Q.V.P. ES10 User Manual

ES10 Industrial SET-UP DIAGRAM

W

10/06/03 - .CDR (REV.2)ES5 SuperPro Klamping

Hose Adapter

VAKuum

Jig

3/8 I.D.

Pneumatic

For VAKuum KLAMPING

Remove orange plastic plug and screw in filter assembly.

Filter

Pedal

½ Tubing

Electric Pump

Electric

Controller

3/8 I.D.

The Electric Pump is always running when doing
VAKuum Klamping; therefore, put the switch on the
Electric Controller to “V AK Klamp.” NEVER do VAKuum
Klamping with the switch on “VAK Bag.”

When you are not using the pump for Klamping keep the
foot pedal off or remove the Klamping set-up.

Pressing on its top side creates vacuum to the

the pedal
VAK Klamp(s) and the VAK Bag(s). Pressing the pedal
on its bottom side shuts off the vacuum from the pedal to
the klamp and allows air to bleed back to the klamp and
release the piece.

CALL 1-800-547-5484 TODAY!

Or visit our site at www.qualityvak.com

Quality VAKuum Products, Inc.

74 Apsley St. - Hudson, MA 01749
Tel: [phone] - Fax: [phone]