Qwest CID98-LS User Manual
CID98LS_qwest Manual 11/8/00 8:17 AM Page 1
Español
CID98-LS
Large Screen
Caller ID
Caller ID
Large Screen
CID98-LS
CID98LS_qwest Manual 11/8/00 8:17 AM Page 2
Call Waiting ID from Qwest combines Call Waiting with Caller ID.
Say you are already on a call, Call Waiting ID will let you know who
is calling before you answer the phone! The service provides the
caller’s name and phone number, and the date and time of each
call. All caller information is stored in the order in which it was
received for up to 99 calls.
The Large Screen Caller ID makes viewing Caller ID information
even easier. The large, easy-to-read display can be viewed
effortlessly, even from across the room. In dark or dimly lit
environments, the night backlight feature automatically lights
up when the phone rings.
Call Waiting ID enables you to identify an incoming caller
when you are already on the phone by showing the caller’s
information on the Caller ID display. You can then choose to
TABLE OF CONTENTS
Set-Up Instructions 2
Review Keys 4
Delete Key
Dial Key
Flash Key 5
New Call and Message Waiting Light
Display Contrast
Display Messages 6
2-Line Phone Installation
Installation with a Telephone Answering Machine
Connecting Directly to a Wall Jack 8
Troubleshooting Tips
Desk Stand
Wall Mounting 12
FCC Information
Warranty
Safety Information 16
4
5
5
6
7
8
9
11
14
15
answer the new call or not.
CID98LS_qwest Manual 11/8/00 8:17 AM Page 3
SET-UP INSTRUCTIONS
PHONE JACK
(ENLARGED TO SHOW
BACK PANEL)
Step 1
Connect the phone cords. Then connect the power adapter.
Note: Do not plug the power adapter into a wall outlet that is controlled
by a wall switch.
For diagram showing two-line installation, see p. 7
For diagram showing installation with an answering machine, see p. 8
For instructions on wall mounting, see p. 12
Step 2
To select the language (English or Español):
OUTLETID UNIT
a) Press and hold the DIAL key while pressing the left REVIEW key
to see the selections.
b) Release the DIAL key to confirm the setting.
9V DCPHONE TEL LINE
Step 3
The Call Waiting ID unit can dial numbers for you that appear in the display.
To help you dial, the unit needs to be set for your local dialing rules. Do
you dial local calls using seven digits, or in your area are you required to
dial ten digits?
a) Press and hold the DIAL key while pressing the right REVIEW key
to see the selections.
b) Release the DIAL key to confirm the setting.
2 3
CID98LS_qwest Manual 11/8/00 8:17 AM Page 4
10:03 AM 12/30
CALLS 48
303 - 555 - 1234
JOHNSTON, ROBERT
DELETE
FLASH
REVIEW KEYS
Press the REVIEW keys to scroll through the call entries.
Calls are displayed in the order they were received.
The left REVIEW key displays entries from newest to oldest (from 99 to 1).
The right REVIEW key displays entries from oldest to newest (from 1 to 99).
When you reach the end of the call history, the screen displays END OF LIST.
DELETE KEY
To erase the entry shown on the display press the DELETE key twice within
one second. The display will show DELETED and move to the next entry.
To erase all entries, press and hold the DELETE key for approximately five
seconds until CALLS DELETED appears on the display.
REVIEWDIAL
INDICATOR LIGHT
Green if you have received new
calls that have not been reviewed.
Red if you subscribe to Voice Mail
service and you have a new
message waiting.
DIAL KEY
To dial the phone number shown in the display, simply press the REVIEW
keys until the number you want to dial is displayed. Lift the handset and
get a dial tone on the phone connected to the Call Waiting ID unit.
If the number in the display is a local call, press the DIAL key once, and
the unit will dial the last seven digits or all ten digits, according to your
setting for local dialing.
If the number in the display is a long distance call, press the DIAL key
twice within one second, and the unit will dial a “1” before dialing the
area code and number.
FLASH KEY
When a Call Waiting call comes in, you can press the FLASH key to
switch to the new call. To return to the original conversation, press
the FLASH key again.
NEW CALL AND MESSAGE WAITING LIGHT
The new call indicator and message waiting light flashes green when
you have received any new calls that have not yet been reviewed. If
you subscribe to a voice mail service through your local phone company,
the light will flash red whenever you have a new voice mail message
waiting in your mailbox. For voice mail subscribers, Call Waiting ID model
#CID98-LS detects FSK Visual Message Waiting Indication signaling offered
by your local phone company.
4 5
CID98LS_qwest Manual 11/8/00 8:17 AM Page 5
DISPLAY CONTRAST
To adjust the contrast of the screen display, press and hold the DIAL key
while repeatedly pressing the DELETE key to cycle through the contrast
settings. Release the DIAL key to confirm the setting.
IMPORTANT: Do not press and hold the DELETE key without pressing the
DIAL key. You could accidentally erase all the Caller ID entries if you press
only the DELETE key.
DISPLAY MESSAGES
The calling party is blocking name and
number information.
Qwest is unable to receive information about the caller’s
name and number.
An error occurred while receiving the
Caller ID information.
You have received new voice mail messages in your
Voice Mail service.
The total number of new calls received.
TWO-LINE PHONE INSTALLATION
OUTLETID UNIT 2ID UNIT 1PHONE JACK
TEL LINEPHONE
L1/L2
THREE-WAY PHONE JACK ADAPTERS
TEL LINEPHONE
L1 L2L1 L2
Note: You must subscribe to Call Waiting ID service on both lines.
Three-way Phone Jack Adapters
One or both adapters may not be necessary, depending on your equipment.
Adapters are available at most telephone stores.
6 7
CID98LS_qwest Manual 11/8/00 8:17 AM Page 6
INSTALLATION WITH A TELEPHONE
ANSWERING MACHINE
OUTLETID UNITANSWERING MACHINEPHONE JACK
TEL LINEPHONE
CONNECTING DIRECTLY TO A WALL JACK
A telephone is not required for the operation of the Call Waiting ID unit.
Simply plug one end of the included line cord into an empty telephone
wall jack and the other end into the jack marked “TEL LINE” on the back
of the Call Waiting ID unit.
Note: You will not be able to receive Call Waiting data when the unit is
connected directly to a wall jack and not connected to a telephone.
TROUBLESHOOTING TIPS
Caller ID information does not display when the phone rings.
•
Wait until the phone rings twice before answering.
•
Make sure the line cord from the wall is inserted in the jack marked
“TEL LINE” and that the line cord from the telephone is inserted in the
jack marked “PHONE”.
•
Make sure your Caller Waiting ID service has been activated. Call the
Qwest Services Center at 1-800-770-2513.
Information does not display when a Call Waiting
call comes in.
•
Check that all telephone line cords are correctly installed.
•
You must subscribe to the Call Waiting ID service for this feature to
work. Call the Qwest Services Center at 1-800-770-2513.
There is no dial tone on the telephone attached to the
Call Waiting ID unit.
•
Check all cords to make sure that all connections are secure.
The LCD display is dim.
•
Adjust the contrast control using the DELETE and REVIEW keys to darken
the display. See “DISPLAY CONTRAST” on Page 6 of this manual for
instructions.
8 9
Loading...