Quoizel TRG1712OZ User Manual
Assembly Instruction Sheet #IS-TRG1712OZ
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
,.
For Style TRG1712OZ
ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver,pliers,wire cutters, wire strippers, electricaltape,
safetyglasses.
BulbRecommended: (1) MediumBase Decorative Filament 60W bulbs (provided),Maximum 100W,Alternate
bulb(1) 23W CFL Maximum.
EstimatedAssembly Time:30-45minutes
Preparation:Identify and inspect all partsbeforebeginning installation. Check package contentlist and diagrams
belowto be sure all partsarepresent. If any parts aremissing or damaged, do not attemptto assemble, install, or
operatethe fixture. Contact customer serviceforreplacement parts.
Package Contents
Bottom Shade
D
Holder
x1
Fixture
Body
A
x1
Lock Ball
E
x3
Top Shade
B
Holder
x1
Shade
C
x1
STEP 1 Install Crossbar-
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included) Tighten until snug
..
Mounting Ball
F
x2
Bulb
G
x1
Hardware Contents
Crossbar Assembly
AA
x1
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side Wire
from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
STEP 3 Attach Fixture Body to
-
Mounting Screw
Ribbed side wire
from fixture
Smooth side wire
from fixture
Ground wire
from fixture
Figure 2
Figure 3
Green Ground Screw
2014 Quoizel Inc.
Outlet Box
AA
Outlet Box Screw
(not included)
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
Figure 1
A. Place the Ceiling Canopy (A)
over the Mounting Screws and
secure with Mounting Ball (F).
Hand tighten until snug.
1of2
Mounting
Screw
F
A
March2014
STEP 4 Install Shade-
A. Place the Top Shade Holder
(B), Shade (C), and Bottom
Shade Holder (D)over the
Nipple on the Fixture Body (A),
secure by threading Lock Ball
(E) into the Nipple, hand
tighten until sung.
Figure 4
A
Nipple
B
STEP 5 Install Bulb-
A. This fixture uses
standard bulb 60W
(supplied) with a
standard screw base.
Maximum 100 watts.
B. Insert bulb and screw
properly into place.
Your fixture is now
assembled and ready to
use. Enjoy!
C
Socket
Bulb
TRG1712OZ
FINISH: OLD BRONZE
(1)Medium Base
Decorative
Filament 60W
bulbs (provided),
Maximum 100W.
PART NUMBER
NO.
1
D
E
5”Dia.
8.5”Dia.
12”Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
1”
REQ.
Figure 5
10”
5”
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
2of2
March2014
Loading...