Quoizel UPTA8602C User Manual

6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445
Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com
,.
Assembly Instruction Sheet #IS-UPTA8602C
For Style UPTA8602C
Tools Required: Flatheadscrewdriver,Phillips screwdriver, pliers, wirecutters, wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (2)G9 Base 60WMaximum(Supplied) EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Do not touch the bulb with bare hands use a cloth or glove.
E
Package Contents
F
G
H
Part
A Inner Backplate
B
C
D
E
F
G
H
I
Description
Mounting Screw
Fixture Body
Socket Collar Tool
Socket Collar
Steel Collar
Shade
G9 Bulb
Bulb Shield
Quantity
1pc.
2 pcs.
1pc.
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
A
B
C
D
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
or visit us on-line at www.quoizel.com
1of5
I
June2013
UPTA8602C
FINISH: POLISHED CHROME
16”
6.5” 4.5”
3.5”
8”
4”
5”
4.5”
6”
(2)60W Frosted
G9 Halogen Bulbs
(Supplied)
PART NUMBER
NO.
1
2
3
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
2of5
REQ.
6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPTA8602C
For Style UPTA8602C
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Inner BackplateAttach the (A) to Outlet Box and secure
by threading Outlet Box Screws (not supplied) into the Mounting Holes on the Outlet Box. Tighten until snug.
STEP 2 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture. E. Twist connectors until wires are tightly joined together. F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 1
Outlet Box
Inner Backplate
Outlet Box Screw (not supplied)
Figure 2
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
or visit us on-line at www.quoizel.com
3of5
June2013
6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPTA8602C
For Style UPTA8602C
STEP 3 - Attach Fixture Body to Outlet Box
A. Attach the Backplate of Fixture Body (C) over the Inner
Backplate (A) and secure with the Mounting Screws (B).
tighten until snug.Flathead screwdriver
STEP 4 - Attach Shade to Fixture Body
A. Place the Shade (G) and the Steel Collar (F) over the
Socket as shown. By using the Socket Collar Tool (D)
threading the Socket Collar (E) onto the Socket. Hand
tighten until snug.
Backplate
Fixture Body
Inner Backplate
Mounting Screw
Socket Collar Tool
Socket Collar
Figure 4
Steel Collar
Socket
Figure 5
Shade
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of5
June2013
6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPTA8602C
For Style UPTA8602C
STEP 5 Install Bulb and Bulb Shield-
Bulb Shield
A. This fixture uses Frosted G9 Halogen Bulbs. Maximum 60
watts. B. Insert bulb and seat properly into place. C. Screw Bulb Shield (I) onto the Socket and hand tighten until
G9 Bulb
snug.
IMPORTANT:
Do not touch the bulb with bare hands use a
cloth or glove.
Socket
Your fixture is now assembled and ready to use.
Enjoy!
Figure 6
CAUTION FOR BULB REPLACING
A. When replace bulb, turn off power and allow lamp to cool. For safety purpose, wear gloves and eye protection. B. If bulb is scratched or cracked, DO NOT use the lamp to avoid breakage during use or installation. C. Use only in fixtures rated for lamps wattage and voltage. D. Lamp operate under high pressure generating intense heat. Prevent contact with liquid and combustible
materials.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of5
June2013
Loading...