Quoizel ZE1508K User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS ZE1508STYLE NUMBER ZE1508K:
PACKAGECONTENTS
Part
A
B
C
D
E
F
G
H
I
J
Hex Nut (for Mounting Screw)
Description
Crossbar
Green Ground Screw
Mounting Screw
Lock Washer
Mounting Ball
6 Rod"
12 Rod"
Ceiling Canopy
Shade Assembly
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
1pc
1pc
ISSUED 09-2008
A
B
C
D
E
F
G
H
I
J
!
WARNINGSANDCAUTIONS
WARNING:
● Before beginning the instal lation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very i mpo rtant that they are read completely b efo re the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the pow er source before replacing the bulb(s), making sure t he bulb(s) had suffi cient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compar e parts with pac kage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Est imated Assembly Time: 10 20 minutes
● Tool s Required for Assembly (not included): Flathea d screwdriver Phillip s screwdriver, pli ers, electrica l
tape, wire cutters, safety glasses &1, 100 Watt, Type A Medium Base Bulb.
● Helpful Tools (not included) : Wire Stripp ers.
,
-
1 OF 3
INSTALLATION INSTRUCTIONS
STEP 1:
.
a Determine the Rods to be assembled according to your
desired hanging height.
.
b Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Metal Shade
Assembly together as shown. Tighten until snug.
STYLE NUMBER ZE1508K:
6” Rod
6” Rod
12” Rod
12” Rod
STEP 2:
.
a Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
.
b Thread the Swivel onto the top end of the Upper Rod and
hand tighten until snug.
Coupling
Supply Wires with
Ground Wire
Shade Assembly
Ceiling Canopy
Swivel
Supply Wire with
Ground Wire
Upper Rod
STEP 3:
a Screw the Mounting Screws into the Crossbar place the
. ,
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure
the position of the Mounting Screws by tightening the Hex
Nuts against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
.
2 OF 3
Mounting Screw
Crossbar
Hex Nut
Lock Washer
Outlet Box
Outlet Box Screw
Loading...