Qwizdom QTABLET User Manual
Connect
User Guide
Copyright 2008
Qwizdom Actionpoint User GuideI
Table of Contents
Part I Introduction
Part II Getting Started
................................................................................................................................... 31 Notice
................................................................................................................................... 42 Installing Qwizdom Connect
................................................................................................................................... 53 Hardware Setup
Part III Content Manager
................................................................................................................................... 71 Importing and Exporting
................................................................................................................................... 72 Printing
................................................................................................................................... 73 Standards
................................................................................................................................... 74 Presentation
.......................................................................................................................................................... 9Presentation Setup
......................................................................................................................................................... 12Presentation Settings
......................................................................................................................................................... 12Saving Results
......................................................................................................................................................... 13Remote Login
.......................................................................................................................................................... 14Presentation Features
......................................................................................................................................................... 16Response Graph
Part IV Live Editor
3
3
6
20
................................................................................................................................... 231 Creating Slides
................................................................................................................................... 272 MathML
................................................................................................................................... 283 Styles and Templates
................................................................................................................................... 284 Multimedia
Part V Qwizdom Actionpoint
................................................................................................................................... 301 Actionpoint Overview
................................................................................................................................... 302 Slides
................................................................................................................................... 313 Participants
................................................................................................................................... 344 RF Remote Setup
................................................................................................................................... 385 Presentation
.......................................................................................................................................................... 39Presentation Setup
......................................................................................................................................................... 41Presentation Settings
......................................................................................................................................................... 42Saving Results
......................................................................................................................................................... 43Remote Login
......................................................................................................................................................... 44Presentation Queue
.......................................................................................................................................................... 45Presentation Features
......................................................................................................................................................... 47Response Graph
................................................................................................................................... 516 Reports
30
Qwizdom Actionpoint 2007
Contents
II
Part VI
Answer Key
Part VII Question Bar
Part VIII Users/Participants
................................................................................................................................... 601 Groups
................................................................................................................................... 602 Seating
................................................................................................................................... 613 Attendance
Part IX Results/Reports
Part X Settings/Preferences
Part XI Remote Setup
................................................................................................................................... 671 Notice
................................................................................................................................... 682 Q2RF
................................................................................................................................... 703 Q4RF
................................................................................................................................... 714 Q5RF
................................................................................................................................... 735 Q7RF
................................................................................................................................... 746 Using Remotes in Presentation
52
55
57
61
63
63
Part XII
Troubleshoot
................................................................................................................................... 771 Uninstalling Software and Hardware
77
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide3
This is a user guide for the
Qwizdom Connect
. This guide provides information and tips on
using
Qwizdom Connect
.
If you need assistance, please contact
Technical Support
.
Website
www.qwizdom.com
Tech Support
(253) 770-1285
Email
support@qwizdom.com
Support Hours
6 a.m. to 4:30 p.m. PST
Address
Qwizdom, Inc.
12617 Meridian East
Puyallup, WA 98373
Some map images are derived from maps © 2006. Map Resources, Lambertville, NJ 08530
www.mapresources.com
Contents of Remote Set
Q2RF, Q4RF, or Q5RF Remotes
*
1 RF Host
1 Q5RF Instructor Remote
1 USB Cable
1 Charger (Q5RF Instructor Remote)
*
1 Multi-charger (Q5RF Remotes)
*
1 Screwdriver
AA Batteries (Q4RF) or AAA Batteries (Q2RF)
*
1 Remote Carrying Case
1 Quick Reference Guide
**
1 Software;
Qwizdom Connect
*Remote types and accessories based on actual order. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
**Full user guide is located on the disc and at www.qwizdom.com.
Notices of Compliance for Qwizdom's RF Response Devices
1 Introduction
2 Getting Started
2.1 Notice
Qwizdom Actionpoint 2007
Getting Started
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, users and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
·
Reorient or relocate the receiving antenna.
·
Increase the separation between the equipment and receiver.
·
Connect the equipment into an outlet on circuit different from that to which the
receiver is connected.
·
Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications to Qwizdom's RF hardware that are not expressly
approved by Qwizdom could void the user's authority to operate the equipment.
This product is designed for the 2,4 Ghz WLAN network throughout the EC region and Switzerland with restrictions in France.
System Requirements
Windows XP
and later with
Service Pack 2
Microsoft PowerPoint 2003
or later (registered version)
Microsoft Excel 2003
or later (registered version)
Microsoft .NET Framework 3.5
(included in installer)
Intel Pentium
1Ghz
1G of RAM
5 GB of disk space
CD-ROM drive
Open USB Port
Installing Qwizdom Connect
1.
Insert the
Qwizdom Connect disc
into the CD-ROM drive. The
Qwizdom Connect
wizard will appear.
2.
Click on
Next
. The
Select Installation Folder
section appears.
3.
You have the option to select the location of where you would like the
Qwizdom
Connect
or use the default location.
4.
Click on
Next
to begin the installation. This will take a few moments.
5.
Once the installation is complete, click on
Close
and restart your computer.
4
2.2 Installing Qwizdom Connect
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide5
1.
Plug the USB cable into the RF Host and then plug the other end of the USB cable
into an open USB port.
2.
Place two AA batteries (provided in the remote set) and insert the screw (optional)
into the back of the Q4RF remote to secure the battery compartment; or place two
AAA batteries (provided in the remote set) and insert the screw (optional) into the
back of the Q2RF remote to secure the battery compartment Plug the Q5RF
participant and Q5RF instructor remotes into the multi-charger and/or single
charger for 24 hours before first use.
Installing USB Drivers on Vista
You will need to do this procedure twice (
because there are two drivers
).1.Insert the
Qwizdom Connect
disc into the computer and make sure the host is
plugged in properly.
2.
From the
Start
menu, go to the
Control Panel
.3.Click on
Hardware and Sound
.4.Click on
Device Manager
.5.Select the option
View Devices by Type
under the
View
menu.
6.Qwizdom RF Host
should be located under
Universal Serial Bus Controllers
,
Ports
and
Unknown
or
Other Devices
.7.When you find it, double-click on it and click on the
Driver
tab.8.Click on the button that says
Update Driver
. The installation wizard will appear.
9.
Select "
Browse Computer for Software Driver
" and click
Next
.
10.
Click on the
Browse
button. A window appears.
11.
Click on
My Computer
, click on the drive that
Qwizdom Connect
is in, and then find
the folder that says
USB_Drivers
.
12.
Click
OK
and then
Next.
13.
When it's done installing, click on
Close.
Repeat the above steps once more and
then restart your computer.
Installing USB Drivers on Windows XP
You will need to do this procedure twice (
because there are two drivers
).1.Insert the
Qwizdom Connect
disc into the computer and make sure the host is
plugged in properly.
2.
From the
Start
menu, go to the
Control Panel
or go to
Settings
and then
Control
Panel
.3.Double-click on the
System
icon and click on the
Hardware
tab.
4.
Click on the
Device Manager
button.
5.
Select the option
View Devices by Type
under the
View
menu.
6.
Qwizdom RF Host or Qwizdom USB Base
should be located under
Universal Serial Bus
Controllers
,
Ports
and
Unknown
or
Other Devices
.7.When you find it, double-click on it and click on the
Driver
tab.8.Click on the button that says
Update Driver
. The installation wizard will appear.
2.3 Hardware Setup
Qwizdom Actionpoint 2007
9.
Select "
Install from a list or specific location
" and click
Next
.
10.
Select "
Search for the best driver in these locations
" and check the "
Search removable
media
" and "
Include this location in search
" boxes.
11.
Click on the
Browse
button, click on
My Computer
, click on the drive that
Qwizdom
Connect
is in, and then find the folder that says
USB_Drivers
. (Do not open the
folder).
12.
Click
OK
and then
Next.
A prompt will appear that says the drivers have not passed
the
Microsoft Windows Update
testing, click on
Continue Anyway
and then
Finish
.
13.
Repeat the above steps once more and then restart your computer.
3 Content Manager
Click on the
Content Manager
button in the floating toolbar.
Content Manager
opens.
Content Manager
displays all created and imported activities.
Create a New Folder
1.
Click on the
New Folder
button.
2.
Enter a name for the folder and click on
OK.3.
The folder appears in the
Content Tree
on the left.
Create a New Activity
1.
Click on the
New Activity
button.
2.
Enter a name for the activity and click on
OK.3.
The activity appears in the
Content Tree
on the left.
Create a New Answer Key
1.
Click on the black arrow to the right of the
New Activity
button.
2.
Select "
Create and Add Answer Key file
" and enter a name.
3.
Click on
OK
and the answer key will appear in the
Content Tree
on the left.
4.
Double-click on the answer key file to launch the
Answer Key
window. See
Answer Key
for more information.
Getting Started
6
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide7
Importing Activities (
.QAP
and
.QZA
)
1.
Go to the
File
menu and select
Import Activity or Archive
. The
Open
window appears.
2.
Select the
File of Type
: .
QAP
or .
QZA
to import.
3.
Select the activity and click on
Open
. The activity will import into the
Content Tree
.
You can also drag and drop activities (.
QAP
, .
QZA
, .
QAK
) into the
Content Tree
.
Importing External Documents
1.
Go to the
File
menu and select
Import External Document
. The
Open
window appears.
2.
Select the file you would like to import and click on
Open
. The external document
will import into the
Content Tree
.
1.
Select an activity and go to the
File
menu.
2.
Select
Print
. The activity will print.
Installing Standards
1.
Click on the
Settings/Preferences
button in the
Qwizdom Connect
toolbar.
2.
Click on the
Standards
tab.
3.
Select your state standards in the
Select State
drop-down list.
4.
Click on
Download State Standards
to download your state standards into
Qwizdom
Connect.
Applying Standards
1.
Click on the
Standards
button. The
Standards
window appears.
2.
Select the standard at the level you want to apply to the slide(s).
3.
Click on
Add
and then
Done
. The standards will appear in the
Standards
tab at the
bottom of the
Content Manager
window.
If the
Standards Properties
tab isn't displayed, go to the
View
menu and select
Properties
.
Presenting an Activity
1.
Select an activity to present.
3.1 Importing and Exporting
3.2 Printing
3.3 Standards
3.4 Presentation
Qwizdom Actionpoint 2007
Content Manager
2.
Click on the
Present
button. The
Presentation Setup
window appears.
3.
Click on the
Participant
List
drop-down field and select what type of participant list
you would like to use.
4.
Click on the
Saved
Results
drop-down field and select how you would like to save the
results.
5.
Select the options you would like available during presentation in the
General
,
Login
,
and
Display
tabs in the lower part of the
Presentation Setup
window.
6.
Click on
OK
to begin the presentation.
Presenting Multiple Answer Keys
Feature coming soon.
Before presenting an activity using
Qwizdom
remotes, please see
Presentation Setup
to
learn about the presentation features.
1.
Click on the
Present
button.
2.
The
Presentation Setup
window appears.
3.
Click on the
Participant
List
drop-down field and select what type of participant list
you would like to use.
4.
Click on the
Saved
Results
drop-down field and select how you would like to save
the results.
5.
Select the options you would like available during presentation in the
General
,
Login
,
Display
, and
Chart
tabs in the lower part of the
Presentation Setup
window.
6.
Click on
OK
to begin the presentation.
8
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide9
7.
Have the participants turn on their remotes.
8.
Either the answer choices or a blank screen appears on the remote, depending on
the question type.
Here are a few things you may execute during presentation:
·
Display the response chart by pressing the / key
·
Display the private graph by pressing the zero key
·
Randomly call upon a participant by pressing the
Pick
key9.Go through the presentation until all the question slides are answered.
10.
When you are unable to advance to the next slide, this means the presentation is
complete. Click on the
Utilities
button and select
Exit
.
There are many options you can apply to your presentation. Not all options will be
applicable.
General
tab:
·
Send Right/Wrong Feedback to Remotes after answering
-remotes will receive a
check mark
if answer is correct and an
X
if answer is incorrect. Remotes will receive
both a
check mark
and
X
if feedback is turned off to indicate that the response has
been received.
·
Allow participants to change answer
-checking this option allows participants to
change their answer for the question slide they are on.
·
Override Points Value with Global Point value of "----" points
-enter the new amount
of points that will be applied to the slide temporarily for that presentation.
·
Timer
-you can select no timer, use the time set within the slides, and global timer by
entering the number of seconds for all slides in the presentation.
3.4.1 Presentation Setup
Qwizdom Actionpoint 2007
Content Manager
Login
tab:
·
Require Login by ID
-checking this option will have remotes prompt participants to
enter their participant ID.
·
Show Login Screen
-displays the login screen so the instructor can view the
participants that are logging in.
·
Add & Allow Unregistered participants
-participants will be added to the participant
by logging in with their participant ID. This option must be checked when using an
Anonymous
list. For the
Anonymous
list, participants will only log in with the session
ID.·Deny Login After "----" minutes
-logins after the set amount of time will not be
accepted.
Display
tab:
·
Show function toolbar (not needed if using Presenter Remote)
-
checking this option
will display toolbar with
Response Chart
,
Pick
, and
Re-pose
buttons.
·
Display Response Indicator
-this displays the percentage of the class that has
answered; double-click the percentage to convert to a fraction.
·
Show 'Start/Stop' responding to questions indicator
-clicking on
Stop
will pause the
presentation and responses will not be accepted. Clicking on
Start
reposes the
question.
10
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide11
Chart
tab:
·
Automatically Show Correct Answer on Chart
-
checking this option will display
toolbar with
Response Chart
,
Pick
, and
Re-pose
buttons.
·
Background Filename
-selecting this option will allow you to select an image to
display as the response chart background.
·
Select Graph Layout
-select how the response chart will be displayed during
presentation.
Advanced Settings
Advanced Settings
·
Allow Instructor to go back to a previous slide
-checking this option allows the
instructor remote to move back to a previous slide.
·
Reset Com-Port When Starting Presentation
-this option is checked by default to
ensure the host activates when presentation begins.
·
Ask for confirmation of User ID when not on list
-the remote will prompt the
participant for the user ID again, if the participant is not in the participant list that is
loaded.
Advanced Hardware Settings
·
Don't require "Send" on single key answers
-the remote will automatically send the
answer once it has been entered.
Qwizdom Actionpoint 2007
·
Disable "Change UserID" menu during Login
-hides the "
User ID
" option from the
menu.
·
Disable "Change SessionID" menu during Login
-hides the "S
ession ID
" option from
the menu.
·
Disable "Change UserID" menu during active Session
-hides the "
User ID
" option
from the menu during presentation.
·
Disable "Change SessionID" menu during active Session
-hides the "
Session ID
"
option from the menu during presentation.
·
Do not show what key was pressed on Q2's
-does not show the key that is pressed
on the display.
·
Turn off remotes on presentation end
-automatically turns off the Q2RF and Q4RF
remotes when a presentation ends.
3.4.1.1 Presentation Settings
Presentation settings can be saved and loaded (onto the same computer or another
computer) into the
Presentation Setup
window of
Actionpoint
,
Answer Key
, and
Question Bar
applications.
Saving Presentation Settings
1.
In the
Presentation Setup
window, select the options you would like during
presentation.
2.
Go to the
File
menu and select
Save Settings
. The
Save As
window appears.
3.
Enter the name for the selected settings.
4.
Click on
Save
. The settings will save as a .
CFG
file in the location you selected.
Loading Presentation Settings
1.
In the
Presentation Setup
window, go to the
File
menu.
2.
Select
Load Presentation Settings
. The
Open
window appears.
3.
Select the saved settings file (.
CFG
) and click on
Open
.4.The current settings in the
Presentation Setup
window will change to the settings
you selected to load.
All results are saved as an .
QRX
file but can be converted into a .
CSV
(Comma Separated
Values) file.
Manual Save
1.
Click on the
Present
button. The
Presentation Setup
window will appear.
2.
Select
Browse for Save Location
.3.Click on the
Browse
button. The
Save As
window appears.
4.
Select a location to save the results in.
5.
Enter the name you want the results to be saved as.
Content Manager
12
3.4.1.2 Saving Results
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide13
6.
Click on
Save
. The file name and location will appear in the
Save Results
field.
7.
The results will save in the selected location.
Auto-save
1.
Click on the
Present
button. The
Presentation Setup
window will appear.
2.
Select
Auto Save as 'Filename + List + Date.'
3.
The
Browse for Folder
window appears.
4.
Select the location and click on
OK.5.
The file name will contain the location, name of the participant list, date, and time
under the
Save Results
field.
6.
The results will save when the presentation is complete.
Auto-Save to Results Manager
You must be logged into
Qwizdom Online
to access this feature.
1.
Click on the
Present
button. The
Presentation Setup
window will appear.
2.
Select
Auto Save to Results Manager.
3.
The results will save in the
Results/Reports
window when the presentation is
complete.
Logging in with IDs allows participants to use any remote. If you use participant IDs from a
participant list, the ID will link the remote to the participant's information in the list.
To have participants log in, they must have a participant ID. Participant IDs are setup when
creating participant lists. (Go to
Participant Lists
for more information). Each participant
should have a unique ID assigned to their name.
·
Participant IDs can only be numeric.
·
The maximum number of digits allowed for IDs using the Q2RF remotes is 8.
·
The maximum number of digits allowed for IDs using the Q4RF remotes is 9.
·
The maximum number of digits allowed for IDs using the Q5RF remotes is 8.
·
IDs cannot be used for more than one participant (IDs cannot be duplicated).
1.
Select an activity or create one to present.
2.
Click on the
Present
button. The
Presentation Setup
window will appear.
3.
Select a participant list from the "
Participant List
" drop-down menu.
4.
Click on the
Login
tab.
5.
Check the "
Require Login by ID"
option.
6.
Checking the "
Show Login Screen
" is optional.
7.
Select all other preferred options and click on
OK
to present. The presentation will
begin.
8.
The remotes will display "
User ID
."9.Participants will enter their ID and press the
Send
(double arrows) key.
10.
Once everyone has logged in, begin the presentation.
3.4.1.3 Remote Login
Qwizdom Actionpoint 2007
You can start the presentation as participants log in. Participants who are late, can log in
later if you have not set a timer to deny log-in.
Login Timer
You can deny login after a certain amount of time by setting the time under the
Login
tab.
1.
Check the "
Deny Login After ---- Minutes
" option.
2.
Enter the number of minutes that participants have to log in.
For example, you have select to deny log in after 5 minutes. After 5 minutes has passed,
participants who try to log in will be denied.
3.4.2 Presentation Features
Function Bar
The control bar has the
Response Graph
,
Pick
, and
Re-Pose
buttons. To view the control bar
during presentation, select "
Show Function Bar"
in
Display
tab.
Response Graph
1.
Click on the
Response Graph
button.
2.
The
Response Graph
appears.
3.
Click on the available chart(s) to view the results.
4.
Double-click on the title bar of the window to display the graph in full screen.
Picking Participants
1.
Click on the
Pick
button to randomly call up on a participant.
2.
The participant's name will appear on screen.
3.
Click on the
Pick
button again to remove the name.
Re-posing a Question
Re-posing is used to ask a question again and/or when you accidentally skip a slide that
needs to be answered. Re-posing the question overwrites the previous responses if any are
recorded.
1.
Click on the
Re-pose
button to ask the question on the slide again.
Response Indicator
Content Manager
14
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide15
The response indicator displays the percentage of participants that have answered.
In the
Presentation Setup
window:
1.
Check the "
Display Response Indicator
" box in the
Display
tab.
2.
In presentation mode, you can move the response indicator by clicking on it with
the mouse and dragging it to another area of the screen.
3.
To change the indicator view, double-click on it to display responses as fractions.
4.
Double-click again to change indicator back to percentage.
Start/Stop Indicator
The start/stop indicator resets the time and reposes the question.
1.
Check the "
Show 'Start/Stop responding to questions indicator
" box in the
Display
tab
of the
Presentation Setup
window.
Timer
To view the timer during presentation, click on the
Timer
drop-down list in the
General
tab
to view the timer options. Here are a few tips on using the timer:
·
The timer has pause/play, stop, and add/subtract 5 seconds options.
·
You can move the timer by clicking on it and dragging it to another area of the
screen.
·
Remotes will not be able to answer when time is up.
You can set the timer two ways; use the time from each slide or apply a new time to the
presentation. When you create a slide, you enter the amount of time you want the slide to
display for.
To set a new time to the presentation:
1.
Click on the
Timer
drop-down list and select "
Use Global Timer Value of----
"2.Enter the number of seconds.
3.
Click on
OK
to present the presentation with the newly set time.
Points
You can set the point value two ways; use the point value from each slide or apply a new
point value to all the questions in the presentation. When you create a slide, you enter the
number of points the correct response will be awarded. Go to
Creating a Slide
for more
information.
To apply a new point value to all the questions in the presentation:
1.
Check the "
Override Point Value with Global Point value of ---- points"
option.
2.
Enter the number of points.
3.
Click on
OK
to present the presentation with the newly set time.
Qwizdom Actionpoint 2007
Right/Wrong Feedback
This allows participants to see if their response is right or wrong.
1.
Check the "
Send Right/Wrong Feedback to Remotes after answering"
box in the
General
tab of the
Presentation Setup
window.
Feedback will appear on the LCD screen of the participant's remote during presentation. A
check mark
will indicate a correct response, an
X
will indicate an incorrect response. If the
feedback is disabled, a
check mark
and
X
will appear on the LCD screen indicating that a
response was received.
3.4.2.1 Response Graph
During presentation, you can display a response graph to see the results of the question.
There are two response graphs you can display: the public response graph and the private
graph.
Public Response Graph
1.
Press the
/
key on the RF instructor remote.
2.
The response graph will appear on screen for the participants to view.
3.
Press the right/left arrows to view a different graph of the results.
4.
Press the
/
key again to remove the response graph.
If you have a graph displayed, either on the instructor remote or computer, you
must first remove that graph before displaying the other graph and/or move onto
the next question.
Bar Chart
Content Manager
16
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide17
Press circle key to show bars horizontally or vertically.
Pie Chart Displaying Correct Answer with Number of Responses
Pie Chart Displaying Correct Answer with Percentages
Qwizdom Actionpoint 2007
Content Manager
Pie Chart Displaying Number of Responses
Pie Chart Displaying Number of Responses
18
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide19
List View Chart
Scores Chart
Qwizdom Actionpoint 2007
Content Manager
Private Response Graph
1.
Press the
0
key on the RF instructor remote.
2.
A bar chart showing the number of responses will display on the RF instructor
remote's LCD screen.
3.
Press the
0
key again to remove the graph.
Click on the
Live Editor
button in the floating toolbar.
Live Editor
opens.
Live Editor
enables you to create slides to present within
Qwizdom Connect
.
20
4 Live Editor
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide21
Editor Toolbar
Slide navigator
Pen tool
Create new question
Line tool
I indicates Information slide
Shapes tool
Q indicates question slide
Text tool
Copies current slide as into slide set
MathML
Poses selected slide
Insert image
Deletes a selected object on the slide
Insert multimedia
Undo/redo
Color
palette
Selects objects on slide
Full screen mode
Font Toolbar
The font toolbar only appears when there is an active text box.
Qwizdom Actionpoint 2007
Live Editor
Font type selector
Center justify
Font size selector
Right justify
Bolds font
Subscript
Italicizes font
Superscript
Underlines font
Bullets
Left justify
Text box type
Slides Tab
Displays thumbnails of all slides in the activity.
Media Tab
Allows you to search and use images in the
Qwizdom
database.
Templates Tab
Displays slide templates.
22
Qwizdom Actionpoint 2007
Qwizdom Actionpoint User Guide23
Styles Tab
Displays slide styles.
Information
Non-question slide.
1.
Click on the
New Question
button. A blank slide will appear on the right and
the thumbnail preview of the slide will appear in the
Slides
tab on the left.
2.
Click on the
Type
drop-down list and select
None
as the slide type.
3.
Enter text onto the slide; adding multimedia such as images, movies, sound and
using templates and styles are optional.
4.
When the slide is complete, either go to
File
menu and select
Exit
; or click on the
New Question
button to create a new slide set.
4.1 Creating Slides
Qwizdom Actionpoint 2007
Loading...