6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
Quoizel, Inc.
strippers,electrical tape, safetyglasses.
6 Corporate Parkway
Goose Creek, SC
29445
BulbRecommended: (1)Medium Base DecorativeFilament60W bulbs (provided),
Maximum100W,Alternate bulb (1)23WCFLMaximum.
EstimatedAssemblyTime:20-30 minutes
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Do not touch the bulb with bare hands use a cloth or glove.
Package Contents
I
A
Part
A Crossbar
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
Description
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Fixture Loop
I
6” Rod
12” Rod
Lock Ball
Socket Assembly
Side Arm
Shade
Lock Screw
Bulb
Shade Holder
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
2 pcs.
3 pcs.
1pc.
3 pcs.
1pc.
3 pcs.
1pc.
1pc.
J
B
C
K
L
D
E
F
G
H
O
P
Q
M
N
R
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of7
May2014
UPPS1510BN
FINISH: BRUSHED NICKEL
6”
12”
4
3
6.5" Dia.
R
QUOIZEL
2.4mm
13Ga
GND
1"
59”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
(1)Medium Base
Decorative
Filament 60W
bulbs (provided),
Maximum 100W.
PART NUMBER
NO.
1
2
3
4
G3620SH
I1101EC
9008EXBN01
9007EXBN01
16.5”
1
8” Dia.
10”
2
10” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
GLASS CLEAR 8” D
REPRODC 60W 1910 INCANDESCENT BULB
ROD EXTENSION BRUSHED NICKEL 12"L X 0.63"D
ROD EXTENSION BRUSHED NICKEL 6"L X 0.63"D
2of7
REQ.
1
1
2
2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
STEP 1 Assemble Rods-
A. Determine the Rods (J/K) to be assembled to the Socket
Assembly (M) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (J/K) and then thread the chosen Rods (J/K) and the
Socket Assembly (M) together. Hand tighten until snug.
STEP 2 Assemble to Upper Rod- Fixture Loop
6” Rod
6” Rod
12” Rod
12” Rod
Supply Wire and
Ground Wire
Socket
Assembly
Figure 1
A. Pass Supply Wires and Ground Wire through the Fixture
Loop (I) then thread the Fixture Loop (I) and the Upper
Rod together. Hand tighten until snug.
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Figure 3
Mounting
Hole
Fixture Loop
Supply Wire and
Ground Wire
Upper Rod
Figure 2
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of7
May2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
STEP 4 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 4
STEP 5 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop and hand tighten until snug.
STEP 6 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop and tighten until snug to secure the Ceiling
Canopy (E).
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 5
Outlet Box
Canopy Chian Loop
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Ceiling Canopy
Canopy
Lock Ring
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of7
Figure 6
May2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
STEP 7 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. You may need to use plier to open the chain links. If so,
put a cloth over the chain to protect the finish from the
pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop (I) on the
top of the fixture.
STEP 8 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
Fixture Loop
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Figure 7
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of7
Figure 8
May2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
STEP 9 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain.
B. Push all slack fixture wire through Canopy Chain Loop into
Outlet Box. Trim excess fixture wire leaving a minimum of 6
inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to Ribbed
side Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth side Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 6.
Supply Wire
and Ground
Wire from
Outlet Box
Canopy Lock Ring
Supply Wire and
Ground Wire
Canopy Chain
Loop
Ceiling
Canopy
Fixture Chain
Figure 9
White wire from supply Ribbed side wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Smooth side wire from fixture
Figure 10
STEP 10 Assemble Side Arm to Socket
-
Assembly
A. Line up the Mounting Hole on the SocketAssembly (M)
and the Hole on the Side Arm (N), secure by thread the
Lock Ball (L) into the Mounting Hole on the Socket
Assembly (M). Hand tighten until sung.
Lock Ball
Side Arm
Socket
Assembly
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of7
Figure 11
May2014
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-UPPS1510BN
For Style UPPS1510BN
STEP 11 Attach Shade to Fixture-
A. Place the Shade (O) into the Shade Holder (R). Line up the
Mounting Hole on the Shade Holder (R) and Holes on the
bottom end of the Side Arms (N). Secure by threading the
Lock Screws (P) into the Studs on the Shade Holder (R).
Hand tighten until sung.
Figure 12
Side Arm
Lock Screw
Shade
Shade Holder
Stud
STEP 12 - Install Bulb
A. This fixture uses standard bulb 60W (supplied) with a
standard screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your lamp wall fixture is now assembled and ready to use.
Enjoy!
Figure 13
Socket
Bulb
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of7
May2014
Loading...