Quoizel TY8602AN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS TY8602STYLE NUMBER TY8602AN,TY8602WT,TY8602C:
PACKAGE CONTENTS
Part
A
Crossbar
Green Ground Screw
B
Nipple
C
Lock Washer
D
Hex Nut
E
Lock Ball
F
Steel Collar
G
Socket Collar
H
Shade
I
Fixture Body
J
Socket Collar Tool
K
!
WARNINGS AND CAUTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
Description
Quantity
1pc
1pc
1pc
1pc
1pc
1pc
2pcs
2pcs
2pcs
1pc
1pc
ISSUED 08-2008
A
B
C
D
E
F
G
H
Revised 2011-03-08
I
J
K
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 10 20 minutes
● Tools Required for Assembly (not included): Flathead screwdriver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &2, 100 Watt Type A Medium Base Bulbs.
● Helpful Tools (not included): Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a Thread the Hex Nut onto the top end of the Nipple Place
..
the Lock Washer over the top end of the Nipple and then
thread the Nipple into the center hole of the Crossbar
b. Adjust the Nipple and make sure there is proper length
extruded for the Fixture Body
c. Using pliers thread the Hex Nut against the Crossbar and
tighten until snug
d. Secure the Crossbar to the Outlet Box with Outlet Box
Screws Hand tighten until snug
,
.
..
,
,-
Crossbar
Outlet Box
.
.
Lock Washer
Hex Nut
Nipple
Screw
1OF2
INSTALLATION INSTRUCTIONS
STEP 2:
*()
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
Wire.
.()
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
.()
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
().
()
carefully stuff all of the connected wires into the Outlet
.
Box
STEP 3:
a Place the Backplate over the Nipple and secure with the
.
Lock Ball. Hand tighten until snug.
STYLE NUMBER TY8602AN, TY8602WT: , TY8602C
WHITE OR RIBBED
FROM HOUSE
BLACK OR RED WIRE()
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
Backplate
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
Lock Ball
STEP 4:
a Place the Shade and the Steel Collar over the Socket as
.
shown. Using Socket Collar Tool (Supplied), thread the
Socket Collar onto the Socket to secure the Shade. Hand
tighten until snug.
Crossbar
Nipple
Socket Collar
Tool (Supplied)
Socket Collar
Steel Collar
Shade
Socket
STEP 5 :
a Install correct bulbs referring to fixture markings and or labels for maximum wattage./.
.. .Your installation is completed now Restore electricity Retain this sheet for future reference
2OF2
Loading...