Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Tools Required: Flatheadscrewdriver,Phillips screwdriver, pliers, wirecutters, wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (9)G4 Base G4Xenon bulb,20W Maximumclear
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Assembly Instruction Sheet #IS-VLA1618C
For Style VLA1618C
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering June result.
Do not touch the bulb with bare hands use a cloth or glove.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
Description
Mounting Ball
Fixture Body
Bulb
Wall Anchor
Self-tapping Screw
Crystal Assembly
Lock Ball
Washer
Inner Hexagon Spanner
Quantity
1pc.
4 pcs.
1pc.
9 pcs.
4 pcs.
4 pcs.
1pc.
4 pcs.
4 pcs.
1pc.
A
B
C
D
E
F
H
I
J
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
G
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2013
Page 2
VLA1618C
FINISH: POLISHED CHROME
3”
18”
14” Sq.
2”
7”
1
18.5”
14”
2
(9)20W
Clear G4 Xenon
NO.
1
2
Maximum
(Supplied)
PART NUMBER
I1201SC
G3771CR
14”
18.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BULB 20W XENON G4 CLEAR
CRYSTAL BEAD STRAND 18.5"L
REQ.
9
12
2of4
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-VLA1618C
For Style VLA1618C
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Place the Crossbar (A) onto the ceiling and line up one
set of holes onto mounting holes on Outlet Box. Using a
pencil, mark the locations for Wall Anchors (E).
B. Remove the Crossbar (A) and drill holes from the marks
and then push the WallAnchors (E) into the holes.
C. Position the Crossbar (A) back onto the Ceiling. Thread
the Outlet Box Screws (not supplied) into the mounting
holes on the Outlet Box to secure it. Hand tighten until
snug.
D. Pass the Washers (I) over the Self-tapping screws (F)
and then thread the self-tapping screws (F) into the
Wall Anchors (E). Hand tighten until snug.
STEP 2 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
CEILING
Outlet Box
Screw
Figure 1
Outlet
Box
Wall Anchor
Mounting
Hole
Crossbar
Washer
Self-tapping
Screw
Figure 2
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
3of4
November2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-VLA1618C
For Style VLA1618C
STEP 3 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy over the Mounting Screws
and secure with Mounting Balls (B). Hand tighten until
snug.
STEP 4 - Install Bulb
A. This fixture uses Clear G4 Xenon Bulbs. Maximum 20
watts.
B. Insert bulb and seat properly into place.
IMPORTANT:
a cloth or glove.
Do not touch the bulb with bare hands use
STEP 5 Tighten the Crystal String-
A. Tighten the Allen Screw on the crystal frame with the
Inner Hexagon Spanner (J) if you find any crystal
strings are loose.
Mounting
Screw
Inner Hexagon Spanner
Crystal Assembly
Figure 4
Crossbar
Ceiling
Canopy
Mounting
Ball
Figure 5
Socket
Bulb
Allen Screw
Figure 6
STEP 6 - Install Crystal to Fixture
A. Place the CrystalAssembly (G) over the Fixture Body
(C), secure by threading the Lock Ball (H) onto the
Nipple on the bottom of Fixture Body (C), hand tighten
until sung.
Your fixture is now assembled and ready to use.
Enjoy!
Lock Ball
Fixture
Body
Nipple
Crystal
Assembly
Figure 7
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection.
B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation.
C. Use only in fixtures rated for lamps wattage and voltage.
D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. November2013
or visit us on-line at www.quoizel.com
4of4
Loading...