Q.V.P. NU-Matic 2, NU-Matic 4, NU-Matic 6 User Manual

INSTRUCTIONS FOR THE NU-MAtic
Nu - 2,4, or 6
8/18/06 - Nu-Matic Standard.cdr
VAKuum Bag
or
Frame Press
T wo very important items to note about the NU-Matic. The air pressure must be kept between 85 and 100 psi. Having the pressure exceed 100 psi could cause damage to some components.
The second item is to provide clean air. If you have filtered air and are using quick disconnects, make sure that the female connector is clean. Having filtered air will not do you any good if you pick up the female connector off the floor and it has sawdust and chips in it. These will blow into the components and possibly cause a problem.
VAKuum Line
Air Regulator
Compressed Air
Toggle Switch
VAKuum Sensor
The NU-Matic has a three position toggle switch in the top center of the box. This allows you to turn the unit on to run continuously or to be regulated when used with a V AKuum Bag or frame Press.
1. Attach your air line to the right side fitting (1/4 NPT).
2. Attach one end of the vacuum line to the barb on the left side of the unit. Block the other end with your thumb and flip the toggle switch to V AK Bag. The unit should go up to 25“Hg and shut off.
The black knob on the front center of the box is an air regulator, adjust it when the unit is running. The air pressure gauge must be between 85 and 100 psi when the unit is running. If not, the unit will not get to vacuum level and shut off.
The VAKuum sensor is just below the toggle switch. T urning it counter clockwise will cause the unit to shut off at a lower vacuum level. Do not adjust this unless you want less pressure (weak form) or you do not have enough air to get to vacuum level.
CALL 1-800-547-5484 TODAY!
Or visit our site at www.qualityvak.com
Quality VAKuum Products, Inc.
74 Apsley St. - Hudson, MA 01749 Tel: 978-562-4680 - Fax: 978-562-4681
Conditions of sale WARRANTIES AND DISCLAIMERS. SELLER MAKES NO WARRANTY, EXPRESSED OR IMPLIED, CONCERNING THE PRODUCT OR MERCHANTABILITY OR FITNESS THEREOF FOR ANY PURPOSE, except; (a) that the product shall conform to the description contained herein and to the specifications, if any, attached hereto; and (b) that the product does not infringe on any valid United States patent. Seller does not warrant, however, that the use of the product, or articles made therefrom, either alone or in conjunction with other material, will not infringe any United States Patent.
Liability Limitations. Buyer's exclusive remedy shall be for damages and no claim of any kind, whether as to product delivery or for non delivery of product, and whether based on contract, breach of warranty, negligence or otherwise, shall be greater in amount than the purchase price of the quantity of product in respect of which damages are claimed. In no event shall Seller be liable for incidental or consequential damages, whether Buyer's claim is based on contract, breach of warranty, negligence or otherwise. June 26, 2012
Loading...