6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS ZE9363STYLE NUMBER ZE9363K:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
Socket Assembly
Base Assebmly
Shade
Diffuser
Check Ring
Nipple with Hex Nut
Spacer Tube
Finial with Nipple
Finial
Description
Quantity
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
ISSUED 06-2009 Revised 2009-08-03
C
A
D
E
F
B
!
CAUTIONS
These instructions are provided for your safety. It is very important that they are read completely
●
before the installation of your fixture. We strongly recommend that a professional electrician install the
fixture.
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
●
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
●
Before beginning installation of product, make sure all parts are present. Compare parts with package
and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate
the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 15 30 minutes
●
Tools Required for Assembly (not included) : Pliers, Safety Glasses &2, 100 Watt, Type A Medium
Base Bulbs.
G
H
I
-
-
1 OF 2
ASSEMBLY INSTRUCTIONS
STEP 1:
a. Place the SocketAssembly onto the top end of the Base
Assembly as shown. Secure them together by threading
the Finial with Nipple into the Hex Coupling on the bottom
center of the Socket Assembly. Hand tighten until snug.
STYLE NUMBER ZE9363K:
Socket Assembly
Hex Coupling
Finialwith
Nipple
STEP 2:
a. Thread the Hex Nut end of the Nipple with Hex Nut (Long)
into the Hex Coupling on the top center of the Junction
Box. Using pliers, thread the Hex Nut against the Hex
Coupling and tighten until snug.
b. Pass the Spacer Tube, the Check Ring, the center hole of
the Shade and the Diffuser over the top end of the Nipple
(Long). Secure by threading the Finial onto the Nipple and
hand tighten until snug.
Base Assembly
Finial
Diffuser
Shade
CheckRing
SpacerTube
Nipple with Hex
Nut (Long)
Hex Coupling
JunctionBox
STEP 3
.
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
:
Your assembly is completed now. Retain this sheet for future reference.
2 OF 2