QWERT K01A, K01+B, K01C User Manual

Mini Multimedia Wireless Presentation Keyboard User Manual Ver.: V1.3
Overview
This device is a 2.4G mini wireless QWERT keyboard, touchpad combo, with multi-system supported USB interface. By advanced capacitance sense technology, notebook touchpad experience can be enjoyed. Besides traditional wireless keyboard inputting feature, it supports multimedia remote control, wireless PC game control, touchpad functioning as a mouse, Touch pad 90 degree flip, Power indicator, RF signal indicator, CAPSLOCK indicator, Low power warning indicator.
(Only for Reference)
Packing Detail
The following items are included (maybe slightly different for different distributors) Wireless Keyboard Mouse Main Unit
Wireless Receiver
Charging and Data Cable
User Manual
System Requirement
HID compatible device
USB port
Windows 2000
Windows XP
Windows Vista, Win CE, Win 7,Win 8
Linux(Debian-3.1, Redhat-9.0 Ubuntu-8.10
Fedora-7.0 tested)
Android OS (With standard USB interface)
Specification
Dimension: 151*59*12.5mm
Weight: 100g
Operation Temperature Range: -10to 55
Battery Type: Polymer Lithium-ion Battery
Standby Time: 500-700 hours
Transmission power: maximum +4dBM
Charging Voltage: 4.2V - 5.05V
Charging Current: < 350mA
Sleep Mode Current: < 1mA
Installation and Operation
Open the packing and remove the product
Remove the receiver from the main unit flank
chamber, and insert the receiver into terminal standard USB port
Turn on the device and wait for the connection to be
done
Begin to use your wireless keyboard
Note: USB charging cable can be used to charge the battery by connecting to the computer, etc.
Turn on/off the Backlit LED (Only for A/B versions)
Two Modes: Software Control and Manual Control When the wireless connection is successful, the backlit LED will be automatically on 3 seconds, then off, to save
power and lengthen standby time. You can click the backlit LED button to turn the LED on. Users can turn on the LED in dark environment for better operation.
Sleep and Wake Up
Sleep mode is supported, to save power and lengthen standby time. If there is no operation more than 3 minutes, the device will enter sleep mode, with Backlit LED off, RF indicator on. In sleep mode, one random click on the keys can wake up the device.
Turn off the Device after Use
After use, push the Power Switch to OFF position to turn it off. 2.4G receiver should be plugged out and placed back to the receiver chamber for future use.
Charging the Battery
This device adopts built-in Polymer Lithium-ion battery. Please use the cables and chargers approved by my company. Note: For initial operation, the battery should be fully charged.
Use the portable charger:
1. Connect the charger to the device.
2. Connect the charger to the power supply or connect
the charging cable to computer USB port.
3. After about 1 hour (if the power is exhausted, longer time is required), upper left charging indicator will be on. When the charging is finished, plug out the charger or disconnect USB connection to the computer, and remove the charging cable from the device. Note: You can use the device when charging, but charging time will be extended. When the power is low, the low voltage indicator will warn.
If the power is to be exhausted, the device will be off.
Use the Laser Pointer (only for A/B versions)
Push the Power Switch to ON to turn on the device (2.4G receiver is not required to connect) and make the following operation: When you want to use laser pointer, press and hold the laser pointer switch to turn it on; remove your finger from the switch to turn it off.
Care and Maintenance
On Battery Use
• Do not attempt to disassemble the device and replace battery. Doing so will void your warranty.
• Charging time depends on battery capacity, type and charger type. Battery can be charged hundreds or thousands of times, but will be useless finally. When the battery life is apparently shortened, please contact the local distributor for battery replacement.
• Battery automatically discharges for some specific time if no operation after fully-charged.
• Do not place the device in extremely hot or cold environment, such as locked car in summer or winter. This will shorten battery life. Please try to keep it in normal temperature. If the battery is too hot or too cold, the device may not work even though it is fully-charged. Lithium battery performance will be affected if the temperature is under zero.
Maintenance
This device is designed by excellent designers. The following tips can help you to lengthen the device life. In operation:
• Place the device and its accessories out of Children
reach.
• Touch pad is fragile. Strong impact and sharp item scratch will damage the touch feature.
• Do not place it in over heat environment. High temperature will shorten the electronics product life.
• Do not place it in extremely cold environment. Temperature rising may cause internal watery, to damage device circuit board.
• If the device, battery, charger or any other accessories can not work, please resort to qualified repair service.
Declaration
This device wireless transmission frequency is 2.4GHz, compliant with European R&TTE Directive1999/5/EC, whose radiation does no harm to human (far less than mobile phones). Wireless transmission produces electromagnetic signal. In environment where are heart pacemaker or related assistance equipment, the use of this device should be done with caution. The device uses 2.4G wireless connection, subject to interference from other electronics products or obstacles; for best signal transmission, please remove the obstacles.
Disclaimer
We have tried our best to make manual information correct and complete. If there is mistake or information missing, we are not responsible for any loss. And we keep the right to alter the user manual information without prior notification.
Model Function Overview
Model Keys Master Chip Laser pointer Backlit LED Maximum Operation Range Surface Treatment
K01A P+R Cypress Yes Yes 20m UV Spray Coating
K01+A TPU Cypress Yes Yes 20m Texturing
K01B P+R HT+BK Yes Yes 10m UV Spray Coating
K01+B TPU HT+BK Yes Yes 10m Texturing
K01C TPU HT+BK N/A N/A 10m Texturing
Loading...