Rabbit AIR MINUSA2 User Manual
Quick Start Guide
Do not operate the unit until completing these steps first
MinusA2 initial filter installation
Let’s Begin!
1. Remove the front panel by lifting
from the bottom and pulling up.
4. Remove the white Medium Filter from the black frame to discard the plastic wrapping. Return the filter to its frame.
Your customized filter will be packaged in plastic outside of the unit.
Set the filter aside for later installation (step 6).
2. Remove the fillter case by
grasping the handles on either side
and pulling forward. Lay the filter
case on a flat surface.
3. Pull the tabs on the front of
the Pre-filter to remove it.
5. Remove HEPA Filter and discard plastic
wrapping.
7. Pull out the Activated Carbon Filter and discard
plastic wrapping.
24/7 customer care
6. Remove the empty Customized Filter frame from
the case. Locate the Customized Filter set aside from
earlier and remove it from its plastic wrapping.
Insert the filter into its frame. Make sure the front of
the filter is facing up. See Customized Filter chart,
below, to identify the front of your filter.
For questions, call 888.866.8862
Visit us at www.rabbitair.com
Next Page
Finishing up!
Do not operate the unit until completing these steps first
8. Return the filters to the filter case in
the following order from back to front:
Activated Carbon Filter,
Customized Filter,
HEPA Filter,
Medium Filter,
Pre-filter.
(See diagram at right)
9. Return filter case to the unit. Slide
the bottom of the case back into the
unit (1), then press the top in (2).
Pre-filter tabs
Front panel
Medium Filter
BioGS HEPA
Filter
Pre-filter
Customized
Filter
Charcoal Based
Activated Carbon
Filter
Filter case
10. Reattach the front panel by latching the top
hooks, then securing the bottom of the panel.
A childproof feature pauses air purifier operation
when the front panel is removed
11. Filter Reset - The Replace Filters
Indicator will become illuminated
when it is time to change your filters.
Once you have replaced the filters,
press and hold the Mode/Filter Reset
button for three seconds, or until the
Filter
Reset
Replace Filters Indicator clears itself.
Know your Customized Filter!
BackFront
Toxin Absorber Customized Filter:
Front color: Purple
Back color: Black
Pet Allergy Customized Filter:
Front color: Purple & Orange
Back color: Orange
Germ Defense Customized Filter:
Front color: Purple & Yellow
Back color: Yellow
Odor Remover Customized Filter:
Front Color: Black (thicker fabric like material)
Back color: Black
Scan this QR code to watch our
MinusA2 filter maintenance
video, or watch it online at:
www.rabbitair.com/video
©2016 Rabbit Air. All rights reserved. MINUSA2QS1602
24/7 customer care
For questions, call 888.866.8862
Visit us at www.rabbitair.com
Loading...