Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (3) Medium Base 100W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Assembly Instruction Sheet #IS-WSY1716IF
For Style WSY1716IF
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering November result.
A
G
Package Contents
H
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
Stem
Spacer
Check Ring
Flat Washer
Rubber Washer
Shade
1/8IP Hex Nut
Cage
Finial
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
I
B
C
D
E
F
J
K
L
M
N
O
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
1of5
November2013
Page 2
WSY1716IF
FINISH: ITALIAN FRESCO
5.5” Dia.
1”
12.5”
5.5”
1
16” Dia.
(3)100W
Medium Base Bulbs
(Not Supplied)
PART NUMBER
NO.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
1 G3639SH SHADE INDIA SCAVO 16"D 1
2of5
REQ.
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-WSY1716IF
For Style WSY1716IF
STEP 1 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
STEP 2 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Figure 2
Crossbar
Hex Nut
Figure 1
Outlet Box
Mounting Hole
Crossbar
Outlet Box Screw
(not supplied)
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Figure 4
Black wire from fixture
Figure 3
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
3of5
November2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-WSY1716IF
For Style WSY1716IF
STEP 4 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy on the top of the Fixture Body
(F) over the Mounting Screws (B) and secure with
Mounting Balls (E). Hand tighten until snug.
Mounting
Screw
Ceiling
Canopy
Mounting Ball
Figure 5
STEP 5 - Attach Stem to Fixture Body
A. Thread Stem (G) onto the on the Fixture
Body (F). Hand tighten until snug.
Hex Coupling
STEP 6 - Attach Shade to fixture
A. Place the Spacer (H), Check Ring (I), Flat Washer (J),
Rubber Washer (K), and Shade (L) over the Stem (G) as
shown, secure by threading the 1/8 IP Hex Nut (M) onto
the Stem (G), hand tighten until snug.
Figure 6
Fixture Body
Hex Coupling
Stem
Figure 7
Stem
Spacer
Check Ring
Flat Washer
Rubber Washer
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2013 Quoizel Inc.
1/8 IP Hex Nut
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
4of5
Shade
Rubber Washer
Flat Washer
November2013
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-WSY1716IF
For Style WSY1716IF
STEP 7 Install Cage to Fixture-
A. Place the Cage (N) over the Stem (G) under side of the
Shade (L), secure by thread the Finial (O) onto Stem (G),
hand tighten until sung.
STEP 8 Install Bulb-
Figure 8
Shade
Stem
Cage
Finial
A. This fixture uses standard bulb with a standard screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Socket
Bulb
Figure 9
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
5of5
November2013
Loading...