QVS C5YMFF User Manual

CAT5E/TELCO
RJ45/350MHZ SPLITTER CABLE
(SKU: C5YMFF) MANUAL V2
Applications Guide:
This RJ45 Y Splitter has multiple applications including
a) When used as RJ45 port splitter, only one connection must be active at a time. This is not an ethernet switch/hub splitter.
b) The RJ45 female port accommodate both RJ45 and RJ11/12 connection. When used as phone splitter, the phone wall jack must accommodate both RJ45/RJ12 connection.
Network Pair Splitter Instruction Guide:
You must have LAN/ethernet knowledge and tools like RJ45 crimp tool & LAN wiring tester. Otherwise, please consult your LAN/network administrator.
CAT5E
CUSTOM
CAT5E CABLE
CUSTOM
LAN HUB
CAT5E CABLE
WALL OUTLET
CAT5E
FULLY-WIRE
CABLE
c) When two C5YMFF are used in pair, it will allow two network connection over one cable drop (see reverse for instruction).
This RJ45 splitter cable have straight-thru pin-out configuration.
If you have any question or need any help with this cable, please go to http://www.qvs.com/support/supportform.asp You can also call us at (702) 228-3670 Monday to Friday, from 9:00am - 5:00pm PST or email us at support@qvs.com.
VISIT US ON THE WEB @
CAT5E CABLE
CAT5E CABLE
REQUIREMENTS:
This application requires 2pcs of C5YMFF, 2pcs of standard ethernet cable and 2pc custom ethernet cable.
All standard ethernet cable and in-wall CAT5e cable must be fully-wired & have straight-thru pin-out with all 8-wires connected.
Make sure to properly connect the custom ethernet patch cord.
CAT5E
WALL OUTLET
Custom
CAT5e Cable
RJ45 Wiring Pin-Out:
RJ45 (Hub)
1 2 3 4 5 6 7 8
RJ45 (C5YMFF)
4 5 7 1 2 8 3 6
Loading...