© Copyright Qvis® All documentation rights reserved .1
WIRELESS OUTDOOR
SIREN & FLASH
EXSIREN-1
User’s Manual
© Copyright Qvis® All documentation rights reserved .2
1. FEATURES
1.
Dual purpose, outdoor flash and siren, which may be coded with other
wireless detectors in our range, as well as our alarm control panels.
Alarm volume: 120Db.
Easy to operate for arming, disarming and emergency help (SOS)
Radio receiving frequency: 433Mhz
When triggered, alarm sounds and LED flashes
© Copyright Qvis® All documentation rights reserved .3
2. SPECIFICATIONS
Power adaptor:
12V, 500mA
Working Current
240mA
Standby Current
20mA
Wireless receiving frequency
315MHz
Wireless distance
100m (no obstacle)
Siren volume
110Db
Working condition
-10℃~+40℃
Humidity
≤90%
3. WIRELESS SETUP
This section will explain how to code the wireless transmitter/ wireless
detectors with the flash siren.
Note: We have coded the transmitter with the siren already before delivery, so
there is no need to recode before use.
If you use it as spot alarm, and want to add more wireless detectors, please
code as follows:
1. Connect the control panel to AC Adaptor and the siren will sound a beep.
This confirms connection is successful.
2. There is a small black shaft on the left side of control panel. Press the
black shaft, which will produce a long beep; the process of code
checking is now ready. Then trigger the accessory detectors for coding
to this unit.
3. Please press the black shaft again to exit
How to delete all coded information:
If you need to delete coded information or accessories, just press the black
shaft for two seconds. A long beep confirms successful deletion.
© Copyright Qvis® All documentation rights reserved .4
4. REMARKS
1. According to your requirements, you can code one flash siren to more
transmitters, and also one transmitter can be coded to more flash
sirens.
2. This flash siren can work together with all our wireless detectors, such
as door gap sensors; PIR sensors, smoke/gas detectors, and glass
break sensors. It may be coded with up to 22 wireless accessories in
total.
3. The outdoor flash siren can also work with other wireless detectors in
our range, as well as our control panels.
© Copyright Qvis® All documentation rights reserved .5
PRODUCT WARRANTY
1. QVIS LABS warrants that the Product(s) shall be of satisfactory quality within the meaning of the
Sale of Goods Act 1979; be reasonably fit for purpose, and; free from defects in materials or
workmanship. The period of such warranties shall be as set in the price list that is current at the
date of despatch of the Product(s) and the warranty period shall commence on the date of
despatch of the Product(s).
2. Any alleged defects in the Product(s) must be notified in writing within 14 days of receipt of the
Product(s).
3. In the event of any established breach of warranty, QVIS LABS shall repair or replace in its
absolute discretion any defective Product(s). The Buyer shall be liable for the delivery charges
incurred in returning the defective Product(s) to QVIS LABS, but shall not be liable for the cost of
repair or replacement, or the delivery charge for returning the repaired or replaced Product(s) to
the Buyer. If QVIS LABS complies with this clause then it shall have no further liability for
breach of the warranty.
4. Repairs undertaken by QVIS LABS under the terms of its warranty are guaranteed for 90 days
from the date of dispatch to the Buyer.
5. Where QVIS LABS in its absolute discretion replaces any defective Product(s), the warranty on
such replacement Product(s) shall continue in effect for the remainder of the unexpired term of
the warranty commencing from the original date of despatch of the defective Product(s). Any
replaced Product(s) become the property of QVIS LABS.
6. The warranty shall not cover any defect caused:
a) By fair wear and tear.
b) In whole or in part by the negligence of the Buyer or a User.
c) By improper or unauthorised use of the Product(s) including any attempt to carry out repairs or
modifications to the Product(s).
d) By causes external to the Product(s).
7. Failure by the Buyer to settle accounts rendered for Product(s) supplied will render the warranty
null & void.
8. If the Buyer adds labels to any of the Product(s) the warranty will be invalidated.
© Copyright Qvis® All documentation rights reserved .6
For more information about our DVRs and available cameras & accessories,
please visit our website:
www.adata.co.uk
Alternatively scan this QR code with your smart phone to be directed instantly
to our website:
Loading...