Quoizel TT8604BN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
OUTLET BOX
..
,.
SWIVELCROSSBAR
SOCKET COLLAR
(2)OUTLET BOX SCREWS
(not supplied)
BACKPLATE
SHADE
SOCKET
INSTALLATION INSTRUCTIONS
1. Before beginning the installation, carefully unpack and identify all parts
referring to illustration.
2 Turn the electrical power to installation point OFF at circuit breaker
..
3 Locate the SWIVEL CROSSBAR and installthe (2) MOUNTING SCREWS
.
into the outside holes as shown in the illustration. Next, secure the SWIVEL
CROSSBAR to the OUTLET BOX withthe 2 OUTLET BOX SCREWS
not supplied
().
()
4. Make the connections: Use wire connectors(not supplied)connect the wires
as shown below:
-HOUSE WHITE WIRE to FIXTURE WHITE (or RIBBED SIDE) WIRE
-HOUSE BLACK WIRE to FIXTURE BLACK (or SMOOTH SIDE) WIRE
-HOUSE GROUND WIRE to FIXTURE GROUND WIRE
Wrap each finished connection with approved electrical tape.
5. Carefully tuck all wires into the OUTLET BOX and position the fixture over the
outlet box. Alignthe HOLES in the BACKPLATE with the 2 MOUNTING
()
SCREWS attached to the SWIVEL CROSSBAR. Pass the fixture and
(2)SHAKE PROOF WASHERS
over the 2 MOUNTING SCREWS
()
and secure by threading (2)MOUNTING BALLS onto the end of screws. Hand
tighten until snug.
,
(2)MOUNTING SCREWS
FIXTURE SUPPLY WIRE
and GROUND WIRE
6. Position SHADES over the SOCKETS and secure them by threading
SOCKET COLLARS onto SOCKETS. Hand tighten until snug.
7 Install bulbs referring to fixture markings and or labels for maximum wattage
./.
8 Restore power to the installation point ON. Retain this sheet for future reference.
.
(2)MOUNTING BALLS
(2)SHAKE PROOF WASHERS
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
IS TT8742
-
2006-11-10
Loading...