Quoizel TFT13993EBC User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

..

ToolsRequired: Flatheadscrewdriver,Phillipsscrewdriver, pliers,wirecutters, wire strippers,electricaltape, safety glasses.
Bulb Recommended:
EstimatedAssembly Time:
Preparation:

present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement
parts.

,.

(2)MediumBase 75W Maximum,Alternate bulb (2)19WCFL

20-30minutes

Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are

Assembly Instruction Sheet #IS-TFT13993EBC

For Style TFT13993EBC

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.

INSTALLATION

A. Thread SocketAssembly onto

the Base. Pull the cord from the
Base as you assemble the parts
together to remove the excess
cord between parts.

B. Place Spacer and Check Ring

over the Nipple, secure by
threading Small Knurled Nut onto
the Nipple, tighten until sung.

C. Thread Big Knurled Nut onto the

Nipple, place Flat Washer and
Shade over the Nipple, secure by
threading the Finial onto the
Nipple. Hand tighten until sung.

D. This fixture uses standard bulb

with medium base . Maximum 75
watts. Insert bulb and screw
snugly into place.

Your fixture is now assembled
and ready to use. Enjoy!

Socket Assembly

Shade

X1

Flat Washer

X1

Small

Knurled Nut

X1

Nipple with

Hex Nut

X1

X1

Finial
X1

Big
Knurled Nut
X1

Check Ring
X1

Spacer
X1

TFT13993EBC

FINISH: BURNT CINNAMON

18”Dia.

2

7”

3

28”

1

8”Dia.

2014 Quoizel Inc.

Base

X1

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

(2) 75W

NO.

1

2

3

1of1

NO.

Medium

Base

Bulb

(Not Supplied)

PART NUMBER

113993ET

C108FIR

G6291SH

NOTE: ALL DIMENSIONS ARE ROUNDED

UP TO THE NEAREST 1/2"

REPLACEMENT PART DESCRIPTION

BASE

FINIAL

GLASS

REQ.

1

1

1

May2014