BulbRecommended: (2) Medium Base 60WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginning installation.Checkpackage
contentlist and diagramsbelowto be sure allpartsare present. Ifanyparts are missing
ordamaged, do notattemptto assemble, install, oroperatethe fixture. Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
G
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
J
K
L
M
N
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
1/8 Hex Nut
Stem3½”L
I
Spacer 3 1/8”L
Check Ring
Knurled Nut
Flat Washer
Shade
Finial
Quantity
1pc
2pcs
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
A
B
C
D
M
E
F
H
I
J
K
L
N
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of6
April2013
Page 2
TFNO1714VA
FINISH: VALIANT BRONZE
1
6.5” Sq.
GND
1”
2.4mm
13Ga
QUOIZEL
R
(2)60W
Medium Base Bulbs
(Not Supplied)
8.5”
6”
2
13.5” Sq.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
1
2
G3586SH
3
8750KIT
REPLACEMENT PART DESCRIPTION
KITREPLACEMENTVALIANT BRONZE
TIFFANY SHADE 13.5”SQ
REQ.
1
1
2of6
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TFNO1714VA
For Style TFNO1714VA
STEP 1Install Nipple with Hex Nuts to
-
Socket Assembly
A.1/8G
ThreadHex Nut ( ) onto the short nipple end of
Stem ( ) then thread have Hex Nut ( ) end of Stem ( )
into the Hex Coupling on the top of( ).
HGH
Fixture Body F
Hand tighten until snug.
STEP 2Attach Spacer to Fixture-
A. Place the Spacer (I) and Check Ring (J) over the Stem
(H). Secure by thread the Knurled Nut (K) onto the
Stem(H). Hand tighten until snug.
Figure 1
Fixture Body
Coupling
1/8 Hex Nut
Stem
Figure 2
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of6
Stem
Spacer
Check Ring
Knurled Nut
April2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TFNO1714VA
For Style TFNO1714VA
STEP 3 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
STEP 4 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Figure 3
Mounting Screw
Lock Washer
Ceiling
Canopy
Figure 4
Mounting
Hole
Crossbar
Hex Nut
Outlet
Box
Crossbar
Outlet Box
Screw
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of6
April2013
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TFNO1714VA
For Style TFNO1714VA
STEP 5Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supplyWhite wire from fixture
Figure 5
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 6
STEP 6 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy on the top of the Fixture Body
(F) over the Mounting Screws (B) and secure with
Mounting Balls (E). Hand tighten until snug.
Fixture Body
Ceiling
Canopy
Figure 7
Mounting
Screw
Mounting
Ball
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of6
April2013
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TFNO1714VA
For Style TFNO1714VA
STEP 7 - Attach Shade to Fixture
A. Place the Flat Washer (L) and Shade (M) over the Stem
(H) on the bottom of fixture, secure by thread the Finial
(N) on to the Stem (H). Hand tighten until snug.
STEP 8Install Bulb-
A. This fixture uses standard bulb with a standard screw base.
Maximum 60 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 8
Stem
Flat Washer
Shade
Finial
Figure 9
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Socket
Bulb
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of6
April2013
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.