6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
For Style UPSP5006IS
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
Quoizel, Inc.
strippers,electrical tape, safetyglasses.
6 Corporate Parkway
Goose Creek, SC
29445
BulbRecommended: (6)Medium Base 75WMaximum
EstimatedAssemblyTime:30-45 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax 631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of8
November2011
UPSP5006IS
FINISH: IMPERIAL SILVER
2.4mm
13Ga
QUOIZEL
GND
R
(Includes 96" Chain)
Overall Height 128”
1"
6.5" Dia.
2
1
(6) 75W A19
Medium Base Bulbs
(Not Supplied)
6.5" Dia.
4
30.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
5.5" Dia.
5”
31” Dia.
3
PART NUMBER
NO.
15006ISUPSP BASE UPSP5006IS
1
2
M2312CHIS
3
4
REPLACEMENT PART DESCRIPTION
CHAIN IMPERIAL SILVER 4' x 4MM SQ.
G2952DI DIFFUSER SANDBLASTED ONE SIDE
S1351MI SHADE MILANO 6" X 6.5" X 5"
2of8
REQ.
1
1
6
6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
For Style UPSP5006IS
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
Description
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Center Column
Shade
Socket Collar
Diffuser
Side Arm
Lock Screw
Stem
Spacer Tube
Crystal
Finial
Fixture Assembly
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
6 pcs.
6 pcs.
6 pcs.
6 pcs.
9 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
A
B
C
D
J
E
K
L
I
M
N
F
G
H
O
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of8
P
Q
R
S
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
For Style UPSP5006IS
STEP 1 Adjust Shade Holder-
A. Unfold support arms on Shade Holder to proper
locations.
STEP 2 - Attach Crystal to Socket Assembly
A. Screw the beaded end of the stem (O) into the coupling
on the bottom center of the socket assembly (S). Hand
tighten until snug.
B. Pass the Spacer Tube (P) and the Crystal (Q) over the
end of the stem (O). Secure by threading the Finial (R)
onto the stem (O). Hand tighten until snug.
Stem
Figure 1
Socket
Assembly
STEP 3 - Attach Center Column to Socket
Assembly
A. Screw the beaded end of the Center Column (I) into the
hex coupling on the bottom center of the socket
assembly (S). Hand tighten until snug.
Spacer tube
Crystal
Finial
Center Column
Hex Coupling
Figure 2
Figure 3
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of8
Socket
Assembly
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
For Style UPSP5006IS
STEP 4 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 5 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Figure 4
Mounting
Hole
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Crossbar
Lock Washer
Hex Nut
STEP 6 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
Nipple
Figure 5
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 6
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of8
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
For Style UPSP5006IS
STEP 7 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop (F) and tighten until snug to secure the
Ceiling Canopy (E).
STEP 8 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop (I).
Ceiling Canopy
Canopy
Lock Ring
Fixture Loop
Outlet Box
Canopy Chian Loop
Figure 7
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
STEP 9 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
or visit us on-line at www.quoizel.com
6of8
Figure 8
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Figure 9
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
STEP 10 - Make Wire Connections
For Style UPSP5006IS
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).
B. Push all slack fixture wire through Canopy Chain Loop (F)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 6.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Supply Wire and
Ground Wire
Supply Wire
and Ground
Wire from
Outlet Box
Canopy Chain Loop
Fixture Chain
Ceiling Canopy
Canopy Lock Ring
Figure 10
Ground wire from supply Ground wire from fixture
Figure 11
STEP 11 Assemble Side Arms-
A. Align the holes on the ends of the Side Arms M to
mounting holes on the side of the Support Arms as shown.
Thread Lock Screws (N) into the mounting holes on the
Support Arms to secure Side Arms(M).
B. Align the hole on the top end of the Side Arm (M) to the
mounting holes on the side of the Center Column (I).
Thread Lock Screws (N) into the mounting holes on the
side of the Center Column (I) to secure the Side Arms (M).
C. Hand tighten all Lock Screws (N) until snug.
()
Center Column
Fixture Assembly
Figure 12
Mounting Hold
Lock Screw
Side Arm
Lock Screw
Mounting Hole
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of8
November2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPSP5006IS
STEP 12 - Attach Shade to Fixture Body
A. Place the Diffuser (L) over the Socket as shown.
Thread the Socket Collar (K) onto the Socket to secure
the Diffuser (L). Hand tighten until snug.
B. Place the shade over the Diffuser properly.(J) (L)
For Style UPSP5006IS
Shade
Socket
Collar
Diffuser
Fixture
Assembly
STEP 13 - Install Bulb
A. standard bulb with a medium screw
This fixture uses
base
. Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Your fixture pendant lamp is now assembled and ready to
use. Enjoy!
Figure 13
Figure 14
Bulb
Socket
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc. November2011
or visit us on-line at www.quoizel.com
8of8
Loading...