BulbRecommended: (3)Medium Base DecorativeFilament60W bulb (suppled),
Maximum100W.
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Description
Nipple
Lock Washer
Hex Nut
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Ceiling Canopy
Fixture Loop
Spacer
Fixture Body
Ring
Shade
Shade Holder
Lock Ball
Bulb
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
3 pcs.
3 pcs.
A
B
C
D
E
F
G
H
I
J
K
L
N
O
P
M
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of7
May2014
Page 2
TRG1816OZ
FINISH: OLD BRONZE
2.4mm
13Ga
QUOIZEL
GND
R
1
5” Dia.
1”
Overall Height 70”
(Includes 48” Chain)
(3)Medium Base
Decorative Filament
60W bulbs (provided),
Maximum 100W.
20”
2
5.5”
11.5” Dia.
16” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBERREPLACEMENT PART DESCRIPTION
NO.
M2374CHOZ
1
2
G3643SH
CHAIN OLD BRONZE 3.8MM X 4'
GLASS CLEAR SEEDY 16"D
2of7
REQ.
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TRG1816OZ
For Style TRG1816OZ
STEP 1 - Attach Fixture Loop to Fixture Body
A. Place Spacer (J) over the Nipple on the top of Fixture
Body (K), secure by threading Fixture Loop (I) onto the
Nipple. Hand tighten until sung.
STEP 2 - Install Shade
A. Attach the Shade Holder (N) onto the end of the Side
Arms. Secure by threading the Lock Ball (O) into the
ends of the SideArms. Hand tighten until snug.
B. Place the Shade (M) over the Fixture Body (K), seat
onto the Shade Holder (N). Proceed to place the Ring
(L) over the Fixture body (K), seat onto the top edge of
the Shade (M).
Fixture Loop
Spacer
Nipple
Fixture Body
Figure 1
Ring
Shade
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of7
Fixture Body
Side Arm
Shade Holder
Lock Ball
Figure 2
May2014
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TRG1816OZ
For Style TRG1816OZ
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 4Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Figure 3
Mounting
Hole
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Crossbar
Lock Washer
Hex Nut
STEP 5 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
Outlet Box
Crossbar
Lock Washer
Canopy
Chain Loop
Nipple
Figure 4
Nipple
Hex Nut
Figure 5
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of7
May2014
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TRG1816OZ
For Style TRG1816OZ
STEP 6Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (H) upward over the Outlet
Box. Thread the Canopy Lock Ring (F) onto the Canopy
Chain Loop (E) and tighten until snug to secure the
Ceiling Canopy (H).
Canopy Chian Loop
Ceiling Canopy
STEP 7Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (G) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (G) onto the
Canopy Chain Loop (E) and then attach the other end of
the Fixture Chain (G) onto the Fixture Loop on the top of
the fixture.
Canopy
Lock Ring
Fixture Loop
Figure 6
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Figure 7
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of7
May2014
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TRG1816OZ
For Style TRG1816OZ
STEP 8Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (G) alternating links. Push the wires up
through the Canopy Chain Loop (E) into the outlet box.
STEP 9 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (F) and slide Canopy Lock
Ring (F) and Ceiling Canopy (H) down the Fixture Chain (G).
B. Push all slack fixture wire through Canopy Chain Loop (E)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to Ribbed
side from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth side from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (H) as shown in Step 6.
Canopy Chain
Loop
Supply Wire and
Ground Wire from
Outlet Box
Fixture Chain
Supply Wire
and Ground Wire
Figure 8
Supply Wire and
Ground Wire
Canopy Chain
Loop
Fixture Chain
Ceiling Canopy
Canopy Lock Ring
White wire from supplyBibbed side from fixture
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Smooth side from fixture
Figure 10
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
or visit us on-line at www.quoizel.com
6of7
Figure 9
May2014
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TRG1816OZ
For Style TRG1816OZ
STEP 10Install Bulb-
A. This fixture uses standard bulb 60W (supplied) with a
standard screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 12
Bulb
Socket
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of7
May2014
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.