Rabbit Air BioGP SPA-421A, BioGP SPA-582A User Manual
User's Guide
Model No. SPA-421A and SPA-582A
www.RabbitAir.com
Rabbit Air
TM
1
TM
• Read all instructions before using the BioGP air purifier.
TM
• Use only as directed by the BioGP air purifier user's guide. To reduce the risk of electric shock, do not attempt to service the product
in any way other than in the manner described in this user's guide.
TM
• Please observe extreme caution when the BioGP air purifier is used by or near children.
TM
• The BioGP air purifier is for indoor use only.
TM
• BioGP air purifier operates at 120V AC and 60Hz only.
TM
• The BioGP air purifier is not intended for use in bathrooms, laundry areas and other damp indoor environments. Keep the BioGP
air purifier away from water at all times. Never place the unit anywhere near bathtubs or sinks.
TM
• Do not use the BioGP air purifier near fireplaces or in areas where flammable or combustible products or vapors may be present.
TM
• Turn off the BioGP air purifier before unplugging it from power outlet.
TM
• Always unplug the BioGP air purifier from power outlet when not in use and before servicing or cleaning the unit.
TM
• To reduce the risk of electric shock, the BioGP air purifier has a polarized plug. This plug will fit in a polarized outlet only one way. If
the plug does not fit into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do
not alter the plug in any way.
TM
• To reduce the risk of electric shock, do not touch the BioGP air purifier or its power plug with wet hands.
TM
• Always keep the BioGP air purifier cord away from heated surfaces.
TM
• Do not operate BioGP air purifier if the plug or cord appears damaged or is damaged. Return the unit to authorized service facility
for examination and repair.
TM
• Any attempts to open or repair the BioGP air purifier without written permission from Rabbit Air will void the warranty and could
cause serious personal injury to the user and/or result in severe damage to the unit.
• Do not use the power cord to lift, pull, carry or drag the BioGP air purifier, Avoid pulling the power cord against or around sharp
corners or edges.
TM
• Do not unplug the BioGP air purifier by pulling its power cord. Remove the power plug from its outlet by grasping the plug itself and
pulling gently.
TM
• When the BioGP air purifier plugs into the power outlet, do not put any object into the openings of the unit. Also keep all fingers,
body parts, hair, jewelry and loose clothing away from the openings.
TM
TM
WARNING: When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
Safety Instructions
2
TM
Cautions Concering the Operation of BioGP Air Purifier
• Do not block the intake and air outlet.
• Do not use the unit near or on hot objects such as a stove.
• Do not use the unit where it may come into contact with steam.
• Do not use the unit on its side.
• Do not install the unit in a location where there is heavy generation of oily residue such as kitchen.
• Do not use detergent or soap to clean the unit.
• Do not operate the unit without installing the filters.
TM
• Do not wash & reuse the BioGP HEPA filter.
• When transporting the unit, always hold the handle on the back of the unit.
Remote Control Limitations
• Do not use the remote control near inverter lighting equipment or electronic light fixtures.
• Avoid leaving the remote control in direct sunlight. Heat may interfere with remote control signals.
Installation Guidelines
• Keep a distance of at least 3 feet of space between air purifier and any equipment which involve electric wave such as televisions,
radios or wave clocks.
TM
• Leave at least 2 inches of space between the wall and the BioGP air purifier.
TM
• Avoid locations where BioGP air quality sensors are exposed to direct wind.
• Avoid locations where excessive dirt comes into contact with the intake or air outlet.
3
Front View of Air Purifier
Air Outlet
Odor/Chemical Sensor
Detects odor such as
tobacco smoke, pets,
household chemicals
and etc.
Main Unit Display
Indicator lights and main control
button for the air cleaner.
Filter Reset Button
After replacing or cleaning the
filters, press the filter reset
button to reset the indicators.
Dust/Particle Sensor
Detects dusts, smoke, pollen,
animal dander and etc.
Washable charcoal based
activated carbon filter
Absorbs and removes common
household odors, VOCs,
chemical smells & cigarette odor.
TM
BioGP HEPA Filter
"Next Generation" HEPA filter
made of bio-engineered fiber
traps and destroys the allergens
such as pet dander, dust mite
and pollen which accumulate on
the filter.
Nano-Silver Pre-Filter
Aids in Sterilization and collects
pet hair, Large size allergens
and dust.
Front Panel
Part Names
Back View of Air Purifier
Handle
Slot to place remote control
Power cord
Power plug
4
Main Unit Display
Remote Control Operation
Transmitter
Standby Button
Pressing this button will put the unit to standby mode.
Negative Ion Mode Button
Unit will generate negative ion by pressing this button.
Turbo Mode Button
Unit will operate at the highest fan speed for 10 minutes
and then changes to Auto mode.
Pollen Mode Button
This mode of operation is good for the pollen season.
The unit will alternate between low and medium fan
speed every 10 minutes
Fan Level Button
The fan speed can be switched between Low, Medium,
High and Turbo.
Auto Mode Button
Silent or Sleep Mode Button
Timer Button
The fan speed of the air cleaner will
change automatically depending on the
amount of impurities in the air as detected
by the dust and odor sensors.
Unit will operate at a lower fan speed and
the operation is totally silent.
Us d to set the Off Timer.
The set time switches every time the button
is pressed as shown below.
e
1 hours 2 hours
off timer
4 hours
The indicator light shows the remaining time.
The unit stops operating when the timer is up.
Remote Control Receiver
Rabbit Air
Negative Ion Indicator
Unit will generate negative ion when this
indicator is on.
Filter Cleaning Indicator
The filter cleaning indicator will illuminate
when it is time to clean the filters and reset
the indicator.
Filter Replacement Indicator
The filter replacement indicator will illuminate
when it is time to replace the filters and reset
the indicator.
Particle/Dust Level Indicator
Indicates level of dust or patricles by
changing color in five steps from light green,
green, yellow, orange to red. (Light Green
represents good air quality & Red represents
poor air quality)
Fan Level Indicator
Indicates the fan speed of the air purifier.
Main Control Button
You can change operation modes, turning
the unit on and off or changing the fan
speed of the unit by using this control button.
Operation Mode Indicators
Indicator lights for Auto Mode, Turbo
Mode, Sleep Mode and Pollen Mode.
Timer Display Indicator
Unit will turn off automatically after preset time duration.
Odor/Chemical Level Indicator
Indicates chemical and odor levels by
changing color in five steps from light
green, green, yellow, orange to red.
(Light Green represents good air quality
& Red represents poor air quality)
Unit Status Indicator
Unit status indicator will stay on when the air purifier
is on standby or is operating. The indicator will flash
for 15 seconds when the air purifier is detecting the
air quality baseline.
Loading...