Quoizel TFSM8701VB User Manual
Assembly Instruction Sheet #IS-TFSM8701VB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
,.
For Style TFSM8701VB
ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver,pliers,wire cutters, wire strippers, electricaltape,
safetyglasses.
BulbRecommended: (1) MediumBase 75W Maximum,Alternatebulb (1) 19W CFL
EstimatedAssembly Time:20-30minutes
Preparation:Identify and inspect all partsbeforebeginning installation. Check package contentlist and diagrams
belowto be sure all partsarepresent. If any parts aremissing or damaged, do not attemptto assemble, install, or
operatethe fixture. Contact customer serviceforreplacement parts.
Package Contents
Fixture Body
A
x1
C
Lock Ball
x2
D
STEP 1 Install Crossbar-
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included) Tighten until snug
..
Outlet Box
AA
Outlet Box Screw
(not included)
Green Ground Screw
STEP 2 - Wire Connections
Shade
B
x1
Socket Collar
x1
Figure 1
2.4mm
Hardware Contents
13Ga
QUOIZEL
GND
R
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
STEP 3 Attach Fixture Body to Mounting Screw-
A. Place the Backplate of the Fixture Body (A) over the Mounting
Screws and secure with Lock Ball (C). Hand tighten until snug.
Crossbar Assembly
AA
x1
Ribbed side wire
from fixture
Smooth side wire
from fixture
Ground wire
from fixture
Backplate
C
Figure 2
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side
Wire from fixture.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
1of2
Mounting Screw
A
Figure 3
December2013
STEP 4 Attach Shade to Fixture
-
Body
A. Place Shade (B) over the
Socket, secure by thread the
Socket Collar (D) onto Socket.
Hand tighten until snug.
Figure 4
STEP 5 Install Bulb-
Figure 5
A. This fixture uses standard bulb
with medium screw base.
Maximum 75 watts.
B. Insert bulb and screw snugly
Socket
into place.
Socket
Your fixture is now assembled
and ready to use.
B
Enjoy!
TFSM8701VB
FINISH: VINTAGE BRONZE
GND
2.4mm
13Ga
QUOIZEL
R
D
5” Sq.
Bulb
10”
12”
7”
(1) 75W
Base
(Not Supplied)
PART NUMBER
NO.
1
2013 Quoizel Inc.
Medium
Bulbs
5.5” Sq.
8.5” Sq.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2of2
December2013
Loading...