Indicator
Battery (AAA size)
Power
Mood Light
Speed
Mode
Power Cord
Unit Hanger
Air Outlet
Handle
Meet your MinusA2
Front view
Back view
Remote control
Odor Sensor
5 6
MODE
Filter
Reset
MOOD
LIGHT
Mode and Filter Reset
Mood Light and Negative Ion Generator
Speed
Power
Replace Filters Indicator
Pollen Mode Indicator
Fan Speed Indicator
Mood Light
Auto Mode Indicator
Sleep Mode Indicator
Ion Indicator
Air Quality Indicator
Control Panel Indicator Lights
This is a duel control button. When
mode of operation between Auto Mode
and Pollen Mode. When pressed and
held, the Replace Filters Indicator will be
reset.
turn the mood light on or o. When pressed and
held, the Negative Ion Generator will turn on or
o.
Ther e ar e
speeds. Op eration spe ed
changes in the following order as you press
the speed button.
Silent > Low > Medium > High > Turbo
Press and hold the power button for two
seconds to turn the unit on or o.
The Mood Light has four colors: blue,
purple, light purple and pink.
Turbo
High
Medium
Low
Silent
Pollen
Replace
Filters
Auto
Ion
Sleep
Air Quality
Indicator
When Pollen Mode is selected, the
r changes
automatically depending on the
readings of the air quality sensors.
The mood light shifts color in the
following pattern:
blue > purple > light purple > pink .
When this indicator lights up, it is time
When Auto Mode is selected, the
s
automatically depending on the
readings of the air quality sensors
and light sensor. The mood light is
solid blue when the unit is in Auto
Mode.
This indicates that the Negative Ion
Generator is operating.
This indicates that the unit is
operating in Sleep Mode.
This light indicates the current air
quality in the room. The colors will
shift from blue > purple > light purple
> red, depending on the amount of
contaminants. Blue represents good
air quality, while red represents poor
air quality.
7 8
Indicates the fan speed of the air
. The lowest speed is Silent.
The highest speed is Turbo.
Turbo
High
Medium
Low
Silent
Replace
Filters
Pollen
Auto
Ion
Ion
on/off
Sleep
Light Sensor
Air Quality
Indicator
Odor Sensor
Turbo
High
Medium
Low
Silent
Replace
Filters
Pollen
Auto
Ion
Ion
on/off
Sleep
Light Sensor
Air Quality
Indicator
MOOD
LIGHT
Filter
Reset
Loading...