Quoizel YU8679IB User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS YU8679STYLE NUMBER YU8679IB:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
!
Hex Nut (for Mounting Screw)
WARNINGSAND CAUTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
Description
Crossbar
Green Ground Screw
Mounting Screw
Lock Washer
Mounting Ball
Socket Collar
Shade
Fixture Body
Socket Collar Tool
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
ISSUED 08-2008
G
A
H
B
C
D
E
F
I
J
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 15 30 minutes
● Tools Required for Assembly (not included): Flathead screwdriver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &1, 100 Watt, Type A Medium Base Bulb.
● Helpful Tools (not included): Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a Screw the Mounting Screws into the Crossbar place the
.,
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure the
position of the Mounting Screws by tightening the Hex Nuts
against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
,
-
Mounting Screw
Crossbar
Hex Nut
.
Lock Washer
Outlet Box
Outlet Box Screw
1OF2
ASSEMBLY INSTRUCTIONS
STEP 2:
*()
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
Wire.
.()
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
.()
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
().
carefully stuff all of the connected wires into the Outlet Box
()
STYLE NUMBER YU8679IB:
WHITE OR RIBBED
FROM HOUSE
BLACK OR RED WIRE()
FROM HOUSE
GROUND WIRE GROUND WIRE
.
FROM HOUSE FROM FIXTURE
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
STEP 3 :
a Place Backplate onto Outlet Box aligning 2 holes in the
.
Backplate with 2 Mounting screws threaded on the
Crossbar and secure it against wall with Mounting Balls
STEP 4
a Place the Shade over the Socket setting onto the Shade
.
Holder. Using Socket Collar Tool thread the Socket
Collar onto the Socket and hand tighten until snug to
secure the Shade.
:
,
.
Outlet Box
Mounting Screw
Mounting Ball
Backplate
Socket Collar Tool
Socket Collar
Shade
STEP 5
a Install correct Bulb referring to fixture markings and/or labels for maximum wattage.
.
:
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
2OF2
Socket
Shade Holder
Loading...